How to use a self-service wash? Tips and Tricks

Throughout Russia and the CIS countries, self-service washers have recently become popular. This is an excellent alternative to the usual washers. Do not wait 30-60 minutes until the car is glossed over. The cost of such an operation is much cheaper. But how to use a self-service wash in St. Petersburg and other regions? Let's consider.

Read instruction

This is the first thing that the owners say, answering the standard question of the car enthusiast, who is interested in: "How to use the self-service wash?" And indeed, practically at each station such instruction on the operation of equipment is available. But it is clear that one instruction is not enough. Let's look at each stage of use to get a high-quality result. Virtually all types of washing of this type offer the client a minimum of five possibilities:

• Pre-cleaning.
• Basic.
• Rinsing.
• Body coating with wax.
• Application of gloss.
• Drying.

Sometimes the service for cleaning wheel rims, which takes 15 seconds.

Preliminary stage

So, at the very beginning it is suggested to use a prewash. It is needed in order to make the dirt softer and raise it, without damaging the car body. Usually they pour the entire body. And to make it effective, it is better to wash from the top down. The gun should not be held closer than 25-30 cm from the body. How to use a self-service wash? At this stage, there is no need to rinse all the dirt completely. From the gun is not supplied with ordinary water, but a special solution. Its active ingredients work with dirt, but do not wash it off. Most car washes take about 45 seconds at this stage. This time is enough for pre-processing of cars and SUVs.

Basic car wash

Here everything is clear from the title. Let's see how to use the self-service wash at this stage. With the help of distance changes, as well as the angle of the gun, it is necessary to thoroughly clean all dirty places on the body with hot foam. The solution is fed under pressure. At this stage, no more than 120 seconds are allowed. To get a better effect, the solution is applied and washed off horizontally. In this case, you need to move from the bottom up the sides of the machine. Initially, the side parts of the body are processed. Then the back and front parts. At the very end of the process, the roof, hood and trunk are washed. This is how it is recommended to work with this device.

Rinse Mode

This mode is designed to remove active foam from the body surface. No need to exert effort, since this is not the last stage. According to the owners of car washes, the average car owner should spend no more than a minute on this procedure.

Waxing

A thin layer of wax coating protects the body from the effects of dirt, dust, various chemical reagents that "eat with appetite" not only ice and snow, but also metal. The coating process will also take about a minute, depending on the specific washing.

Gloss and drying

This procedure, as it turns out, is not less important for a qualitative result. If you select this option, the driver receives a special demineralized water in which a special substance is diluted. It accelerates the drying process. Wipe the car is not necessary. We have my car on a self-service car wash, and there are no rags and bastards here. In addition to the protective function, this coating will give LCP a shine. This procedure takes two minutes.

Experts recommend

Especially important in the whole process, the last program is rinsing. But with the use of not ordinary water, but the one that went through osmosis. The demineralized liquid is thoroughly filtered. If you stop on an ordinary rinse, then from the gun is fed ordinary water, after which there will be streaks and stains on the body. It is the latter procedure that will make the car perfectly clean. It also includes drying. But this is not a huge hair dryer, but a special chemical that helps the water to escape faster from the surface of the body.

How to use a contactless self-service wash? Those who have already tried this service have identified several points for themselves.

One of the problems when motorists complain about a poor-quality car wash is the failure to use all the provided programs. When choosing a wash using only active foam and water, without using wax and osmosis, the car will not be clean. The paintwork will quickly get dirty and will dry longer. Not everyone knows how to properly use the self-service wash so that the result is as effective as possible.

Quality washing in 7 minutes

The creators of these complexes have thought of everything so that the user can completely clean his car from dirt for 7 minutes. To do this, use all the options. But visitors to such washes in profile forums write reviews in which they do not agree with this. The main thing that can be distinguished from these reviews is the weak pressure of the water supply. Instead of a high-quality active foam, only a little soapy water is supplied. With such chemistry, it is difficult to achieve purity. You can only slightly remove dust, small dirt or snow. Sometimes these or other options may not work. Chemistry does not please with its strength. And how to wash a car in a self-service washroom in such conditions?

The owners of the sinks are responsible for the chemicals. They control the level of concentration of chemicals in the machine, as well as the strength of the water supply pressure. Ideal situation - when the main washer the gun is kept with a slight tension. Low head pressure is a service problem that should be eliminated. Very rarely there are car washes, where the motorist himself regulates the amount of chemistry and water pressure. But this is usually an expensive self-service wash. How to use the winter? If all systems work as they need, then there will not be problems even in a frigid frost. The main thing is not to use cold water.

Modes

Such washes exist for a long time already, and drivers have learned to adapt to the program modes for them. Someone first applies active foam to the bodywork and waits for it to act. Others keep the gun almost back-to-back to the body. You should wait a little after each option. The third category of drivers generally changes options in places. That's what professionals say about how to use a self-service wash. The instruction is correct. But if the car did not wash during the winter, first you should visit a hand wash. There the body is degreased. And then you can come to an automatic sink, which will simply maintain a clean state. Only in this way will self-service washing be effective. How to use it, we have already considered.

Results

Naturally, with simple pollution such services will cope with a bang. It is important only to develop your skills or be guided by what is written in the manual. It is necessary to understand that for a good effect, all options should be used. If the car is in a neglected state, then with a mud cake such washes can not cope. It is necessary to go to the manual, where the professional washers will wash the car.