Installation of diamond drilling: precise holes in any materials

The installation of diamond drilling refers to the equipment and tool, the manufacture of which uses the most solid mineral. The diamond can be of both natural and artificial origin. In industry, the mineral, as a rule, is used in the form of powders applied to the cutting surface. Provides diamond drilling equipment that has a relatively higher price relative to alternative means used to create holes in concrete, stone, foam concrete and other building materials. But the value of the tool of production should not become a determining factor. The installation of diamond drilling has a number of undeniable advantages.

First, minimal effort is required to work with this equipment. This is due to the fact that the tool is very sharp. This property of the tool also makes it possible to reduce the heating at the cutting site in comparison with the rest of the drills. Secondly, the installation of diamond drilling guarantees the obtaining of almost ideal holes in a short period of time. The quality of the surface treatment can additionally be increased by combining the cutting action of the mineral with grinding using electric current or ultrasound. The installation of diamond drilling minimizes dynamic loads on the material being processed. With this method of making holes, the noise and vibration levels are significantly lower than with traditional tools. All this ensures the safety of building structures and reduces their damage during processing. A wide range of diameters of crowns used in drilling makes it possible to obtain holes of up to 500 mm in one operation. This is a significant advantage in terms of performance. As a rule, after using this tool, no additional processing methods are required. The installation of diamond drilling is an optimal equipment if it is required to make holes in a non-uniform material, for example, reinforced concrete.

There are two ways to work with a diamond tool: dry and wet. Drilling technology in the second way requires cooling the cutting plane with water, which, together with the dust, is removed with a special suction. In this regard, the production of work with a drill, perhaps only if there is power and water supply. The hardness (softness) of the bond of the diamond layer influences the service life and performance of the crowns, the softer it is, the faster the tool wears out.

Among the main types of work, where the use of this equipment is efficient, it is possible to name the device of holes for: the installation of air conditioning systems, ventilation elements (vents, openings in walls and partitions), laying electric cables, laying pipes for water and sewerage, communication lines, heating systems and .P. The main criteria that should be used when choosing this method of making holes are time, quality and cost.