Composition "Cinol". Specifications. Using

"Cynol" is an anticorrosive composition containing zinc up to 95%. From the point of view of chemistry, it is a solution of a high-molecular synthetic polymer, in which a highly dispersed zinc powder is added.

Used to protect the metal from the influence of atmospheric factors. It perfectly withstands the impact of water (including marine), as well as aqueous salt solutions (with a pH of 6 to 9), but is destroyed by gasoline and other organic solvents.

It is a smooth matte layer, which has a light gray color, applied to the surface of the metal.

Application area

Used for cold galvanizing under different climatic conditions (regardless of location). It is used in three main cases:

- as an independent coating;

- to restore metal coatings from zinc;

- in the complex of the protective system as a primer for cover materials.

The quality of the welds does not deteriorate after the application of a layer of "Cinol" composition, the technical characteristics of which, on the contrary, improve the reliability of the performed work. This is one of its features.

Use the composition "Cinol" can not only private individuals (to cover sheds, fences and other products). It is perfectly suited for use in factories for the production of metal structures, shipbuilding, bridge construction, as well as artistic forging. If enterprises know all the details of working with this composition, then the ordinary buyer does not always possess the necessary information. Often it is necessary to tell various details about such a tool as "Cinol": technical characteristics, application on the surface, the field of application. This information can be found from the article, as well as from a consultant in the store.

"Cynol". Specifications

The layer of "Tsinola" applied on the metal surface has a light gray color, not glossy. To give shine, use a combination of paints "Cinol" - "Alpol", the technical characteristics of which allow them to combine.

The estimated material consumption for coating one layer is 200-320 g / m ² .

Drying at 20 degrees takes place in half an hour (up to the third degree). Complete drying - per day. A protective film is formed within two days.

The thickness of one layer after drying is 40-50 microns.

In a dry atmosphere, the temperature of the product is 120 degrees Celsius.

Surface preparation and application

For better coverage and protection after the application of a layer of "Cinol", the technical characteristics of the surface to be treated must correspond. To do this, it is cleaned of dust and dirt, then degreased. It is recommended that abrasive blast cleaning is carried out as far as possible. Then the primer "Cinol" is applied. Technical characteristics of the device allow using it under the following conditions:

- temperature from minus 15 to plus 40 degrees;

- relative humidity up to 90%;

- factory or living conditions.

In some cases, there is a need to apply the composition in several layers. In this case, between the layers, you need to wait for the previous one to dry out. The interval depends on the temperature factor and the thickness of the layer. Therefore, it is determined by "tie": if there is no trace when touching the stickiness, then it has dried up.

Other covering materials are applied not earlier than in 24 hours. An exception is the case when "Alpol" is used - special paint. "Cinol", the technical characteristics of which are suitable for this paint, should dry for only two hours.

A special approach should be to products that are intended to be used in liquid media. They are dried at least 7 days after painting, and only then they can be placed in an aggressive environment.

In all cases, drying should take place in natural conditions, without the use of fans and air blowers.

The composition "Cinol" is applied in various ways:

- by spraying (air and airless);

- with a brush;

- a roller.

Quality certificates

The high quality of the means is confirmed by a number of certificates and the results of tests carried out in various fields, such as construction (civil, transport, industrial), energy.

The safety of the product is confirmed by a sanitary-epidemiological conclusion.

There is a certificate of state registration.

Storage conditions

Keep the composition in tightly closed containers away from sources of light and heat. Shelf life, subject to all recommendations, not more than one year. If the "Cinol" agent is stored incorrectly, the technical characteristics deteriorate sharply.

Storage is allowed in the temperature range from minus 40 to plus 40 degrees. The product is transported under the same conditions.

If "Cynol" is stored at negative temperatures for a long time, it must be kept warm for at least 24 hours before use.