Silicone paint for interior and exterior use

The place of paint and varnish coatings in finishing activities remains significant even despite the expansion of the range of alternative finishing materials. However, the compositions of building and decorative emulsions also do not stand still and are improved, which allows them to compete with other design tools of various surfaces. Quite quickly, the market has mastered the silicone paint, represented by the compositions for both internal and external decoration works.

Features of silicone paints

A distinctive feature that determines the characteristics of the coatings formed by such paints is the content of silicone resins. If we compare the effect of this component with acrylic polymers, then the absence of thermoplasticity will come to the fore. This means that in conditions of temperature increase the structure of the paint coating will not soften. At the same time, there are many differences within the family of such compounds. For example, silicone wall paint has self-cleaning properties, which facilitates the care of the coating. In turn, the facade models are oriented by the manufacturers to protective qualities - first of all from mechanical damages. It should be noted that almost all the compositions are well combined with mineral paints. That is, the silicone coating can be applied to cement-lime base, brick, concrete or fibrous panels.

Performance of silicone paints

Among the characteristics that stand out against the background of other paint and varnish materials, we can note a high enough vapor permeability, moisture resistance and elasticity. The ability to interact with steam allows the composition to actively penetrate the structure of the roughing surface and, over time, maintain optimum adhesion qualities. As a result, the coating will not exfoliate, but only if there is a reliable coupling with the surface of the old layer. The waterproofness possessed by silicone paint is not a unique quality, but it is its natural property, which, unlike other agents, is not achieved due to modifiers and special additives. In practice, this means that the silicone compound can act even as a waterproofing on the roof. With regard to elasticity, this property determines the ability of the coating to easily mask defects on roughing surfaces. Actually, this quality and determined the priming nature of the use of certain products on a silicone basis.

Compositions for the facade

Modifications for outdoor works are represented by different lines of silicone paints. Conditionally they can be divided into two categories - protective equipment and priming. The first category is intended for finishing plasters, wet walls, porous cladding and heat-insulating structures. In such works, the main requirement for paint is the ability to form a resistant water-repellent coating that fills the micropores tightly.

Similar qualities have a silicone facade paint with a primer function, but its task is still directed to the mechanical preparation of the surface without decorative effect. Typical primer strengthens the substrate, penetrating deep into the surface, and then provides a waterproof coating that does not allow the passage of salts, moisture and steam. It should be noted that the use of facade modifications not only for walls, but also in the work with concrete socles, curbs and other structures and structures that have special requirements for external protection.

Silicone paints for interior work

This category of paintwork is also called interior. These are the means that can be used for walls, ceilings and other surfaces indoors. The main advantage of all interior colors is decorativeness. However, silicone modifications do not greatly benefit in terms of the aesthetics of the final result of competitors. First of all, the choice of such a means for interior finishing is beneficial to physical and operational properties. Use, for example, silicone paints for the ceiling is recommended for the reason that the coating is resistant to dirt. The upper surface is considered the most problematic in terms of care, so applying such a composition will provide an advantage in the form of practicality. The same applies to restoration paints of this type, which do not accumulate dirt and dust.

Special Purpose

The established limitations, which apply to the choice of finishing materials for rooms with high humidity, are gradually eroding. If before it was impossible to imagine the presence of wood finishing, directly in contact with water, then today it is not difficult to find a moisture-resistant laminate on the market. Spread also received silicone paint for the bathroom, which is part of a group of water-based compounds. In the same category, latex and acrylic modifications are presented, but they are not so good in terms of ease of application and practicality of operation. The silicone base, as already noted, is not demanding on the rough surface. That is, even in conditions of high humidity coefficient and unsatisfactory condition of the walls in the bathroom, the user can count on obtaining a qualitative result. And in the future the applied paint differs with sufficient adhesion and mechanical strength.

Reviews about silicone paint

Users of such compounds note first of all ease of care. The coating is easy to clean, not sensitive to cleaning agents and in itself reluctantly collects dirt particles on the surface. The obvious advantages of such means in relation to painting works are underlined . To prepare the roughing base, the coating requires minimal effort, which also expands the range of advantages that silicone paints possess. Comments on wear resistance do not give grounds to doubt the durability of such coatings, but here it is important to note one nuance. Since silicone compounds appeared on the market not so long ago, few users could verify their operational resource in full.

Manufacturers

Traditionally, the "Tikkurila" brand is on the list of leaders in the sales of paint and varnish coatings. And in the case of silicone compounds the same situation is observed. The manufacturer offers both specialized and universal means of this type, however, at high prices. Those who want to save should pay attention to the line "Elkon". Despite the relatively low cost, this brand of silicone paint provides a complete set of characteristics inherent in water-based coatings. Especially for the decoration of ceilings it is recommended to contact products "Oreol" and Dufa. As the reviews say, even on the worn surface of the coating, they are held confidently and easily washed.

Conclusion

In the list of consumer qualities of paint and varnish coatings, users are increasingly making such a characteristic as environmental friendliness. Improvements in the formulations almost always involve the addition of new additives, plasticizers and other inclusions that do not have the best impact on safety performance. From this point of view, silicone paint also does not disappoint demanding buyers. Of course, much depends on the integrity of a particular manufacturer, who develops technology and tracks the process of making the composition. But the example of high-quality paints of the level of "Tikkurily" and Dufa confirms that the chemical harmlessness of silicone coatings is quite real.