"Algithin" for the pool: composition, instructions for use and feedback

In the water of any pool, in time, there are always different microorganisms, but simultaneously with them proliferating algae also multiply. They have a blue-green color and are cyanobacteria. Algae in most cases have excellent resistance to chlorine, since this substance can not penetrate the dense shell formed, which is obtained because of their large accumulation. It was to fight large colonies of cyanobacteria that the "Algitin" preparation for the pool was created. It is available as a liquid concentrate. Chlorine remains still the best substance that is destined to fight algae, although the necessary concentration of it is much higher than if it were required for the destruction of microorganisms. At the same time, the right amount remains at a level that does not harm people who bathe.

Effect of liquid concentrate

The substance "Algitin" for the pool is not intended for the destruction of algae. It prevents their growth. In addition, this effect lasts a large amount of time. As a result, the water in the pool is clarified. This effect is achieved due to the destruction of the protective film of cyanobacteria, so the disinfectant effectively performs its work. It is recommended to use the preparation "Algithin" for the pool before the artificial pond strongly overgrows. But if this did happen, then liquid concentrate is an additional component, which allows a large concentration of chlorine to fulfill its purpose. To maintain a constant level of matter in the pool is very easy, since it does not collapse from the effects of sunlight.

Composition, impact on the person and the price of the product

The substance "Algitin" for the pool is made on the basis of ammonium, or rather, from its quaternary compounds. They comprise 10% of the funds. The liquid concentrate is an algicide and pH neutral. At the same time, it contains absolutely no chlorine, and also does not include heavy metals. This, in turn, allows eliminating side effects for the human body, but simultaneously with such indicators, its cost increases compared to other similar drugs.

Auxiliary means for mixing with a pool liquid

With the help of a special measuring pad it is recommended to add the preparation "Algitin" to water. Instruction for the use of the tool advises to use also for these purposes an automatic device that allows you to add the substance in controlled doses. Direct mixing of the algaecide with water takes place in the swimming pool itself. But it should be remembered that such operations should be carried out at the time when the circulation pump of an artificial reservoir occurs. In addition, the process is carried out precisely near the place where the liquid medium is fed into the pool.

The drug "Algitin". Instructions for use

One of the tips for pool owners of any type is that the liquid algicide concentrate is recommended to be dissolved in water before adding to the swimming facility, and a separate container should be used. During this action, the initial concentration of the drug should be reduced by approximately 3-5 times. As a result of the performed processes, a solution is obtained, it must be connected to the pool water near the trisky (nozzles). Such places are mainly lattices, through which fluid is supplied from the circulation pump. Also, you can perform these actions in several places at the same time, but you should avoid direct contact with the filter if possible.

Recommendations for the dosage of algaecide

Today, there are several ways of treating the pool, which directly depend on the concentration of cyanobacteria in it:

1. Processing in normal mode. During this process, the preparation "Algitin" non-foaming is recommended to add in an amount of 50 ml to the artificial pond, which belongs to the open type, and for the indoor pool the dosage is 30 ml. In this case, the amount of the agent is indicated for every 10 cubic meters of liquid. The procedure must be performed once a week.
2. Impact processing. During the operation, 150 ml of algaecide is added for every 10 cubic meters of water. The process is performed as needed.
3. If a large number of cyanobacteria accumulated in the basin, that is, it is strongly overgrown with algae, it is recommended in this situation to initially treat the liquid medium with ten tablets of "Chloritex" for every 10 cubic meters of water. Then, after about 10-12 hours, following the same ratio, add 250 ml of the algaecide. After performing this type of treatment, a technical break is required , during which the artificial reservoir will not function for 12 hours.

Terms of Use

When the agent for the Algitin pool is used, basic safety measures must be observed without fail:

1. Children should not have access to the drug.
2. All people are required to avoid contact with the eyes, as well as the skin of liquid concentrate.
3. Means can not be ingested.
4. Algaecide should not have contact with other chemicals.

Opinions of customers about the drug "Algitin". Reviews about it

According to consumers, it is easy enough to use the product. They recommend to perform an operation before applying it, which allows a backwashing of the filter. Then it is necessary to turn on the circulation pump, then add the required volume of the chemical to the pond directly near the zone where the liquid medium is supplied. After this, the pool is preserved for 12 hours. In such a situation, being a substance without color and odor, like water, the "Algithinn" preparation for the pool reviews is only good from all the people who happened to use it. This method of application of the drug is almost completely consistent with the process described in the instructions, so the effectiveness of the method can not be doubted. In addition, almost all owners of artificial reservoirs use the "Algitin" remedy for the pool to clean the tiled edges and rubber mats. Reviews in a large number of such effectiveness of the application of the means confirm. To achieve the best antifungal effect, it is necessary to prepare a working solution, which will consist of 500 ml of water and 100 ml of the preparation.