Woodworking machines "Master-universal": reviews and features

Woodworking machines "Master-universal" are great for workshops. New models are actively used for grinding blanks of different sizes. They have an average power rating of 300 watts. If you believe the reviews of many people, then the devices are distinguished by quality rotors and strong holders. Some modifications are made with modular boxes. For milling works, they fit perfectly.

The protection system is mainly used in the PK20 series. Overloads from the network machines are not afraid. If we talk about the minuses of the units, it is important to mention the high energy consumption and the rapid wear of the lining. Modifications with abrasive discs are usually made without a grip handle. In order to understand the machines in more detail, it is important to consider the specific features of specific modifications.

Characteristics of the machine "PC 2000"

Woodworking machine "Master-wagon Rasmus PC 2000" perfectly copes with the milling of products. The stand is used with two holders. If you trust the reviews of most experts, the motor is of high quality. It is also worth noting that the rated power reaches 450 watts. The indicator of electricity consumption is not very high.

The model operates with a pulse-type modulator. The control unit is of the contact type. Many experts say that the device can be used in large enterprises for milling boards. For grinding work the machine (woodworking) "Master-universal 2000" does not suit the specialists in the best way. The price for this device fluctuates around 33 thousand rubles.

Reviews about the modification of "PC 2200"

The machine (woodworking) "Master-station wagon 2200" is produced with three racks. If you believe the opinion of most experts, the spindle of the modification is of high quality. Also worth noting that the machine is great for processing large boards.

The stabilization mechanism is of an automatic type. For grinding work the device is not suitable. The stand for the modification is not very strong. Also, buyers say that the motor is installed on a weak platform. With the milling device copes well. The price for this machine fluctuates around 28 thousand rubles.

Model parameters "PC 2040"

These woodworking machines "Master-universal" are able to perform various tasks. First of all, they are used for grinding blanks. For milling, the model is suitable for specialists remarkably. However, it is important to note that it does not have a central counter. The manufacturer does not have a balance for the modification. The nominal power of the device is only 200W. The system of protection against sawdust at the unit is absent. A high level of noise deserves special attention. The permissible overload indicator is at the level of 20 A.

The protective arm shield is in this case. It is also important to note that the model copes well with longitudinal milling. The working platform allows you to lay the workpiece in a different position. The parameter of the maximum cutter angle is as much as 30 degrees. For polishing the model is not suitable for specialists in the best way. Protection for the abrasive disk is not available for the modification. It costs this machine from 30 thousand rubles.

Characteristics of the machine "2500 E"

Woodworking machine "Master-Estate 2500E" is often used for polishing and polishing products. Its rated power is equal to as much as 230 watts, and the power consumption is not very high. The permissible overload indicator is at the level of 20 A.

The chip protection system is not provided in this case. The rack of the model is located above the platform, and does not take up much space. If you trust the experts, then for the face milling device suits builders remarkably. However, it must be taken into account that the manufacturer does not provide a holder for the modification. Adjust the position of the platform is not possible.

Supports at the machine of this series are made with sharpened ends. In transportation, the model is not very simple. The frame itself is not designed for heavy loads. The support bracket is made of stainless steel, but its thickness is only 1.2 mm. The price for this machine is about 33 thousand rubles.

Reviews about the modification "2530 E"

These woodworking machines "Master-wagon" do a good job with the milling of large boards and bars. Clamps in the standard set of goods are not provided. If you trust the reviews of experts, then the model is great for grinding.

In this case, the frame is on adjustable legs. Also it is worth noting that with the stabilization in the device problems arise infrequently. The modulator is not available for the machine of this series. The control unit is located at the bottom of the frame. If we talk about the minuses of the goods, it is important to note that the milling cutter is very small. Do not install abrasive discs on machines. The rated power is at 300 watts. The overload parameter reaches a maximum of 30 A. The chip protection system is in this case.

The shield of the modification is made of steel. Special attention at the unit deserves a quality motor over the rotor. It is cooled pretty quickly. The overlays at the machine of this series are of a two-sided type. The working platform can be adjusted with the help of handles. The protective system for the rotor is applied in the second class. For grinding work the machine is not suitable for specialists in the best way. There is a modification of about 27 thousand rubles.

Parameters of model "2542 Е"

These woodworking machines "Master-universal" are suitable for small workshops. If you believe the experts' opinions, the platform is used for high strength. Special attention is paid to the modification of the excellent holder. The stand under it is made with overlays.

The casing over the rotor is of high quality. The noise level at maximum revolutions reaches 70 dB. For milling boards the model does not fit well. If we talk about the parameters of the machine, it is important to note that the threshold power is 330 W. The belt transmission protection system is applied first class. The frequency of the shaft is no more than 3 thousand hits per minute. To process short boards, the machine does not fit well. The price for this model starts from 24 thousand rubles.

Characteristics of the machine "2535 Е"

This machine is manufactured with two spindle assemblies. If you believe the experts, then the handle at the modification is reliable. In this case, the clamp retains the milling cutter well. Special attention is paid to the unit transmission unit. Adapter for it is selected belt type.

The support of this machine is used for a length of 23 mm. The frame is installed under the platform, and is securely connected to the legs of the modification. Directly, the clamping mechanism is not adjustable in height. For longitudinal milling of wood blanks, modification suits builders remarkably. The price for it starts from 28 thousand rubles.

Feedback on the modification of "PC 1500"

The specified machine (woodworking) "Master-universal" (2 kW) for milling works is produced with a closed-type spindle. If you believe the experts' feedback, then the modulator is used with a high-quality adapter. The balance bar is directly mounted in the lower part of the structure. It is also worth noting that the machine does not have a transmission blocker.

The shaft of the modification starts smoothly, and the bushing does not wear out much. The noise level of the motor is at 55 dB. If you believe the customers, then work on the machine is quite comfortable. However, the protective shield is very short, and during milling it is easy to damage your hands. In the market, the modification is sold for 37 thousand rubles.

The parameters of the model "PC 1550"

This woodworking machine "Master Wagon" reviews are positive. The modification is distinguished by a strong frame and adjustable legs. Many experts say that the model easily adjusts the support. For longitudinal cutting of bars, the device is used quite often.

Also worth noting is that this model uses a good spindle node. For carrying out grinding work the model fits well. The gear unit is used in the belt type. The rotor uses third-class protection. The blocker above the motor is mounted on a special rack. Many experts say that it is problematic to remove it.

A compact stand above the platform deserves special attention from the unit. There is no possibility to regulate it in height. However, it has stops especially for fixing large blanks. The price for this machine starts from 33 thousand rubles.