How to draw a maple leaf yourself?

The process of creating a drawing is not always long and incredibly complex. There are a lot of basic rules, adhering to which, you can draw on paper almost anything, without much effort. How to draw a maple leaf? Step by step, of course. You have to fulfill only a few points. As a result, you will certainly get a charming drawing. You can do it with a simple pencil or in color.

How to draw a maple leaf: outline

Start with the primary lines. It is assumed that the drawing will be done in a pencil. In this case, you can at any time be able to fix something or to erase already unnecessary lines. The first outline consists of three slightly concave lines crossed at one point. The central part should be slightly longer than the lateral ones. Also leave more space below. There will presumably be a stalk.

How to draw a maple leaf in pencil: continue marking

To further draw was fast enough and did not take much time, put a few points near the existing lines. Do this as follows. Each point should be inside the three main lines of sharp corners that formed when crossing. They can be placed approximately Center. This will allow you to further accurately draw the edges of the sheet. Without such reference points, the end result can be uneven or sloppy.

How to draw a maple leaf: start painting details

Using a simple pencil, you need to chart the shank. Let it be somewhat thicker than the existing line. Drawing the edges begin with the bottom of the sheet. Lines should not be asymmetric. Nature does not always create perfect creations. But this is their peculiarity. The edges of the maple leaf can be slightly torn. Direct and clear lines here to anything. Otherwise, the result will be far from the actual image.

Do not know how to draw a maple leaf next? Mark the tops above the auxiliary lines. The tips should look like small sharp corners. After that, proceed to draw the side lines. They should also turn out to be asymmetric. Connect the sides with the top corners.

How to draw a maple leaf: the final stage

To make the drawing more natural, add streaks. They should turn out to be thinner than the contour of the sheet. For such a fine work, use a hard pencil (marking "T" or "2T"). He will not smear and spoil the paper.

The drawing is almost ready. Do not forget to inject extra volume with shading and light shadows. Remember that the convex parts should be lighter. Therefore, hatch only those places that are concave and dark. Use light pressure on the pencil lead. If it is solid, then otherwise you just tear the paper with the tip. A soft pencil will get dirty and crumble. And eraser can remove already successfully drawn lines and completely spoil the finished result.