HomelinessGardening

Plates of slate with their own hands

For many owners the garden is not only a source of useful harvest, but also an additional decoration for the house. Cute beds of slate look great in any garden. Create these simple and easy-to-use products under the power of each person. Neat strips will not allow the earth to crumble and will stand for a long time.

What good are the fences of slate?

Asbestos-cement slabs intended for the formation of garden paths are good for high strength, water and fire resistance, ability to protect plants from rodents. Products are quickly replaced and easily transferred. The boards decay in a few seasons, and the fencing for beds of slate is very durable. Wavy sheets give the site a well-groomed appearance. You can buy them in different construction stores.

Placing beds in various places depending on the landscape design. What they take shape, the land owner decides. They can be square, rectangular, in the form of a trapezoid or polygon. To create a beautiful flowerbed, you can use colored materials or apply unusual drawings to the slate. As an ornament, nice flowerpots or flowerpots with flowers are suitable, and also decorating with smooth stones, which can be repainted in color, in harmony with the design of the site. This creates an original garden style.

How to make beds from corrugated slate?

When creating a flowerbed, you can use asbestos-cement sheets with waves. Gofre is located along or across it. The process of making beds from slate with your own hands is very simple.

  1. Across or along the waves (at the discretion of the owner of the garden), the plates of the required size are to be poured.
  2. Indicate the boundaries of the future bed, digging a trench (depth - just under half the height of the product).
  3. Place the blanks in the excavated fossa.
  4. Fill them with earth and compact them for stability.
  5. Support the sheets with metal pegs.

When deciding how best to install corrugated asbestos-cement sheets (along or across the soil), certain subtleties should be considered. If some representatives of the flora are fenced off with a slate with horizontally arranged waves, the shoots can grow along the depressions. During the digging up of the land, there is a risk not to calculate the strength and break the fence. Vertically arranged strips do not have such disadvantages, but they are truncated a bit more complicated.

Creation of beds from flat plates

Of the corrugated sheets you can drink the required number of fences with practically no waste, but it is not so easy to make beds from flat slate. Prefer the slate is 1.75 m in size . The algorithm is simple.

  1. Divide the workpiece into two parts: 1 meter and 75 cm.
  2. Make a hole in the ground (about 20 cm).
  3. Put the sheets in prepared pits.
  4. Fall asleep with earth, carefully tamper.
  5. Cut the metal corners.
  6. Drill holes in the slate for bolts.
  7. Connect the metal plates to the asbestos-cement sheets.
  8. That there was no corrosion, paint or handle the primer corners.
  9. When everything is dry, fall asleep organic fertilizer: brushwood, wood particles, compost and soil.

It should be remembered that when installing a bed of slate you can not drive a fence into the ground, otherwise it will break.

Features of work

For making strips of the material in question, the Bulgarian is the most suitable. It cuts everything: iron, stones, bricks, pipes and slate. Use it must be so that the wind carries the dust aside. Since asbestos-cement dust is harmful to health, it is necessary to wear protective goggles and a cotton-gauze dressing. In no event should you use a saw on the tree, otherwise you can cause serious injury to your hands.

Advantages of slate fencing

The material in question is remarkable in that it can be used for very long beds. It is not difficult to arrange the sides at the same height, since the depth can be controlled by the force of pressing into the soil. Asbestos-cement plates have other advantages:

  • Easily heated in the sun and increase the temperature of the soil by several degrees, which speeds up the process of obtaining nutrients by the plant;
  • The material is robust and reliable;
  • Products are convenient and practical in use;
  • low cost;
  • Asbestos-cement strips are very durable;
  • Surrounded by slate beds harmoniously look in any garden.

Strips for beds from slate can be painted in any color, which will further ennoble the owner's garden.

Disadvantages of beds from slate

In addition to the above advantages, asbestos cement products have disadvantages:

  • In severe heat the material overheats from both sides, because of which the moisture evaporates faster from the soil;
  • It is often necessary to correct the slate, because the ground is washed out due to rain, and the strips are tilted.

Many people who want to make beds from the slate themselves, ask the question of how this material affects human health. In fact, only asbestos-cement dust causes harm. Since the slate is a finished pressed product, it is completely harmless.

Features of the formation of beds

Those wishing to understand how to make a row of beds from a slate should follow a few simple rules.

  1. It is necessary to plant plantations from east to west.
  2. Fencing high land platforms, the slate is lowered to a depth equal to just over half the height of the sheet.
  3. At the bottom of the future bed should be laid compost, and on top of it pour a layer of land.
  4. For sealing, many people use sawdust, strictly observing the proportions.
  5. In between plantations, you can plant a lawn, it will look great in the garden.

These simple principles will help gardeners make a beautiful flowerbed.

Features of high beds

Gardeners can make beds of slate in height from 50 to 70 cm. They are ideal for areas with an infertile layer of land, since they allow creating a perfectly balanced soil for plants. Cultivated crops practically do not get sick and do not require treatment with chemical preparations. This positive side of high beds can not be missed, because eco-friendly products are the guarantee of health.

High beds of slate do not need to be dug often, enough time to loosen the soil. Care should be taken to watering, because with too frequent moistening, water can stagnate. Such structures are much easier to weed, since you do not need to bend low. They are an ideal option for the cultivation of annual plants, and perennials will feel uncomfortable in them.

High beds from slate provide twice or three times more harvest than usual. They protect plants from sudden frosts. To ensure that the bed does not disintegrate and the structure does not break, it is necessary to make a screed. To do this, on the opposite walls in the middle holes are made through which the wire extends and fixes. Additional fastening is done in several places depending on the length of the product. For the stability of high beds, it is recommended to dig in metal pipes (2/3 of the height should be in the ground). They will become an additional support.

Observing all these simple principles, you can independently make any beds of slate and get a decent reward for your work in the form of harvest.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.