Male and female knitting sweater: a schematic

In the new season, the knitting collection takes the leading position of fashionable things. In boutiques you can buy a lot of different things from yarn machine or handmade, but if you have the skills of knitting, everything becomes much easier. You do not have to buy knitted sweaters with knitting needles, with schemes that the newcomer can handle well. You can create any model you like on your own.

Popular models of men's and women's sweaters with knitting needles with patterns you can find in this article.

Yarn and Scheme Selection

Before you start creating a masterpiece, you need to prepare and fulfill certain conditions. Choose knitting sweater you like with knitting needles. The scheme of the model should be carefully studied. Decide on the color and material of the yarn. It can be natural wool or thread with the content of synthetic material. It all depends on what result you want in the end.

Tool selection

After you have chosen the yarn, you need to pick up the spokes. Remember that the thickness of the thread should be approximately equal to the thickness of the tool. Only in this case you will get a harmoniously connected canvas.

There are many options for how to knit a sweater with knitting needles. The creation scheme may indicate the need to have standard long needles or a circular tool. Also, when creating patterns, you may need an extra stocking knitting needle.

Trial element

There is another stage in preparation for work that must be done before the sweater is tied with knitting needles. Schemes of all works require the creation of a so-called probe. You need to tie a section that has a size of 15 loops into 15 rows with the chosen tool with a suitable yarn. After that you need to measure it with a ruler or a centimeter and with the help of the initial mathematical knowledge to make a calculation. Your task is to find out how many loops and rows make up one centimeter of work.

Knitting Patterns

There are a lot of sweaters for women, men and children now. It can be a model with a high neck or, conversely, a deep neckline. With classic long sleeves or without them at all.

Technique of mating

In the described models, the following binding elements are used.

Elastic:

1. First row: two purl loops, two facial;
2. Second row: two facial loops, two purlins.

In fact, you should have purl over the purl, facial over the facial.

Facial smoothness:

1. All facial rows are tied with facial loops;
2. All purl rows have purl loops.

Grooming:

All rows are knitted with facial loops, regardless of the product flip.

Pearl knitting:

1. First row: one loop front, one purl;
2. Second row: one face loop, one wrong.

In work on the front loop, you need to knit the wrong and vice versa. It is necessary to take into account the product revolution.

Male sweater with knitting needles: scheme of work

Before you start a set of loops, you need to determine its number. To do this, measure the man for whom the work will be done. You will need the following dimensions:

• Waist circumference;
• Shoulder width;
• Torso height;
• the length of the sleeve;
• Circumference of the wrist;
• Distance from neck to shoulder;
• Circumference of throat.

After taking measurements, you can begin to knit a sweater with knitting needles. The scheme of this model is quite simple and will be able to even a novice master.

Crochet knitting

First, calculate how many loops the hip circumference is. After that, divide the number obtained by two, since the backrest and the front of the product will be connected separately. Type the required number of loops and tie ten centimeters of elastic band. After that, go to the creation of the main canvas. Knit the facial smoothness as much as the height of the male torso.

When the required size is ready, close the work loops neatly, without tightening the threads. Then start creating the second part of the work.

Knitting is handed over

Similar to the previous step, type the loops on the spokes and tie the ten centimeters with an elastic band. Next, knit the main fabric facial smoothness, but about 15 centimeters to the end of work, it is necessary to begin the creation of the neck.

To do this you will need additional spokes, since the work will have to be divided into two parts. Close the three middle loops in a row and knit first one side. In each face row, close two loops. Continue to do this until you have the required length of the shoulder length.

Similarly do the knitting of the symmetrical part. Close the working hinges.

Sleeves

The knitting pattern of the sweater with knitting needles provides for the separate creation of sleeves. Type the number of loops equal to the size of the wrist and tie the elastic band ten centimeters. After that, knit the sleeve up to the elbow with the facial smoothness . Next, in each facial row, you need to add one loop. To do this, tie the last loop of the front and immediately make the purl. As a result, you have two loops from one loop.

