How to install the xenon in the car's headlight?

Xenon headlights - this is one of the main inventions of mankind in the automotive sphere. Due to their special design, they provide the most effective illumination of the roadway in the dark. In general, the installation of xenon in the headlights requires certain knowledge and skills, so it is best to entrust this work to professionals. However, if you are confident in your abilities or, at least, are versed in this area, you can do all the work yourself. Today we will find out how to install a xenon on the VAZ-2110.

Dismantling of optics

To begin with, you need to remove the lights in which you plan to install the xenon. To do this, disconnect the battery from the power supply and find the nuts securing the headlamp unit to the machine. Near the head optics on the back side you will see bolts and two locks. After unscrewing the first one, it is necessary to press down the second part as much as possible downward. Further we take out a headlight from fastenings, preliminary having removed from it all wires. To do this, we need a small minus screwdriver. With it, disconnect the large terminal - insert the part into the wire and gently put the slot on the terminal on the edge of the handle. If you hear a short click, you know - this part disconnected from the mounts.

We disassemble the headlamp

When we figure out how to install the xenon, we need to remove the glass protection on the headlight unit. This is done very easily. On the back side of the design, two clips are pushed (as a rule, they consist of plastic, so it is not worth much pressure on them). Everything, the optics is disassembled. Now you need to think about where to install the ignition unit. The main thing - mount it so that then the whole design does not rest on the metal bumper bumpers. And parts for fastenings, as a rule, are sold together with xenon lamps, so you do not need to do anything yourself.

Now the wires. Inside the cover there are 4 data elements that are connected to the battery power supply. Remember that white wires are always positive, and brown wires are negative. And before installing the xenon, carefully study the polarity of all the elements. Sometimes manufacturers of alternative optics color the wires in completely different colors. For example, on xenon lenses, "plus" can be indicated in black, and "minus" in blue. In order not to confuse the values and not to connect to positive charge negative, carefully read the instructions that are attached to each new part. According to it, connect the wires to the necessary connections and fix the xenon lamp in place. The lid should be closed so that the connected elements are not squeezed together. The terminals are connected to the ignition unit. With the second headlight, the same actions should be performed. At this stage, the question of how to install a xenon on the VAZ-2110, can be considered resolved.

Helpful Tips

When installing the xenon, always check the operation of the headlight before it is fully installed on the machine. So if you find faults, you will take less time to reverse the entire construction. And one more thing - observe the correctness of the body mountings. If it does not fit into the mounting grooves, it means that you have overlooked something or forgot to do it with the installation.