Air conditioners Bork Y700: reviews, instruction

To create a comfortable microclimate, air conditioners and split systems are installed in almost all apartments, houses and office premises today. They allow you to cope with high temperatures in the summer, providing comfort to the person. As an example of such equipment are air conditioners Bork Y700, reviews about which you can read in the article.

It is not superfluous to get acquainted with the instruction, it will help to avoid mistakes during operation. For example, when there is a need to clean the filters and prepare the air conditioner for the winter season, because it is not recommended to use it at low temperatures. But repair is better to entrust to specialists, especially since it is not so expensive, and the guarantee for equipment will be preserved.

Reviews about the main features

The above-described split-system will cost the consumer 69 000 rubles. This wall-mounted air conditioner, according to the buyers, is suitable for small rooms. With the help of equipment it will be possible to create an ideal microclimate for work and life in the office and at home.

The air circulation is characterized by an indicator equal to 9.1 m ³ / min. Consumers like that the unit is able not only to cool, but also to heat the air, doing this instantly. When working, the device is quiet, and the presence of a special technology for producing negative and positive ions makes it possible to purify air from allergens and pollen, distributing air currents and reducing the likelihood of drafts.

Feedback on the main positive features

Conditioners Bork Y700, reviews about which it would be useful to read before purchasing the goods, have an inverter with which you can achieve a certain temperature in a short time. Customers choose this device also for the reason that its operation is characterized by a reduced level of energy consumption. When you turn off the compressor, you should not hear any noise.

Additional advantages

The air conditioner has an automatic control system, it works on the basis of the Coanda effect and is necessary to adjust the direction of air flow, which will depend on the work for heating or cooling. Buyers especially emphasize that such equipment can reduce the risk of allergic diseases. The air conditioner is able to dry and clean the inside of the device.

Reviews about technical characteristics

Conditioners Bork Y700, reviews about which are often the most positive, provides cooling with the characteristics of 9000 BTU / h, while heating differs by the following parameters: 10440 BTU / h. Consumers like an economical and powerful invector. The power consumption for cooling will be 0.77 W, while for heating it will be 0.78 W. According to the energy efficiency class, the split system corresponds to the designation A.

Additional functions that the consumer enjoys are:

• remote control;
• On and off timer;
• Plasma cleaning system.

The device can operate in one of four modes. The outer unit weighs 29 kg, while the inner block weighs 8.5 kg. It is important to take into account also the dimensions, which, according to customers, are rather compact. The indoor unit has the following parameters: 86h29h20 mm, as for the external unit, it has the following dimensions: 73х54х25 mm. The outer unit is made of metal, as for the indoor unit, then it is based on plastic.

The noise level of the indoor unit, according to customers, is quite acceptable for life and work, these parameters can vary from 23 to 37 dB. Use the equipment can be at an ambient temperature of -7 to +46 ° C. Conditioners Bork Y700, reviews about which you must read before buying the product, can create a temperature inside the room at a range of 18 to 32 ° C.

User's manual

Air conditioning Bork Y700 should be operated in accordance with the rules prescribed by the manufacturer. Of these, you can find out that cleaning the air filters must be done periodically. To conduct such work, it is necessary to turn off the device, raise the removable panel, and then remove the filters. From their surface dust is removed with a vacuum cleaner.

Elements are washed with warm water, in which some detergent can be added. The filter should be dried, but not exposed to direct sunlight. Only after the filter is installed into place.

Air conditioning Bork Y700, reviews about which you could read above, should be prepared by the end of the season. To do this, activate the automatic cleaning mode, so that the device is well dried from the inside. The appliance switches off and the power must be turned off. It is important to clean the filter and reinstall it.

Air conditioner Bork Y700, the instruction manual of which you must be read, is prepared also for the beginning of the season. To do this, it is important to make sure that the filters are not contaminated. The outlets and the air inlet of the external unit must not be blocked by foreign objects.

Troubleshooting tips

If you notice that the air conditioner does not work, it often means that you could use the start button immediately after turning it off. In this case, the equipment should be left for 3 minutes at rest, in order to repeat the switch-on. The instrument will not work even if you have changed the operating mode. It is necessary to wait for the same time, and after switching. If all of the above recommendations do not fit you, you need to check the power connection and inspect the fuse for damage.

If you notice that the air conditioner does not supply warm air, it may happen that the appliance heats up or becomes defrosted. The condensate can be formed in the drying or cooling mode. This is due to the difference in room temperature and the temperature of the exhaust air. Split-system Bork Y700, reviews about which it will be useful to read to any consumer who wants to acquire such a technique, can continue to work for some time after the shutdown. This applies to the external unit where the fan is installed. It allows you to cool the system.

Instead of confinement: the cost of air conditioner repair services

Air conditioning Bork Y700, dismantling (manual describes how to do this), which you can be carried out yourself, sometimes requires repair. To replace the compressor, for example it is possible, having paid to experts 5500 rbl. This cost includes the dismantling of equipment. In this case, we are talking about the power of the compressor, which is 3.5 kW. If this parameter is increased to 7 kW, the replacement of the node will cost 7500 rubles, which includes also the dismantling of the unit.