ComputersEquipment

HP 2035 Entry Level Laser Printer: Description and Specifications

An entry-level solution is a printer based on the laser printing method HP 2035. This is indicated by rather modest specifications and cost. This budget solution will be considered in detail in the proposed material.

What part of the market of printing equipment is this device aimed at?

As noted earlier, the HP 2035 is positioned by the manufacturer as an entry-level product. It has a small print resource for 30 days, low cost and medium print quality. As a result, it will be most optimally used in the following cases:

  • At home (if the requirements for quality of documentation are mediocre and there is no need for printing in color).
  • In a small office with a workstation of no more than 5-7.
  • In a similar working group.

In these three cases, the resource of this laser solution will be sufficient to ensure the need for printing in its entirety. Also, in combination with multifunctional devices of medium and even premium class, this printer can be used already in all other cases, for example, in a large office or copy center.

Equipment

Very modest, even by the standards of the budget segment of the market of printing devices, the configuration of HP 2035. It includes the following:

  • Printer.
  • Initial cartridge.
  • Disk with software and documentation.
  • Quick start guide.
  • Power cable.
  • Warranty card.

In the above list there are 2 significant drawbacks. One of them is the lack of an interface cable in the original configuration. In some cases, sellers specially complete the basic equipment with such an important accessory. If it is not, then it will have to be purchased separately. The second important drawback of the initial configuration is that a full manual on configuration and operation is only available electronically on a CD. But its paper version is essentially a short brochure, which is not enough to fully configure this solution.

Paper

это А4, длина которого составляет 297 мм, а ширина — 210 мм. The largest sheet size for the HP LaserJet 2035 is A4, which is 297 mm long and 210 mm wide. Also in the list of supported formats there are also his "younger brothers" - A5 and A6. The developer did not forget to supplement this list with C5 and B5. In an extreme case, the drivers can specify an arbitrary media size, but its size should not exceed the maximum possible A4. 2 . The density of the paper should be between 60 and 163 g / m 2 . If you use a medium with a smaller or larger density, it is possible that the sheet feeding system is broken or scrolled. The maximum resolution of prints in this case is 1200X1200.

Also there is a draft mode in which the performance is increased and the toner consumption is reduced. In this case, the documents are printed in 600X600 resolution. In the first case, it will be most optimal to print diagrams and various pictures, and in the second mode - text.

Speed, print resource per month

The strength of HP 2035 is the speed. To warm up this printer from the state of sleep, you need only spend 10 seconds. To obtain the first print, you will need to wait another 8 seconds. After that, the speed of the pages from this printer will be fixed and will be 30 sheets per minute. The maximum resource for printing for 30 days is set by the manufacturer at a value of 25,000 pages.

Drivers, ways to connect

HP LaserJet 2035 can boast of the most common operating systems to date. In this list, the manufacturer has included "Windows" (including the most recent versions of this operating system, both 32-bit and 64-bit versions) and "McOS ". But with the system software "Linux" or UNIX, this printer will not be able to interact for the reason that the drivers of the digging company have not provided for them.

The expanded list of interfaces is equipped with HP 2035. The manufacturer included USB and LPT. Optimum in conjunction with this printer use the first of them for the reason that it provides 10-15 percent higher performance due to the increased data transfer speed.

Cartridge

Just one model of the cartridge can be installed in HP 2035 - it's HP05A with the prefix Black. In the initial state, this cartridge can print up to 2000 pages. Later, after refilling, its resource will increase to 2300 sheets. It is charged only with black toner and can only be printed in monochromatic mode.

How to install, connect, and configure

The following manipulations must be performed in order to start using the HP LJ 2035 for its intended purpose :

  • звлекаем из коробки принтер и прочие компоненты его поставки. And we draw from the box the printer and other components of its delivery.
  • Install the peripheral device next to the computer.
  • We connect the interface cable to the computer and the printer, and the power cable to the outlet and to the printer.
  • Install the disk with the software in the drive and install drivers from it.
  • When finished, print a test sheet.

Reviews, prices

The HP LaserJet 2035 printer, according to user feedback, has the following strengths:

  • Just a huge print resource for a month.
  • High speed and exactly the same quality.
  • Advanced set of connection methods.
  • Easy to set up and use for the right purpose.
  • Minimum costs for toner and other consumables.

The drawbacks in this case include:

  • Relatively high cost (about 11,000 rubles).
  • Shortened equipment.
  • The lack of support for some fairly common operating systems.

Results

One of the best representatives of the budget class based on the laser method is HP 2035 . It is perfect for organizing a printing subsystem at home, in a small office or a small workgroup.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.