Knit the sleeve to the desired size, then close the hinges. Similarly, connect the second part. Remember that a knitted sweater must be symmetrical with knitting needles. The scheme for creating symmetric parts must be the same.

Assembly

When all parts are ready, you need to properly and accurately collect them. The knitted male sweater knitting needles assembly scheme is different. If you are a novice master, then choose the simplest zigzag stitch. Sew the parts from the underside of the product and iron the fabric. The sweater is fully ready for the intended use!

Women's seamless pattern

Knitting patterns for women's sweaters differ slightly from each other. You can create a model that will be linked to the scheme of the male product. Also you can show imagination and make an original and unique work. Before you start a sweater with women's spokes, the product layout requires taking measurements. Find out the size of the following parts:

• Breast volume;
• Volume of hips or waist (depends on the desired length of the product);
• the length of the sleeve;
• Length of wrist;
• Torso height;
• Height from waist to armpit;
• Throat volume.

Knit such a model is necessary on long circular knitting needles. Take into account the necessary number of loops and select the length of the tool under it.

Type on the knitting needles and start knitting the work in a circle. Tie ten centimeters garter stitch. After that, proceed to use the pearl pattern. Knit such a scheme to the level at which the hole for the sleeve will be.

Have patience, because the work will seem to you a long and laborious. All due to the fact that the knitting back and transfer takes place simultaneously. Your efforts will not be lost, thanks to your diligence you will get a sweater without seams.

When you have reached the level of the sleeve, you need to divide the work into two parts for this, take one more circular knitting needles and transfer exactly half of the loops to them. Continue to knit the remainder exactly as much as the distance from the armpit to the neck. Close the working hinges. The back is ready.

Next, you need to modify the front of the product. Think about what will be the collar of the sweater. At the required level, close the part of the hinges. Your work will again be divided into two halves. First, knit the first side. To do this, close two loops in each front row. When the required height is connected, proceed to work with the second part. Similar to the first, close the loops in each front row.

At the end of knitting the main part, sew the work on the shoulder joints.

Knitting Sleeves

In order to tie the sleeves for a sweater and do not use seams to attach them, you need to use the following instruction.

Slightly stretch the cutout for the sleeves with your hands and draw new loops from it with a free working thread. In this case, you can use knitting needles for knitting or give preference to a circular tool, but already having a shorter length.

So, you typed a loop. Now you need to start knitting the sleeves. For this, on the knit all the same pearl knit. When you get to the level of the elbow, you need to close a few loops. To do this, through an equal number of connected elements, tie two loops together. This item can be skipped if you want to get an even wide sleeve.

When part of the product is almost ready, make the cuffs. To do this, tie with garter stitch ten centimeters and netogo close the hinges.

Similarly, knit the second sleeve. Remember that they must be symmetrical. Only in this case you will get a beautiful and even product.

Neck

Before you finish the sweater with knitting needles, the scheme recommends that you fill out the neck. In this case, the product will look harmonious.

Stretch out a little with your hands a cutout for your head and draw new loops along its perimeter with a free working thread and stocking knitting needles. If the sleeves were connected with a circular tool, then in this case it is also better to use it.

Tie a double rubber band three centimeters and gently close the working loops.

An alternative option for creating a collar can be a separately bound bar, which will subsequently be sewn to the main part of the work. In the same way, you can make a wide or high gate.

Hide the protruding threads with a hook or a knitting needle and iron the product.

Conclusion

Knitting a sweater with knitting needles is a pretty long job, but you will not regret if you make the model you like with your own hands. In this case, you will save money and bring joy to the owner of the created product.

A sweater made by one's own hands will be an excellent option for a birthday present, a New Year or another celebration. You will save money on the purchase of the presentation and hold up an original and useful gift.

Remember that after washing the wool product may slightly decrease in size, so it is better to tie the model a little larger than then it will turn out to be small. Try to wash such things by hand using special cleaning agents.

Knit with pleasure and please your hobby with relatives and relatives. Success in knitting!