We build in Canadian, or the technology of building a frame house

A person's dream of own housing is quite feasible. And your main assistant in this is the Canadian technology of building a frame house. It has become so popular because of the simplicity, speed of construction and high performance of the building. We will tell you how this happens.

Floors

The production kit of the house is delivered to the construction site. A detailed assembly drawing is attached to it. First, the foundation is poured, the panels are put on it, performing the role of floor slabs. Unlike walls, they additionally require insulation from below, for which they are coated with bituminous mastic. All panels are interconnected, pre-stop, and fixed with screws. The thickness of the polystyrene boards is sufficient to ensure that the floors are warm. The technology of building a frame house allows them to be built on top of them with a system of warm floors. From the ends to the technological ends of the panels, the strap is placed, it increases the structural strength in a horizontal position. All these works take only a few hours.

Walls

Next, the construction of a frame house implies the erection of wall panels. To do this, the straps are fixed to the floor overlaps using self-tapping screws. To place this material correctly, check with the template. Then it is necessary to drill holes for anchor bolts, they connect the beam and panels and fix the structure on the foundation. The construction of the walls should begin from the corner of the house, securely attaching the panels to the strapping beam. The second wall panel is attached to the first at a right angle, pre-sealing the connection. All parts are connected with each other with self-tapping screws of 220 millimeters length.

Bay window

The technology of building a frame house also allows you to increase the space with this architectural solution. The erector construction is assembled from modified panels that are connected at indirect angles. Technological grooves are filled with foam and put straps in them.

Overlappings

The panels of the interfloor overlap, despite the lightness, are strong enough. For greater strength of the structure, they are attached with self-tapping screws to the beams.

Roof

The supporting elements of the gable roof are panel pediments, which, in turn, are joined by parallel bearing beams. Work on the installation of the roof begins with a "skate" (main beam), which has a bilateral lateral bevel equal to the angle of the ramp. In order to avoid deformation of the panels in winter between the ridge of the roof and the walls parallel to it, each ramp is supplemented by intermediate beams - girders. There are support bars for support. If the area of the house is 300-400 square meters, the roof is collected about two days by the forces of 4 people. The technology of building a frame house is the installation of finished panels according to the drawing. Panels provide a high thermal and sound insulation of the structure, which allows you to do without additional insulation of the roof, you only need a clean ceiling finish from the inside. The outer surface will be suitable for laying the roof.

Doors and windows

They in the frame house can be of any known design, and the methods of their installation will not differ from those recommended by the manufacturer.

Using an approach such as the technology of building a frame house, you will realize your dream with your own hands - you will acquire your real estate and invest in it a minimum of money.