How to make a coolant in "Meincraft" with improvised means

Players who have already mastered and installed themselves several modifications, are trying to understand how to make a coolant in the "Meincraft". This substance is used in a recipe for a nuclear reactor, which is a complex mechanism. It is created for the sake of providing with electric energy huge areas of buildings. Without it, this process is impossible.

Use of refrigerant

Before you make a coolant in Meincraft, it's worth knowing that it's a liquid substance and filling a capsule. First you need to create with a tin plate and energy or several ingots of the same metal capsule. It is a cheap container where the substance is easily filled. As a result, crafting a thing called a cooling capsule. It has the properties of cooling mechanisms, without it a nuclear reactor will simply not be created. If you add four tin plates to the object, you get a cooling capsule 10k, which is equal to one bucket with a coolant.

The first part of the creation of matter

The process itself, how to make a coolant in the Meincraft, is long and requires a lot of attention from the player. Construction begins with an electric thermo-generator. To the side with the orange square is attached a steam generator with settings of 221 Bar and 1 MB / Tact. Thermal generator throws the maximum number of coils. Before the steam generator itself, place a capacitor. There one needs to download one improvement of the liquid ejector and four heat sink units. Further there are problems, after all the pump is necessary, and it is only in the modifications of IndustrialCraft 2 or Buildcraft. Place this device under the ground at the level of the thermo-generator. It should be put one improvement in the liquid ejector. It is worth noting that this is the process, how to make the coolant in the "Maincrafter" 1.7.10 version of the client. In others, some changes are possible. If you have made these points, then check the settings. In the first stages it is best not to admit flaws, otherwise it will be difficult to find a solution later. If the player has ascertained the accuracy of the scheme, then go to the last three stages of the creation of the mechanism.

Continuation of the mechanism

Next, the player will not be too worried about how to make the coolant in the "Meincraft". The hardest is to understand the internal settings correctly. To the finished machine, which was done before, we put fillers in the amount of two pieces on one side of the equipment. Now proceed to alternately configure each of them. The circuit of the first must have a cell of energy on one side and four simple opposite ones. In the center there is one cell to the thermo-generator, further 64 units of substance into the free cell and the steam generator. This is collectively accumulated in the result desired by the user. The configuration of the second filler gives an answer to the question of how to make a refrigerant capsule in a "Maincrafter". The scheme is the same, only the output goes to one separate cell. As a result, it remains only to take the capsule and turn it with the help of tin plates into a more powerful model. Now the player can easily cope with the construction of a nuclear reactor and more complex tasks.