Grinding machine with a grinding belt and a disk. Grinding-grinding machines Saim 320х190, 3Б641, Einhell DSC-201

Grinding machines are produced with a power of 3 kW. Some modifications are capable of processing only wood blanks. Also on the market are professional devices with large diameter discs. For the treatment of steel pipes they are excellent.

The greatest demand is for devices with a control unit. In order to learn more about grinding machines, it is necessary to consider the types of modifications.

Modifications with a 3 kW belt

In general, a grinding-grinding machine for 3 kW is equipped with an asynchronous motor. Many models are used to process wood blanks. As a rule, the frame is made on three supports. On average, the frequency of modifications does not exceed 3500 rpm.

Calipers are used with holders. It is also important to note that models can be produced with different control units. Some devices are made with CNC. Thus, the operator is able to remotely control the grinding process. To date, devices are manufactured with two and three locks. Ratchets are often made of toothed type. It costs an average of 3 kW in the area of 270 thousand rubles.

Devices for 5 kW

Grinding machine (desktop) for 5 kW is suitable for processing steel surfaces. Also in many workshops, devices are used to sharpen pipes. On average, the diameter of the disk is 25 cm. As a rule, the motor is of the collector type. The frequency of modifications of 5 kW does not exceed 4100 rpm. Many models have a lunette. It is also important to note that in the market there are machines with regulators and CNC. Protective shields are installed near the belt mechanism. Buy a quality machine for 5 kW can be 330 thousand rubles.

Machines for 10 kW

A grinding machine with a grinding belt and a 10 kW disc is used for machining large metal objects. Many modifications are made with two pins. In this case, the worm mechanism is made with a pin. Many models are used for processing bars. Typically, the frequency of the device fluctuates around 4500 rpm.

Some machines are able to boast the presence of CNC. If we consider a device manufactured in Germany, they are manufactured with a cooling system for motors. The average noise level is 85 dB. Disks on the devices may be installed with a diameter of up to 28 cm. However, in this case, it is necessary to take into account the design features of the modification. It is worth in our time, a quality machine for 10 kW in the area of 380 thousand rubles.

Compact Modifications

Compact machine is quite in demand nowadays. For a small workshop it fits perfectly. As a rule, the speed of revolutions in models can not be regulated. Motors are most often used asynchronous type, and they operate from the 220 V network. The models are made on two or four supports. Many machines are manufactured with a reliable protection system.

Flywheels are used to adjust the position of the disk. Also on the market are models with fixed racks. They are not expensive. However, in this case it is necessary to take into account the popularity of the trademark. Buy a good and compact machine user is able to price from 210 thousand rubles.

Professional devices

A professional machine is always made with CNC. Many modifications are sold with a cooling system. In this case, the limiting frequency of the pin is 4500 rpm. For processing steel blanks, the devices are excellent. The guides at the models are located above the shaft. By compactness, the devices are quite different. The average weight of the machine does not exceed 60 kg.

The models are manufactured with an anti-vibration system. Disks can be installed up to a diameter of 35 cm. However, in this case, it is important to consider the size of the lunette. Directly, the pinols can be made movable or fixed type. Recently, machines with two latches are very popular. Many models are manufactured with protective shields. It is worth a high-quality professional machine in the store about 480 thousand rubles.

Model with drive caliper

The machine with the drive caliper allows you to quickly gain momentum. Disks for models of this type are used with a diameter of up to 20 cm. It is also important to note that the average modification frequency is 3200 rpm. Some machines are made with lunettes. Roller devices are used to adjust the pin. Many models have protective covers. The noise level is low. There is a quality machine in the area of 280 thousand rubles.

Machines with belt calipers

For the processing of wooden workpieces, an abrasive grinding machine with a belt support perfectly suits. Many models are produced with a roller mechanism. It is also important to note that the frequency of the devices is about 3100 rpm. A disadvantage of machines is considered to be a high noise level.

Motors are most often installed collector or stepper type. The average diameter of the disc is 23 cm. As a rule, the worm mechanism is installed with stops. Many models are able to handle cast iron products. It is worth in our time a good machine with belt support about 230 thousand rubles.

Modifications with side retainers

The grinding machine with side retainers is quite in demand nowadays. First and foremost, it is important to note that this type of devices greatly simplifies processing of blanks of small size. The motors are usually of the step type.

On average, the discs are set to 20 cm. The size of the models is quite different. It is also important to note that CNC machines are on the market. They are quite expensive, but they are great for increasing processing efficiency. Tapes in devices are used with sandpaper of various densities. The average machine of this type is about 330 thousand rubles.

Models without ratchets

The grinding machine without the ratchet works by rotating the pin. In this case, the roller mechanism is installed behind the rest. Direct caliper can only be used drive type. On average, the power of the modification of this type does not exceed 3 kW. Flywheels are used to adjust the dial. The stands are made on two and four supports.

Devices with antivibration stops are rare. On average, the frequency of the models does not exceed 2300 rpm. To handle steel sheets, the devices are not suitable. Directly the tapes are used with sandpaper. Pinols for models fit the axial type. The average weight does not exceed 40 kg. Buy a quality machine without a ratchet can be for 330 thousand rubles.

Saim 320 model parameters for 190 mm

The machine (grinding-grinding) Saim 320 190 mm weighs as much as 45 kg. In this case, the disk is used in a diameter of 23 cm. The width of the machine is 32 cm. The frequency of the model is about 4,600 rpm. The device operates from a network with a voltage of 220 V at 60 Hz. The protective cover in the model is located above the slide. The stand in this case is made of steel. Maximum disc can be set to 29 cm.

The belt in the presented modification is used with a roller mechanism. In the standard set of the device there is an emery cloth. The power of the induction motor is 3.5 kW. If you believe the customers, then for sharpening wooden devices the model fits perfectly. It can also handle small steel products. Buy grinding machine-grinding Saim user can at a price of 320 thousand rubles.

Characteristics of the model 3B641

Grinding machine 3B641 is used for processing metal blanks, the weight of which does not exceed 50 kg. In this case, the motor is used at 4.6 kW. If you believe the consumers, then the model fits well for the processing of wooden products. The disc in this case is used for 19 cm.

The rack width of the device is 37 cm. The control unit is of the electronic type. The position of the pin can be adjusted. Directly the tape is used with an emery cloth. In total, the model has three lunettes. The height of this machine without a disk is 16.7 cm. Buy a model user is able to price from 300 thousand rubles.

Device Einhell DSC-201

The grinding machine DSC-201 is used in workshops for the processing of metal objects. The width of the workpiece can be a maximum of 5.5 cm. The motor at the machine is installed in an asynchronous type. The frequency of this modification is 4200 rpm.

In total, the model uses two lunettes. The support is fitted as standard with a roller mechanism. For grinding bars the model fits perfectly. The emery cloth in the device is set to a width of 3.6 cm. The stand itself is made with an anti-vibration system. Buy this grinding machine can be priced from 280 thousand rubles.