How do I heat the steering wheel with my own hands?

The tough competition of car manufacturers has led this industry to incredible progress. Many manufacturers are interested in attracting a potential buyer to their brand. It is especially difficult to come up with a brand new for luxury cars, everything should be just at the highest level.

Where is the heating of the steering wheel?

Often manufacturers do everything to maximize the comfort and appearance of the car. The heated steering wheel seemed to be something incredible, but this is no surprise. A similar option is present not only in premium cars, many manufacturers install a heated steering wheel, not only foreign cars, but domestic ones.

As for the rest, older cars, where there is no heated steering, then not everything is lost. It is only necessary to know a few simple rules and to make heating the steering wheel with your own hands. At VAZ, you can also install this pleasant option, then the car will acquire a second youth. When buying parts for heating is not recommended to save on them, because it depends on them and the reliability of the mechanism.

Required inventory and materials

It is not necessary to use this function for a whole year, because in the summer it is meaningless. But for the car to be comfortable at any time of the year, it is necessary to make heating the steering wheel with your own hands. Moreover, you do not need to buy expensive tools and parts, everything is sold at every corner, in the market, in the store, on the Internet.

To heat the steering wheel you need to purchase:

• A set for heating the seats, a relay for temperature control, it also serves as a fuse against excessive heating;
• A sharp knife and ordinary scissors;
• Insulating tape, adhesive tape on both sides;
• Paste-like sealant;
• It is better to buy immediately the steering wheel, leave the original in reserve, if your experiment is unsuccessful, you will have a native wheel.

Process of installation of heating

Many motorists simply do not know how to make heating the steering wheel themselves, for this you only need to approach with responsibility and seriousness of intentions. The whole process of warming does not take much time, but there are processes where you need to be as accurate and accurate as possible.

1. First, remove the steering wheel, do not in this thread now tell how to remove the steering wheel, because each car is unique, and no one will better tell how to do it than the operating manual.
2. Now let's start the drawing lesson. At this stage, using a marker, draw lines where the heating elements will be placed. Here everything depends on your imagination and the length of the materials, so that it will be enough for the whole wheel.
3. You need to take a sharp knife and make cuts on the previously drawn diagram on the steering wheel from the outside.
4. We make a winding, at this stage it is necessary to fix all the wires well and glue them where necessary. Bends wrapped with electrical tape.
5. Heating the helm with your own hands is almost complete at the first stage. It remains only to take care of the comfort of the driver and with the help of a sealant to cover all the irregularities of the steering wheel.

Also, you can trim the steering wheel with leather or any other material that fits the interior of your vehicle. To tighten the steering wheel skin, you need to use a cardboard pattern, which will consist of several parts. Then, on the cardboard, we cut out the pieces of leather we need, put them on the steering wheel and gently sew the cover from the inside of the steering wheel.

How to connect the system

To heat the steering wheel with your own hands, you need to connect it directly to the car. To do this, you need to do the following:

• The first step is to install the button, it must activate and deactivate the heating mode. You can buy the mechanism of inclusion in any specialized electrical appliances store. For your convenience, the button can be hidden under the steering wheel.
• Then determine where there will be a minus, and where plus. To do this, we use two copper plates, their thickness should be up to 1.5 millimeters.
• Using a soldering iron we attach copper plates and by means of the relay we connect wires to the accumulator. If there is no possibility to purchase plates, you can use rings, attach them to double-sided tape.
• To heat the steering wheel with your own hands was made qualitatively and there was no short circuit, you need to pour a sufficient amount of epoxy glue between the copper elements.
• Next, the motorist must make a hole in the steering wheel, near the copper element, so that you can place there, an additional contact.
• One contact - minus, the second - plus, the third one does not need to be connected to anything.
• All contacts must be insulated.

On this process is over, we establish the "steering wheel" in place. So you did the steering wheel heating with your own hands. "Kalina", GAZ, VAZ and any imported car models can undergo a thermal insulation procedure. Even now, not every car manufacturers install insulation, although this is not something unbelievable.

Warming the helm on a motorcycle

A motorcyclist who likes to ride in late autumn or winter does not need to explain why it is necessary to heat the helm on a motorcycle with his own hands. After all, the body can be protected from the cold by jackets, sweaters, down jackets, clothes will not greatly interfere with the control, in contrast to the mittens.

How the heating is arranged

The design of heating is very simple, the principle of its operation is similar to a conventional kitchen electric stove. Electricity passes through a wire that heats up, making the steering wheel warmer.

Spirals for heating are sold in hardware stores, the price for them is not high. Uncoiling this spiral, get up to 15 meters of wire, which will serve as a heating element.

Important! No need to take a helix with a power of more than 800 W, otherwise the steering wheel will not be warm, but hot, which is also not comfortable.

Heating installation

First we look, how much wire is needed for one handle, and then for the second one. The ends of the wires are soldered to the heating element and the spiral is wound on the handles. The heating element is connected to the battery.

On the handles over the winding, you need to wrap the tape, bicycle camera or something similar. It is possible to put the temperature control knob.

This design is quite good in terms of warming the driver, but there are several disadvantages. Heating pens consumes a lot of energy, it is recommended to put a night light bulb a little lower power. Also, many people are not satisfied with the appearance of pens wrapped in electrical tape or something else.

conclusions

From all of the above, you now know how to make heating the steering wheel with your own hands, so that it was really good and practical. This option is not considered expensive, and the installation procedure itself is very simple, you do not need to perfectly understand electrical appliances for heating installation.

Thermal insulation can be put on cars and motorcycles, the installation system is almost identical. Only in the case of a two-wheeled vehicle, there are some questions about the voltage created on the battery and the appropriateness of installing the heating of the steering wheel.

Whatever the downsides in the heating of the steering wheel, there is one plus that you can not disagree with - heat. After all, it is the driver who drives his vehicle, so he should not freeze when there is a minus temperature on the street.