Sports and FitnessFishing

How to make a knot self-tightening?

Nodes are the most unreliable part of the tackle. However, you can not do without them. In any gear, they are at least two. The first node allows you to tie the line to the spool, and the second one is designed to be attached to the hook line. Fishermen use self-tightening and sliding knots of various complexity. And for successful assembly of gear is better to know several different ways to tighten the line or braid.

широко применяется рыбаками. The self-tightening knot is widely used by fishermen. It is quite simple, but original. Such a knot is tightened under load. The more effort you make (within reasonable limits), the stronger the rig will become.

Features

имеет множество вариаций. The self-tightening knot for fishing line has many variations. Each fisherman chooses the optimal technology for creating a tooling. It is also used for tying the line to the spool, and when mounting the hook. Especially often self-tightening knots are used to assemble the mackerel.

The most popular site is used for bottom fishing for a large enough coil. This allows you to wind the required amount of fishing line for long casting.

можно начинать вязать с недорогих разновидностей нити, например бекинга. A self-tightening knot for a spool can be started to knit from inexpensive varieties of yarn, for example, beking. Continues the same tooling with a stronger braid or quality monolskoy. Every fisher can learn how to make a snap quickly and correctly.

How to Knit a Knot?

, необходимо рассмотреть эту технику поэтапно. To understand how to tie a self-tightening knot , you need to consider this technique in stages. To do this, you need to prepare a spool, as well as a suitable fishing line. The thread must be wrapped around the coil once. Its tip should be left of sufficient length. So it will be convenient to make further manipulations.

From the tip of the line, you need to make a loop, deployed in the opposite direction. This end must also be pre-wrapped with the leading thread.

Further, the free edge is passed through a loop that formed at the base. The knot is tightened. To do this, it must be wetted with any liquid. When a ring is formed, it must be put on the spool. In this case, the line is tightened. To do this, you need to pull for the main line. This simple method is used by many fishermen when winding the thread on the spool. He proved his reliability and effectiveness.

Shutdown

After the line is pulled, you need to remove the unnecessary ends. They cut off with scissors or a sharp knife. The node can later be weakened. This removes the line from the spool.

, рыбак должен учесть несколько важных моментов. After considering the technology of how to make a self-tightening knot , the fisherman must take into account several important points. To ensure that the tackle was reliable, it is necessary to follow simple rules of winding. Before the reel, when winding the fishing line, the fisherman should leave a few millimeters. This technique helps to prevent the thread from slipping off the spool. To throw the bait at the same time will be as far as possible.

When tightening the knot, remember that the weakest part will now be a patch above it. Here the line is slightly stretched, so its strength characteristics on this section of the line will be violated. So you need to be careful with the thread.

Why make a knot on a reel?

признан в кругу рыбаков классикой. The self-tightening knot is recognized in the circle of fishermen as classics. However, some fans of recreation on the reservoir prefer not to use knots at all to fasten the line to the spool. For this, they acquire coils equipped with a special stopper or clip.

For more simple gear you will have to master knitting technology. Some fishermen fasten the line to the spool by winding a large amount of monofilament. The line itself keeps itself on the reel. If a fisherman uses only 100 m of fishing line, he should wind onto the spool about 200 m.

Minus this approach is manifested in the fishing process. The line will wear out gradually. In the conditions of the reservoir it is necessary to get rid of some of its sites. Over time, there will come a time when the available amount of thread becomes insufficient to hold it on the reel. In this case, the fisherman still has to knit a self-tightening knot in order to be able to continue fishing.

Node for the sweeper

Very often, fishermen use a self-tightening knot for the swine. This tackle looks like a rectangular briquette from the cake (makuhi), sandwiched on the sinker. You can train in tightening such a node on the wire.

The line is looped around the arm to make a loop. Then the palm is turned away from itself, while the thread is turned too and tighten it by 1.5 turns. Through this loop you need to stretch the main line. It is better to wet it to make the process easier.

The resulting loop is designed for a briquette of makuhi. If you pull the free end of the line, the knot will loosen. So you can change the bait. Therefore, it is better to leave a free end about 2 cm long. So you can quickly and easily assemble the sweep in a reservoir.

Benefits

The self-tightening knot, although considered simple, provides the fisher with a lot of advantages. This is the most successful technology for tightening the thread on the coil. It is used in a pond. The fisherman will not need any additional devices for this. It is also not necessary to have some special professional skills to create such a node.

It's easy to adjust. The more the fisherman applies, the more tightly the yarn will tighten. The node will not be able to untie itself. The only thing that is required from a fisherman is to ensure a constant thread tension. This reduces the risk of slippage of the running ring.

If desired, the self-tightening knot can be loosened and disassembled. This makes it the best option when creating a mackerel. Such qualities explain the popularity of this knot among experienced and novice anglers. It is simple and reliable, so it is used universally.

даже начинающий рыболов сможет создать крепкую, надежную снасть. Considering the technology of how to create a self-tightening knot, even a novice angler can create a strong, reliable tackle. It does not fail in the process of fishing out of the water. Simplicity of execution allows without any additional devices to tie such a knot directly on the pond. The positive qualities inherent in this site make it popular and widely used by experienced as well as novice fishermen.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.