How to paste wallpaper - some practical tips

Many apartment owners, who decided to do cosmetic repairs, rarely wonder about how to glue the wallpaper properly. As a rule, most of them do not pay due attention to this process due to established, but obviously outdated stereotypes: wallpapering the walls does not cause any complications. However, this is far from true, especially against the background of the constantly appearing on the market new types of wallpaper, manufactured using the most advanced technologies. First of all, this vinyl wallpaper on paper and non-woven basis.

Gone are the days when the wallpaper could be glued, especially not puzzling with the preparation of walls and the quality of pasting. However, then, due to the huge deficit for all kinds of goods, the question was much more acute not about how to paste wallpaper, but where to buy them. Today, however, there are no problems with the purchase, but the preparation of the basis is not all that is troubled, which sometimes leads to very deplorable results.

Vinyl wallpaper, especially on non-woven base, is very whimsical and does not accept poor-quality walls. Therefore, before thinking about how interesting it is to paste wallpaper, it is necessary to carry out a number of measures for the preparation of walls, and only then to engage in design and directly pasting. So, the foundation must be dry, clean, even and, if possible, monophonic. To do this, remove completely old wallpaper and level the walls with putty, and then carefully dilute them. After complete drying of the walls, you can proceed directly to their pasting.

How to paste vinyl wallpaper so that they are well kept on the wall for many years, and there were no ugly seams? First of all, you need to buy quality glue from the manufacturer, which has proved itself in the market and has positive feedback from consumers. On glue, as, indeed, on the wallpaper itself, in no case should not be saved. Quality material - the key to successful repair, you should not forget about it.

When cutting rolls, you must carefully follow the direction of the drawing and, in order to avoid mistakes, do not aspire to cut all the tubes into strips the same hour. It is better to cut the wallpaper gradually, constantly checking the already pasted panels. All modern wallpaper is glued to the joint in the joint, there should be no overlaps. Otherwise, the wall will turn untidy, and it is unlikely to cause delight and admiration.

Start gluing from the window, and for the first strip it is desirable to draw a vertical line on the wall, which will serve as a guide and greatly facilitate the process of pasting. Vinyl wallpaper slightly differ from each other both in thickness and in structure, so the manufacturer applies an instruction on how to paste wallpaper of this type to each tube. All recommendations should be carefully observed, which will help to conduct the pasting at an acceptable level.

By and large, given today's rather high cost of finishing materials, anyone who is not too strong in questions about how to paste wallpaper properly, it would be wiser to turn to professionals for help.