"Makita 9069" (Makita) - USM. Reviews

The Bulgarian, like any other power tool, must be selected according to certain criteria, otherwise the capacity may not be sufficient or additional functions will be superfluous. The first of these are the scope of use, as well as the intensity of operation. If you plan to use the equipment only twice a year, then it is better to abandon the professional model, it is recommended to prefer a domestic option instead.

Basic selection criteria

The angle grinder can have a different number of handles. In more serious models there are two, on this depends not only the quality of work, but also safety. Specialists pay attention to the minimum size of the disk. For the simplest work, it will be enough to have a diameter of 115 mm. But 230 mm will be able to cut almost everything:

• brick;
• Pipes;
• Plates.

The optimal choice will be 125 mm diameter of the disk. These parameters you can do when repairing the apartment. As for professionals, they usually have in their arsenal several tools for performing different tasks. Among others in the store you can find an angle grinder "Makita 9069" (Makita). If you decide to review this model, you should read the reviews in more detail, they will be discussed below.

Opinions about the main features

Makita 9069, reviews of which it would be useful to read, will cost the consumer 5600 rubles. It is a tool designed for stripping metal products, as well as for grinding surfaces. Consumers emphasize that the equipment has a powerful enough engine for 2000 W, which provides continuous continuous operation.

Additional functionality is the fixing of the start switch, which is very convenient for operation. The operator will be able to fix the spindle, which is why the replacement of disks will not be accompanied by difficulties. Consumers emphasize that the handle can be installed in one of three positions, this guarantees the possibility of working with the tool even in hard-to-reach places.

Reviews about technical characteristics

"Makita 9069" (Makita) is a tool with a disc diameter of 230 mm. Such parameters attract not only home masters, but also specialists. Consumers emphasize an impressive number of revolutions, which reaches 6,600 per minute. The device weighs only 4.2 kg, the box comes in a set, and the equipment length is 458 mm.

Before buying, buyers, with their words, especially pay attention to characteristics like a smooth start, super flange and the presence of a vibrator. This is all there is in the described model, as well as maintaining constant revolutions under load, a quick-clamping nut and electronic speed control. However, the length of the cable is 2.5 m, which allows you to work with high comfort.

The tool is ready to last a long time, because it has a protection against engine overheating. Without the equipment to adjust the position of the casing, the operator can not, this feature consumers consider a minus. "Makita 9069" (Makita) is equipment with which you can work with stone or concrete. However, you must remember that there is no protection against unintentional starting.

Reviews about the positive features

"Makita 9069" (Makita) is a tool with which, according to customers, it is very convenient to work. After all, it has an additional handle, which allows you to choose a convenient position for work. It is quite easy to monitor the operation of the unit. This is guaranteed by a reliable grip that flows into the ergonomic handle. At the operator at long work of fatigue should not arise, after all controls are located on the handle very conveniently.

Home masters also like safety. The casing guarantees protection from dust and sand. "Makita 9069" (Makita) - USM, which has, according to customers, many advantages like:

• Double protective insulation;
• Easy access to brushes;
• Powerful engine;
• Labyrinth seal;
• Fixing the spindle.

Due to the sealing, the bearings and the motor are reliably protected from contamination. One can not ignore the easy access to the brushes as well, because sometimes they need to be replaced.

Solve even the most difficult tasks can be using a tool, because it has a powerful engine. If necessary, the operator can replace the wheels quickly and safely, which is ensured by fixing the spindle.

Reviews about replacing carbon brushes

"Makita 9069" (Makita), whose brushes should be replaced from time to time, is a tool that is easy to maintain. When the brushes wear out, when the insulating rubber tab touches the collector, the equipment stops automatically. If this happens, the brushes must be replaced, it must be done in pairs. To ensure reliable and safe operation, consumers are advised to pay attention to the fact that it is better to entrust the adjustment and maintenance to specialists. If you plan to do it yourself, then you must use only original spare parts and consumables.

After considering the features and benefits, you can also get a tool "Makita 9069" (Makita) - USM. 230 mm, 2000 W, 6600 rpm - all specified technical characteristics are relevant for the described model. It is useful to know when a tool needs maintenance. Among other manipulations, it is necessary to distinguish the replacement of carbon brushes. To perform the work, it is necessary to unscrew the screws of the small covers, then you can start replacing the burnt elements.

In some modifications of the described model it is necessary to disassemble the Bulgarian, for this it is necessary to find fixing screws. If the handle consists of two parts, then pull the cord to the side does not have to.

Conclusion

Once you disassemble the handle, you will be able to find the brushes that are in the holders. The construction of the latter, according to customers, can be different. However, the brushes should be disconnected from the electrical circuit of the tool. To do this, the tips are removed, only after you can study the design of brush holders.