HobbyNeedlework

Fashionable sweaters with knitting needles: schemes, job description

Sweaters remain an actual subject of women's wardrobe for many years. Judging by the classical definition, the jacket should be called clothes for the upper body with a fastener from the neck to the bottom edge of the gear part. However, in everyday life the term is used to describe a variety of products from summer light tops to long warm cardigans.

In this article, fashionable sweaters (knitting with a description), as well as pattern patterns and pattern designs are offered.

Jacquard flirt

Let's start with the most complicated, but extremely interesting model. Fashionable women's jackets, decorated with colorful jacquard pattern, are very popular. They are carried with pleasure by both teenage girls and grown-up women.

It should be said that it is possible to undertake such a project only if there is a skill in working with a raglan sleeve. Here knitting begins from the neck and ends with the manufacture of elastic bands on the cuffs and along the bottom line.

However, unlike traditional raglan, when new loops appear due to nakidy or when tying broaches strictly at four points, the extension of this model occurs by the uniform addition of loops along the entire row. Thanks to the designer of the scheme, fashionable sweaters with a jacquard coquette can be knit, not caring about how the part extends. The pattern already includes the formation of new loops.

You should pay attention to the fact that they appear only from the broaches, because if you make a crochet, you get an opening. When twisting a broach, it is necessary to twist it beforehand, so the blade will remain as tight as possible.

How to work with schemes

The proposed drawing patterns allow you to tie fashionable sweaters to women of all sizes. It is enough only to carefully reproduce a suitable version of the picture. It is best to draw a contour of each part (completely, not half) on a separate sheet of thick paper. At the same time, it is necessary to observe all proportions, scale.

In the process of knitting it is desirable to apply the cloth as often as possible to the pattern in order to notice the error in time, if it will be. This applies to those details, which are flat cloths: sleeves, back and front. The coquette is already fully designed in three versions: for small, medium and large sizes. True, her scheme does not include a bar connected with garter stitch. Usually its width is from three to five centimeters.

It is important to remember that on the left side of the jacket there will be buttonholes. They are formed by tying one, two or three loops together with the subsequent selection of the same number of elements in the next row.

There is a sequence according to which such fashionable sweaters are made. Photos, patterns of patterns and contours of details can be different, but the order of knitting is usually the same:

  1. Making a coquette.
  2. Transfer of loops to a thick thread or to several sets of circular spokes.
  3. Alternate knitting of sleeves, back, shelves, transfer.
  4. Return to the neck: work with the collar.
  5. Sewing buttons, steaming, washing.

Knitting fashionable sweatshirts with harnesses

The next model will be liked by those who are fond of weaving plaits (they are also called braids, or arans). However, it is worth very carefully look at the scheme, because the effect of interlacing is achieved in a rather interesting way: instead of crossing the loops a combination of nacs, openwork holes and elements tied together is used.

The diagram below shows variations of ornaments tilted to the left for different sizes.

Next are patterns with a slope in the opposite direction.

It is important to understand in advance how these schemes will be used. The pattern on the shelves is inclined in different directions, and for the detail of the backrest, the center of the symmetry axis acts.

For beginners knitters, you can recommend a method that simplifies the work: perform all the rapports for only one of the schemes, so that all elements of the ornament are directed either to the right or to the left.

A few words about the collar

Such fashionable sweaters are made in accordance with the traditional sequence:

  1. Backrest manufacture.
  2. Knitting the shelves.
  3. Work on the sleeves.
  4. Stapling products, fastening buttons, heat treatment.

The strap for sewing on the buttons is done simultaneously with the knitting of the shelf, and the collar is tied down after it has been closed or reshaped to the auxiliary spokes of the shoulder loop. This design is extremely successful, because when the seam is sewn from behind (it will just be on the center of the back), you will get a collar-shawl.

Long cardigan jacket with pockets

To produce such a model, you should use a fairly thick yarn and spokes of the appropriate size. Thanks to this you can get a classic cardigan of large mating. Such fashionable sweaters do not lose relevance, as they can be worn almost everywhere. The beauty of the model is that here the sleeve is all-in-one with the basic details. This means that you do not need to bind armholes, pellet sleeves and then sew them. However, it is necessary to work with rather long rows on the back (the length of two sleeves plus the width of the part itself).

Below is a drawing with drawings of patterns.

They are designed for several sizes. Patterns of patterns do not make sense, because here we used only plaited and stocking knits . If desired, the details of the backrest and the transmission can be decorated with any other pattern or placed braids.

Collar-Schalke is connected by the same principle, as in the previous model, only has a slightly larger size. This is necessary, since the model is not fitted, but free.

How to tie a warm sweater

To get a really good product, you need to follow this sequence:

  1. To manufacture the backrest part.
  2. Bind the shelves.
  3. Sew the resulting canvases along the shoulders and sides.
  4. Tie and sew pockets.
  5. Place the buttons.
  6. Wash and steam the jacket.

It should also be remembered about the bars (along the shelves and on the sleeves). They are knitted with garter stitching simultaneously with the main canvases. Pockets and collar are made of garter stitch.

Knitting with knitting needles: fashionable sweaters with hoods

By and large, such sweaters should be called cardigans. Their biggest advantage is that they are incredibly comfortable. So much that even cause serious addiction. Often after acquaintance with such a product, girls for a long time forget about the existence of jackets, jackets and capes. However, this is relevant only for those who are not affected by corporate requirements and dress code.

The following materials are suitable for the manufacture of such practical products:

  • Alpaca.
  • Merino.
  • Sheep's wool.
  • Angora with wool or cotton.
  • Mohair. This yarn should be used neatly, as mohair is often used by grandmothers for their knitting projects, and the finished product may look old-fashioned.

Fashionable sweatshirt with hood is knitted as follows:

  1. Back.
  2. Two parts passed.
  3. Sleeves.
  4. Pockets (if any).
  5. All the details are sewn together.
  6. Knit the hood, tying the hinges along the line of the neck. You can also make the part separately and then sew it.
  7. The product is treated with steam.

Hood: types and methods of manufacture

In this model, the designer offers a simplified type of hood: it is a flat fabric sewn on one side. That is, if you fold it in half, you get a rectangle.

There are more complex variants, in which the hood is tied from two parts, constantly applying to the pattern or orienting according to the predetermined calculations. Such details have a smooth bevel, if you fold them in half, you can see a rectangle with one rounded corner. This method allows you to get a hood that looks better and more organic on the person.

However, most often no one puts on the hoods of knitted goods, so there is no need to complicate your task.

When knitting this part, you should pay attention to the location of the braids. They are so close to the edge that the resulting canvas does not require strapping.

Pattern distribution

The peculiarity of this model of a sweater is that the braids are included in the pattern started from the bottom. That is, the columns, formed by the alternation of the front and back loops, smoothly pass into braids and their weave.

Each shelf is knitted with a facial smoothness, and its decorative part is performed according to the following scheme.

The braids, located so close to the edge, replace the bar and prevent the web from twisting. By the way, the usual bar is not needed here, because instead of buttons, fasteners play the role of fasteners. Spin is decorated with an intricate composition of several braids. Its scheme is proposed below.

Fashionable sweaters, related to the above descriptions, can be supplemented by the own ideas of the master. These patterns can be successfully replaced by other similar but more familiar knitters. Variations with the length of the products are possible: it is quite possible to tie cardigans from short blouses, and long cloaks easily turn into blouses.

It is also not necessary to follow the fastener instructions. For example, if the craftsman knows that she will be more comfortable in the button-top jacket, and the scheme assumes only ties, she can independently calculate the shelves with the slats.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.