Today we will talk about how to make a fountain in the "Maynkraft". Often there is a desire to beautifully decorate a certain area or adjacent territory. A fountain can help in this. How to build it, we now figure it out.
Beginning of work
First of all, let's look at the simplest solution of how to make a fountain in the "Maincrafter". For its implementation, special knowledge is not needed. So, we choose a suitable place for construction. In the center of the site we excavate a pit, the depth of which will be equal to three blocks. Length and width - 7 blocks. In the center we create a small elevation. In height, it must reach one block. For this purpose, dirt can be used. However, in this case, 4 blocks of the element are required. Let's move on to installing the activator. We go to each of the corners of the future fountain and put the mechanisms there, after we connect it with red dust. It is also necessary to set the delay time - about 200 milliseconds. Thus, we managed to build a whole mechanism. It works continuously, and also includes lamps at the set time.
Auxiliary structures
The next step is to create the islands. We choose the center of the future "work of art", after which we set the blocks, based on the requirements of the character. This will be in the future the height of the fountain. We proceed to the next stage of the work. If we need to create really beautiful fountains in the Maincrafter, we should prepare the bottom accordingly. We spread it with plates. You can achieve even more visual effect. To do this, we have the plates one level higher than the activators. Also put the top of the lamp, which will periodically light up. After that, we work on blocks located at the edges, ensuring that the water can not go beyond them. We are doing this work with special care. Finally, from the bucket we pour water into the center of our fountain. Now everything is ready. The design works.
Results
We can enjoy the beauty obtained by doing only a few successive steps and using the minimal set of components. Decorate in this way the available site with the house is very simple. We can show even more imagination by adding different sources and changing the sizes. It is even possible to create "singing fountains". In real life, their prototype is in New York. To create a similar construction, we find a trolley and apply a certain command in the console, which is responsible for the smooth movement of water. Now we know how to make a fountain in "Maynkraft" and what is needed for this.