How to disassemble HP laptop? How to disassemble the HP Pavilion G6 laptop?

In the process of using portable electronics, there is often a problem - dust accumulates inside the enclosure. Microscopic dirt particles pass through the ventilation channels of the laptop. The cooling system ceases to function fully, thereby exposing the internal components of the computer to overheating. As a rule, it is at such moments that the user has a question about how to disassemble the HP laptop. After all, often the time is not in our favor, and the workshop is not always around the corner. Attention and accuracy is all you need to return your "electronic friend" lost purity and ability to cool effectively.

Workplace and tools

Smooth surface and stable legs of the table - 25% of the success of the planned enterprise. A special cross-shaped and flat screwdriver is another 25%. The remaining 50% are already known to you, which is the main component of excellently executed work. And do not forget about folk wisdom "measure seven times ...".

How to disassemble HP notebook: step-by-step instruction

First of all, it is necessary to de-energize the electronic device and remove the battery from the laptop. Avoid any chance of damaging the integrity of the lacquer coating on the top of the casing (lid). As a lining, any dense non-slip fabric can be used. Make a schematic drawing of the back of your laptop. Subsequently, the removed screws should be located according to the places of their removal. This will greatly facilitate the correct assembly of the device after the completion of preventive actions. How to disassemble HP laptop, you will understand in just a few minutes.

Step # 1: Dismantling the hinged components

The back of the case has special compartments for quick access to RAM, various network modules and a computer hard drive. Protective covers can easily be removed by unscrewing the fixing screws. Sometimes, only a slight loosening of the tightening bolts is sufficient. The above components must be dismantled. Of course, observing all the same golden rules "accuracy and attention." The optical drive must also be removed. By the way, the reader is attached using only one screw, which is usually located in the middle end part of the device for recording and reading information.

Important information

The presented recommendations are also relevant in deciding how to disassemble the HP Pavilion G6 laptop. Since the principle of dismantling the case for most of the modifications of HP is generally identical and has no significant difference. The only exception is the removal of the keyboard unit, since the location of the fixing bolts and latches is strictly individual in many models. This "developer inconsistency" can cost you a broken case. However, everything is predictable, you just need to conduct a thorough examination of the laptop and study the matter more carefully.

Step # 2: Free the construction from fixing

The next step in the practical solution, how to disassemble the HP laptop, will be the "total" unscrewing of all the fastening screws that are located on the back of the device. Screwing bolts, do not forget to lay them on the layout of the original layout, since their length is regulated by the structural features of the case. After the operation "unscrew all the screws" is completed, make sure that they are all really dismantled. As often some of the bolts remain untouched. For this reason alone, the user applies excessive force and, as a rule, breaks or deforms the case parts of the laptop.

Step # 3: Unfasten the keyboard module

When dismantling such a delicate part, you should carefully remove the right upper corner of the keypad (using a flat screwdriver). Then, shifting to the left, with the help of movements, release the locks of the rest of the restraining elements. The decision on how to disassemble the HP Compaq Presario CQ57 notebook computer can be drastically different (from other series of an identical model) precisely at the immediate moment of removing the keyboard module. The secret to successfully removing a block of keys is simple:

• Make sure that the front bezel is not divided into two independent parts. In the case when the body element is monolithic, the above-mentioned method of removal should be applied. Otherwise, you must first remove the top deck of the panel, "undermining" the plastic before the sides.
• In newer HP models, an adhesive tape is used and metal latches located around the perimeter of the keyboard.
• At the time you release the keyboard, be extremely careful, as impulsive and careless movements can have dire consequences - a damaged loop (often torn), which is the link between the key module and the system board of the device.

Perhaps some want to know how to disassemble the HP G62 laptop? It's simple, apply the material of this article and remember: accuracy in the process of disassembly is above all!

Step # 4: Turn off the internal connectors and unscrew the remaining fixing bolts

Under the keypad module, which was dismantled by you, there are connecting loops. As a rule, there are 2-3 of them. Disconnect the devices from the motherboard.

• Two connecting plaits of the touchpad.
• USB power connector.

After you have made all the above-described actions, the top cover of the laptop can be removed. As you can see, the question of how to disassemble the HP Pavilion G6 is actually solved by ourselves. However, in order to thoroughly clean the inside of the device from dust pollution, it is necessary to remove the main part of the electronic machine ...

Step # 5: Dismantling the motherboard

• The fixing screws must be unscrewed.
• Disconnect all loops and connectors.

Now the motherboard can be freely extracted from the "bowels" of a dirty laptop. In the event that "something" does not start up, do not use physical force! Perhaps somewhere remained untwisted screw.

Step # 6: Direct cleaning process

Only now, you, the respected user, can freely enter all the places of the device in order to complete the preventive work. A practical solution, how to disassemble the HP Pavilion G6 laptop for cleaning, can be considered fully described. However, several recommendations will help you to remove dust accumulations with the help of efficiently used tools.

• Household vacuum cleaner - an indispensable assistant in a situation where you need a "delicate" and at the same time high-quality cleaning.
• Hard-to-reach places can be freed from dust with a conventional household brush.
• Do not shake or deform the housing that has been released from the parts.
• Do not use any liquid.
• Check the cleaned surface. Perhaps in the grooves or crevices there were bristles from the brush, pile from the wiping material or other foreign elements.

In conclusion, or a few words for the future

To ensure that the cooling system does not experience "stress", try not to use the laptop in dusty places. When reassembling, try to install everything correctly, and replace the dust catchers. The usual porous sponge is perfect for this. Now even the question of how to disassemble the Compaq laptop will seem trivial for you. Since the principle of disassembly is known to you, and its universality is now an undeniable fact for you. Be attentive and successfully gained experience to you!