A bike computer how to set up? Cyclotech i6 cycling computer: installation

For today on sale it is possible to see some types of velokomputerov. Usually they are classified by type of connection.

Classification of cycling computers

There are 2 groups:

• A wired computer that is quite cheap and simple. However, it works, as well as devices of a different type. The problem with them can arise only one - an installation that is fairly simple to solve.
• The second type is wireless. These bike computers are quite simple to install. It can be put anywhere, right up to the application on the phone. Of course, this type also has cons. On the sensor that is attached to the wheel, you need to install a separate power supply. Also, such models are quite expensive.

This is the main difference between bike computers, but the manufacturers still divided them according to the functional. In new and expensive models you can find many additional features. This can be a training mode, GPS, distance learning and others. The best models have quite a wide functionality, as well as an excellent appearance. Quite good and budget model - Cyclotech i6. Consider the setting for the example of this computer.

Installation of a cycling computer

Fixing platform

First you will need to install the mounting pad. What it is? Computers are now made removable, that is, there must be some kind of mount to keep it on the bike. The mounting platform is a panel to which the necessary wires and fasteners are connected. Installation of the Cyclotech i6 is possible in several places.

• Removal of the steering wheel is quite a convenient place. A velocomputer of any size can be mounted on the steering bracket. This is a pretty comfortable place to orient when driving. Unfortunately, the computer will be susceptible to breakage due to a transfer or a fall. Also on this place is very often installed a navigator or smartphone.
• The center of the steering wheel - the best solution, if you have mounted on your bicycle and other devices. In this place it is more difficult to hook the bike computer and break it. Also you can slightly take your eyes off the road to look at the screen of your device.
• The last place that people often use is on the edge of the flu. Of course, it can be easily hooked, but at the same time you can quickly access the management of this device. It is located next to the hand, which allows you to comfortably change the parameters while driving.

The cyclic computer Cyclotech i6 must be installed qualitatively. You should make sure that all the bolts that are used to mount the fasteners are well screwed. This will determine the comfort of driving and the integrity of the device.

Mounting the sensor and magnet

The next stage of installation of the Cyclotech i6 cycle computer is the installation of a magnet and a sensor. The quality of the settings of these components will determine the correctness of the readings. From the hub of the front wheel, it is necessary to retreat 10 centimeters, with the centrifugal force not acting on the magnet. A sensor and a magnet can be installed on either side, it will not matter much.

To install the sensor, you need to take a few flagella, with which you attach this element. Then you need to install it on the plug. The sensor must be mounted perpendicular to the wheel. The magnet and sensor of the Cyclotech i6 cycle computer must be perfectly perpendicular. Unfortunately, because of the spokes, this will be quite difficult to achieve. Try to get closer to the standard in order to get accurate information.

As you already noticed, it is necessary to fix the magnet on one of the spokes of the front wheel. We install it perpendicular to the sensor. After installation, it is necessary to check whether 2 elements collide. Remember that you need to install high-quality so that during the movement the magnet does not fly off the wheel.

Sometimes install the necessary elements on the rear wheel. If it is more convenient for you, then you can try. Of course, you need to calculate the length of the wires for this. Installing the magnet and sensor in this case is a little easier, but you will need to fix the wires on the frame.

The wire

After installing all the elements necessary for work, you need to take care of the wires. They need to be carefully placed, so as not to damage the appearance of the bicycle, and also so that they do not interfere with other mechanisms or interfere with repairs.

First it is necessary to determine the length. Pull the wire up to the sensor and add a little in length, since you can not exclude the error. Further it is necessary to cut off an excess part. After this, you can stretch the wire. To do this, you can use several methods, select which one will be more convenient.

1. Laying of contacts on the steering column. In this case, you need to use flagella to fix the wire to the frame. This is a very simple method, but many people do not like it, since the appearance plays a significant role. But this is not the only drawback, you can quickly ruin contacts due to twisting the steering wheel.
2. The second method involves laying the wire on the cable from the brake. This, of course, is longer, but it looks much better. To fix the wire from the cyclic computer Cyclotech on the cable, you need to use electrical tape.

If you use a wireless computer, there is no need to mess with the wiring. This greatly simplifies the installation and looks better.

How to set up a cycling computer?

Wheel circumference

When tuning, you must first enter the length of the wheel circumference. This parameter is very important for the correct operation of the device, because it determines the accuracy of the results.

To determine the exact length of the circle, you must put a dot on the tires with a marker. Next, mark the appropriate place on the asphalt. We make a full turn of the wheels and measure the distance traveled by the bicycle. This is the most effective way.

Also, you can look at the wheel for its diameter and thickness and find a table that will provide the circumference of a particular model. In some bike computers, you only need to enter the diameter of the wheel, which simplifies the task.

Hours and other indicators

The cyclic computer Cyclotech i6 allows not only to determine the acceleration speed and the distance that you traveled, but also allows you to use some useful additional functions.

• The first and quite useful function is the clock. They are easy to configure, this usually does not cause problems.
• Calorie counting. This is a useful parameter, which is also popular. To adjust it, you need to enter your weight. This should be carefully done, since different units of measurement are often used. Most people use pounds.

Possible problems

If you understand how to set up a cycling computer, then you can proceed with this. It takes a little time if everything goes well. It does not always happen. Sometimes, there are problems that you need to be able to eliminate.

• What should I do if the bike computer does not turn on? Usually it's a battery. She can sit down or move away. After replacing the battery, all settings will be reset.
• A computer mounted on a bicycle incorrectly shows speed. In this case, you need to return to the points, how to install and how to set up the bike computer. The problem is precisely this. Since you could specify the wrong dimensions of the wheel or produce poor-quality mounting of the magnet and sensor.

Conclusion

If you decide to install a bike computer Stels, Cyclotech or other high-quality company, then you can quickly install everything. This is a fairly simple procedure, the main thing is to carefully follow each step. Now you know how to set up a cycling computer.