How in Lenovo go to "BIOS" without any problems? Step-by-Step Guide for Laptops and Computers

This article describes a universal algorithm for how to go to "BIOS" in Lenovo. Most often this operation is performed during the reinstallation of the operating system or in case of problems. If everything is clear with stationary PCs, then you have to tinker with laptops, since there are several possible options and you need to find out which one is suitable for this particular device.

Documentation

Get the answer to the question "how to go to the" BIOS "Lenovo" can be in the documentation that comes with the device. For stationary PCs, this is the user's manual for the motherboard. In it, a whole section is devoted to this issue. In addition to the procedure for entering basic settings, each parameter, as well as its possible values, is described in detail here. In most cases, the Del key is used for this purpose. In the case of a laptop, the situation becomes more complicated. There may be different options. And one way to find out the one that is used in your case is to study the operation manual. It necessarily describes the procedure for entering the basic settings of such a device as a Lenovo laptop. Go to the "BIOS" can be using one of three options: F1 or F12.

the Internet

The paper version of the documentation is not always preserved. This is particularly true for those devices that have been in operation for more than three years. But there is nothing wrong with that. In such a situation, the official website of the manufacturer should come to the rescue. There necessarily are electronic versions of all operating manuals. But here it is necessary to note one important point. In the case of a stationary PC, you need to visit the site of the motherboard manufacturer. But in the case of a mobile PC, we turn to the Lenovo website for documentation. The instruction manual should be on this resource.

Screen

Another way to find out the key that is used to access the basic settings is to watch the process of loading the laptop carefully. To be more precise, the first window with the hardware parameters. If you display the logo of the device manufacturer, then you need to press Esc. You should pay attention to the line "Press b to setup". Instead of b, F1 or F12 must be indicated. This is the answer to how to go to "BIOS" in Lenovo. This method is universal and can be used not only on the products of this Chinese manufacturer, but also any other company.

Enter the BIOS

Well, now we will directly understand how to go to "BIOS" in Lenovo. It is important to understand that this can only be done during the testing of equipment during the power-up or reboot of the PC. In turn, the operating system can not access the basic settings of the personal computer. When the first window appears (this can be either a window with PC parameters or a manufacturer's logo), we clamp the key that was found out in the previous step. After the line "Press b to setup" (instead of b should be the key that is used to access the BIOS) will change to "Entering to Setup", release it. After the information is collected, the BIOS window will automatically open. Now you can make the necessary changes to the values. When you are finished, you must save them by pressing F10 and answering "Yes" in the next request.

Conclusion

Within the framework of this material, it was described how to go to "BIOS" in Lenovo. The simplest way is to do this on a stationary system unit. In this case, only one key is used - Del. But in the case of a laptop, everything is much more complicated. There are various options: F1 or F12. Which one is used on your mobile PC, you can easily and easily find out, following the directions that are set out in this article. Well, then it will not be very difficult to enter the system of basic settings of the computer of this manufacturer.