Manicure with Scotch tape: step by step instructions, interesting ideas and recommendations

With the appearance in the arsenal of nail designers of the airbrush, the thinnest lines and the most complex drawings are no longer a problem. But how to save money and make a beautiful design yourself? To the aid comes a thin manicure tape.

What is a manicure with scotch

The design on the nails has long imitated a different structure: leather, velvet, knitwear, marble and the like. Applying the technique of layer-by-layer coating, masking the areas with adhesive tape, you can achieve interesting drawings that mimic the fabric.

When the master pastes a piece of tape to the nail, it remains uncoated with varnish. This principle is the basis of this technique. If several times use this technique, the masking covers all the new areas. So you can achieve fine smooth lines and identical patterns on all nails, which is impossible when drawing.

Manicure with Scotch tape: ideas

A detailed consideration of these styles will help you choose the right design. All are united by one principle - the use of thin tape. You can buy it in a professional store or order it on "Aliexpress".

The manicure with scotch is in the following styles:

• "Patchwork".
• "Fry villa style."
• "Nautical".
• "Plaid".
• "Rye".
• "Aragail".
• "Puzzles".

"Patchwork quilt"

"Patchwork" - a design that resembles a patchwork quilt. Usually these are colored squares or diamonds. First, the nail is covered with a light tone, for example, a pastel mint. Then, after drying, paste thin stripes. They need 4 pieces, glue obliquely, as if dividing the nail into three parts. Two on the diagonal with a distance of about half a centimeter and two others perpendicular to the first to make the squares.

Then, each square is carefully painted over with a semi-dry brush, applying a method of printing the color. When the coating dries, remove the auxiliary ribbons and cover the nails with top.

"Scotland" - often red and green squares, on which a red background of green thin strips pass. It is done similarly to the first variant, but the substrate is made white. After removing the auxiliary ribbons, some white stripes are painted green. This can be done with a brush with a very long thin hair, it was created specifically for the application of straight, thin lines.

"Fry villa style" is almost the same, but squares are not so strictly located, and you can not make a mint color substrate. You can do with two ribbons, glued crosswise.

Colors can be any, but not dark. After removing the auxiliary ribbons draw a border of color gold or silver gel pen. Well dried and covered with top. Some stick new ribbons instead of drawing. It's not for long. The foil leaves even through the top, opening the cover. These tapes are auxiliary, they are not suitable for such design.

Multi-colored stripes

"Sea" - a style in which there are blue bars on a white background. The nails are covered with white lacquer. After drying, thin strips of tape are placed, covering them with half of the nail. Some pieces are glued obliquely. Blue streaks are stained. One or two nails can be done in red strips. You can depict a red semicircle on one nail and place the inscription with white dots. It will be a lifeline.

"Raye" - multi-colored stripes, may not be the same width. The main thing - contrasting tone. It is similar to the sea strips.

"Aragail" - the design of strict light and dark squares, crossed out with a white dotted line. Good looking blue and beige combinations.

"Puzzles" is a cheerful drawing that you can just do yourself. The nail is divided into four parts, the dark and light squares are located opposite each other. After drying, large dots of contrasting tones are placed. It turns out an imitation of puzzles. Look good yellow with red, pink with black, orange with green.

All ingenious is simple

A simple manicure with scotch is obtained if the part of the coating is shiny and the part is matte. For this you need two tops: normal and satin. First we cover the nails with the usual top, shiny. Then, after drying, we mask them with the usual paint tape, which is located diagonally. We apply a matte top, after drying we remove scotch.

It turns out a simple and effective manicure. On light shades, it is better not to use this technique, it appears juicy and bright only on deep dark ones.

Good for this design plum, eggplant tone, black, cherry, burgundy. Manicure with tape can not be done on all nails, use a matte top - and this will significantly increase the number of possible design options.

What will be required for manicure with scotch

From the usual masking tape you can cut out stencils. Especially wavy or dentate lines. They mask a light substrate, which is then painted over with a dark contrast lacquer. Such a stencil is located along the lateral ridges. If there is absolutely no ability to draw stencils - it does not matter.

A manicure with scotch can be done without them. A simple masking of the vertical strip in the middle of the nail is also very effective. It can be put on the rhinestones and go on holiday.

But it is best to master the technique using professional thin tape. It comes in many colors. This is used when masking layers in complex designs. Consistently removing the same color strips, apply a coating on all nails. Obtain identical drawings.

So, manicure at home with tape means the following materials and tools:

• Thin professional colored tape.
• Painting Scotch.
• Scissors.
• Tweezers.
• Base varnish covering.
• The top is shiny and matte (optional).
• Palette for wringing out a brush.
• Gel pens - gold, silver and black (optional).

A small master class of work with adhesive tape

How to make a manicure with scotch tape? Everything is described in detail by our step-by-step instruction:

• First it is necessary to make a manicure, give shape to the nails and cut the cuticle.
• Then the nails are covered with a thin base layer.
• After drying, a color is applied, which will serve as a substrate.
• After drying (some do it the next day), mask the nail with adhesive tape in accordance with the chosen design.
• Semi-dry (not dry, just well wrung out!) Using a brush method, gently patch the areas.
• If the design requires it, the color border is drawn with a gel pen (not necessarily).
• After drying, remove the tape and cover with top.
• If necessary, repeat masking and color application.

Whichever you choose the design option, even the simplest, you need to dry the lacquer well and only then remove the scotch tape. This ensures smooth lines and spectacular results. In addition to accuracy and caution, nothing is required. Try to make yourself a gift, and you will definitely succeed.