Briquettes fuel. Reviews of fuel briquettes from husk and sunflower husk, from reeds. Fuel briquettes RUF (RUF), Pini-Kay, Nestro: reviews of those who drowned them

For many years now fuel briquettes, about which you can read below, act as the most economical and popular fuel that is used in a number of countries around the world. The products are made using exclusively natural materials, including sawdust, sunflower husks, rice, buckwheat, as well as oat husks, etc. Such briquettes do not contain harmful substances, as well as all possible adhesive compositions. In the production process, they are pressed under high pressure and under the influence of a considerable temperature.

Fuel briquettes, which are recommended to be read before purchase, may have the shape of a cylinder, which makes it easier to use. They have a wide range of applications, and can also be used for all types of boilers, furnaces and heating equipment. They are excellent in grills, fireplaces and stoves. Consumers choose such briquettes also because they can provide a constant temperature during the combustion process for 4 hours.

Briquettes fuel, reviews about which are often only only positive, have minimal influence on the external environment at the time of combustion, in particular this is manifested when compared with conventional solid fuel at the same calorific value. The described material has a smaller ash content of 15 times, which is only 1% of the total mass. The technology of production is based on the process of pressing pre-shredded waste, and lignin, which is contained in plant cells, acts as a binding element.

Feedback on the duration of burning

If you decide to purchase fuel briquettes, it is recommended to read reviews about them before the moment of going to the store. It is important to take into account that these products, as consumers note, are characterized by a significant duration of combustion, which is especially evident when compared with traditional firewood. Thus, a bookmark in the heating equipment can be produced less often in 3 times. Combustion occurs with a minimal amount of smoke, the material does not spark and does not fire. It is noted that a constant temperature is maintained throughout the entire burning period. After combustion, coal is formed, which is also true for conventional firewood. In the future, the product of combustion can be used for grilling or cooking shish kebabs.

Reviews about calorific value

Customers choose fuel briquettes from sunflower husks, which you can read about in the article, for the reason that their calorific value is much higher compared to conventional firewood. Practice shows that the mentioned parameter is equal to that which is possessed by coal. Lovers of shish kebab and owners of the grill emphasize that when fat gets on the coal formed after the combustion of the briquettes there is no ignition, the material continues to burn or smolder in low even flame. It is impossible not to note the constancy of temperature. Heat output is 4400 kcal.

Feedback on the environment

Fuel briquettes from sunflower husks, which you should be interested in before purchasing, are environmentally friendly. It is this characteristic, as the buyers say, largely determines the choice in the direction of the described fuel. During the production, all kinds of additives are not used, and no harmful substances are released into the environment, this is especially true when comparing with solid fuel at the same calorific value as coal. In the end, coal can even be used as a mineral fertilizer.

Reviews of briquettes from sunflower husks

Fuel briquettes from the sunflower husks, reviews about which will help you decide the choice, have a lot of pluses. According to the European classification, such briquettes can be classified as fuel that does not form smoke. This attracts the owners of fireplaces and heating equipment, which is installed inside the house. Consumers choose these products because they are very compact, which is important not only for private, but also for a small country house. Among other things, oversize fuel is very convenient to transport, it is easy to load and unload, and for transportation services you do not have to pay too much. Fuel briquettes, which you will be aware of after reading the article, are suitable for cooking any food in barbecues, barbecues and grills. Due to the fact that no carbon monoxide is released in the process, it is possible to cook food inside closed premises, not only for an apartment building, but also for a veranda, a restaurant or a cafe.

Reviews of reed briquettes

If you are interested in fuel briquettes from reeds - who drowned, reviews and other information - all this you can read below. Buyers claim that 1 kilogram of material will be enough for 7 hours of continuous burning. At the same time, the heat transfer will be 6550 kcal / kg. Owners of boiler equipment say that the device will have to be cleaned only once every two years. The resulting ash, like coal, can be used as an environmentally friendly fertilizer.

You can ensure autonomy by using such fuel, as the equipment will not depend on companies supplying electricity and gas. There is also no dependence on external conditions on the type of damage to pipelines, power lines, theft, etc. Consumers do not face the need for long-term reconciliation, which takes place before connecting electrical or gas equipment.

Fuel briquettes from reeds, feedback about which correspond with positive characteristics, have a high density. In the production process, a technology is used that involves screw pressing. As a result, it is possible to achieve a density in the range from 1.1 to 1.2 t / m ³ . The surface consists of a sufficiently strong crust, which excludes damage and breakage of the briquette during transportation and storage. Transportation can be carried out by placing products in two tiers, since the material almost does not form crumbs. The existing crust is able to reduce the penetration of moisture inside, which makes the use of briquettes more comfortable.

Reviews of briquettes "Pini-Kay"

Fuel briquettes Pini-Kay, reviews about which in most cases are only positive, differ in that they do not stain the surface that comes into contact with them during transportation and storage. It is possible to single out a high density, which is equivalent to 1200 kg / cubic meter.

