Screwdriver "Hammer": reviews

Not so long ago a screwdriver could be found only in the arsenal of a professional, even today this home tool is purchased by the home masters to unscrew and tighten the screws, bolts, and screws. With this tool, you can drill holes in almost any surface. However, before making a purchase, you need to decide what type of screwdriver you need.

Recommendations for selection

In the store you can find household, semi-professional and professional models. In the first case, it is an instrument with which you can untwist or tighten fasteners, assemble furniture, hang a picture or change the lock. Such equipment is designed for not too frequent use. The torque in this case varies from 10 to 15 Nm. But as far as professional models are concerned, they can not only be twisted or unscrewed, but also drilled fairly hard surfaces. This device can be used quite often, but the torque in them reaches a mark of 130 Nm.

Select by Brand

It is important to determine more and with the manufacturer, for example, the Hammer screwdriver is quite popular, because this product has proved itself from the positive side. If you also decided to choose the products of this company, then you should get acquainted with the reviews, because it is from them that you can understand what version of the screwdriver to purchase.

Reviews of the model ACD120C PREMIUM

The Hammer drill-screwdriver costs 5000 rubles, the battery has a voltage of 12 V. It should be taken into account that this parameter in different models can vary from 1.2 to 36 V. By voltage you can judge how productive will be Tool, as in power judge the tools that are powered from the network. The higher the voltage, the more impressive the device will have.

The maximum value of this parameter, as a rule, is for cordless screwdrivers. However, it must be taken into account that the voltage is not a constant value, it reaches a peak after charging the battery and falls to a point where the inclusion is no longer possible. According to buyers, the voltage may decrease when the instrument is stored.

The described Hurmer screwdriver achieves a maximum torque of 30 Nm. This is the amount of screwdriver force. The higher this parameter is, the more work you can do with the tool. Consumers especially note that it is important to pay attention also to the battery capacity, which in the model described is 1.5 Ah. This parameter characterizes the accumulation of energy by the device. On it it is possible to judge how long the use of the unit is possible. We can say that there are limits of indicators, they vary within the limits of 1.1 to 3 Ah. If you have a tool with a high-capacity battery, the duration time will be increased, which, according to the buyers, is very convenient when you are removed from the power source.

For reference

Large capacity is recommended for intensive use of the tool. If the value is small, it will take quite a lot of charging, which can lead to deterioration of the battery and the appearance of a memory effect.

Consumers are also advised not to choose a tool with a battery of too high capacity, because in this case the size and weight of the device will be impressive.

Additional feedback on the operational features of the model

The Hammer (12 Volt) screwdriver described above works with a NiCd battery, of which there are two. Turnovers can range from 0 to 350 or from 0 to 1200 per minute. The maximum speed is 1200 minutes. Consumers like that this model is able to perform the functions of not only a screwdriver, but also a drill, among other things, the device has a quick-action chuck. The diameter of the latter is 10 mm. Consumers note that the described Hammer Screwdriver has many additional advantages, among them it should be noted that the drilling diameter of wood is quite impressive, this value is 20 mm. There is a speed control, as well as an engine brake. The device weighs only 1.5 kg, which does not burden the operator's hands. Consumers note that the equipment is shipped in the case, which is very convenient for this device.

Reviews about the model ACD182Li

The above-mentioned screwdriver "Hammer" (18 volts) costs 5500 rubles. The battery voltage is 18 V, but the maximum torque is 24 Nm. Battery capacity is 1.3 Ah, which, according to customers, is a good indicator. Consumers especially note the number of revolutions per minute, it can vary from 0 to 400 and from 0 to 1200. The number of revolutions is a value that reflects the maximum possible number of shafts per minute. If this indicator is quite impressive, then the tool will better cope with drilling operations. But often the maximum number of revolutions is proportional to the power capabilities. Consumers are advised to consider this before buying equipment. The kit includes a quick-clamping chuck with a diameter of 10 mm, a twisting force of 16 positions.

In metal with this tool you can drill 8-mm holes. As for wood, this value will be equal to 23 mm. The time of full charge, as the buyers claim, is 3 hours, which is not always convenient. However, after this the Hammer Screwdriver will be ready for use. The weight of the device is 1.6 kg, but this feature is not the only one. Among the additional advantages of home masters note the presence of reverse, electronic adjustment of the number of revolutions, as well as lighting the work area.

Reviews about screwdriver brand ACD142Li

For yourself, you can also choose a Hammer screwdriver, reviews about it, however, it is recommended to read it before going to the store. For example, the above model will cost the customer 5000 rubles. The battery voltage in this case is 14.4 V, but the maximum torque reaches a value of 20 Nm. Screwdriver battery Hammer has unique characteristics, according to consumers. Among them, one can single out the presence of a quick-action chuck, whose diameter is 10 mm. Buyers also note a rather long warranty from the manufacturer, which is 36 months, as well as impressive parameters when drilling. For example, wood and metal can be drilled with this equipment by making holes of 19 and 8 mm, respectively.

This Hammer Screwdriver, reviews about which are only the most positive, has two or more mechanical speeds, it has an engine brake, reverse, electronic speed control and illumination of the working area. In addition, it can be noted that the weight of the device is only 1.4 kg.