Ash content can reach 3%, which is one of the least indicators. If in addition to talk about the density, then it is 2.5 times higher than this parameter characteristic of wood. The bulk density of the material is 1000 kg / cubic meter. These figures are of interest to consumers quite often, buyers compare this figure with the bulk density, which is 300 kg / m3. This indicator, according to the owners of heating equipment, makes it easy to transport material to impressive distances. Due to the ideal shape, as well as small dimensions, it is possible to densely lay briquettes on pallets, pouring if necessary through special sleeves. This makes it possible to completely automate the loading and unloading process, as well as further combustion of this type of fuel.

Fuel briquettes "Pini-Kay", reviews about which you will become aware after reading the article, should be stored separately from other substances and materials. If the conditions are met, products can be stored indefinitely for as long as they are used. The temperature in the covered warehouse should be equal to the limit from +5 to +40 degrees. At the same time, the relative humidity can vary from 30 to 80%. It is necessary to exclude the interaction of products with water and aggressive substances. Consumers say that to prolong the shelf life, it is necessary to exclude the influence of ultraviolet radiation on them.

Feedback on RUF briquettes

Fuel briquettes RUF, reviews that match the characteristics of the material, easily decompose. Owners of fireplaces, boilers, and stoves note that using a different type of fuel has to turn into a stoker, ensuring the fuel is poured every hour. In order to ensure decay, it is necessary to reduce the draft by closing the ash-pit. Melt equipment, you need to guarantee a slight draft, then a cold stopper will be formed in the chimney, and the briquette will not smoke.

In this case, it is possible to melt the device without first heating the air duct. Using fuel briquettes RUF, reviews about which it will be useful to read before the time of shopping, you can warm up the premises in a shorter period than when using traditional firewood.

Features of the use of briquettes "RUF"

Fuel briquettes "RUF", reviews about which it will be useful to read to any owner of heating equipment that requires ignition, differ in certain characteristics. For example, knowing that the heat output is 4500 kcal / kg, you can heat the house, whose area is 45 square meters, for one hour with a single briquette. The weight of the latter should be one kilogram. Thus, to obtain 10,000 kcal, it will be necessary to use 5 tons of firewood, of which almost half will be water. To obtain an equivalent amount of heat, you need to use briquettes in a volume that varies from 1.5 to 2.2 tons. In view of all the above characteristics, it can be noted that for storage and transportation of briquettes, an area of 2 times smaller will be needed, compared to the one required for the same purposes with the use of conventional firewood. This indicates that the consumer of briquettes derives great benefits, and receives a more impressive efficiency than when buying and shipping conventional firewood.

If we compare with coal, then in order to obtain heat of 10,000 kcal, it will be necessary to use the mentioned fuel in a volume of 2.2 tons.

Additional features of RUF briquettes

In form, these products resemble bricks, in the manufacture of which, the minimum requirements are imposed on the qualification of the personnel and the organization of production, which has a favorable effect on the cost of the product. Among the minuses, one can single out the least resistance among all other briquettes to moisture and external mechanical influences. Therefore, for this brand of fuel, high-quality packaging is needed, if damaged, long-distance transport and storage becomes impossible. This is especially true of CIS roads, the level of which does not correspond to the European one.

Reviews about briquettes "Nestro"

Fuel briquettes Nestro, which you will be aware of, if you read the information below, has a wide range of uses. They are used for the operation of industrial equipment, as well as for railway transport. The bars can have an 8-faceted shape with an opening that is located inside. The length of the product is 250 millimeters, while the cross section is square, and has a side within 65 millimeters. The diameter of the circle is equivalent to 70 millimeters, and the hole has a diameter of 20 mm. The moisture content of the product on delivery should not exceed 9%, while the maximum value varies within 7%. Ash content is minimal and is 0.5%.

Consumers like the presence of a technological hole inside the products, which contribute to more intense combustion, without requiring forced ventilation. This makes it possible to use fuel in equipment that is characterized by low thrust. The products are manufactured using the technology of shock-mechanical pressing of husks and sawdust. As the main difference of such briquettes is the lack of processing under the influence of temperature during pressing. If there is a need to use briquettes of a certain shape, then these requirements can be taken into account by the manufacturer.

Manufacture is carried out by means of connecting rod mechanical or hydraulic presses. Fuel quite often has a cylindrical shape, and among the negative and positive characteristics can be identified the same features that are characteristic of RUF materials. The cost of such products is relatively low due to the fact that the production process is inexpensive. Consumers note that in terms of technical features, these briquettes are inferior in many respects to Pini & Kay fuel.

Conclusion

In general, fuel briquettes, regardless of brand, are resistant to moisture and mechanical damage. Some of them have less outstanding characteristics, while others, due to high requirements for the production process, are more qualitative. Features of the material can be determined by the consumer using the cost comparison method. Only in this way, or by requesting a quality certificate for products, you will be able to understand which briquette is better and which goods should be looked at.