How to sunk the rear window yourself

Toning is the process of applying a special film to the car glasses that protects the driver from direct sunlight and the curious looks of others. In addition, machines with tinting have a more attractive appearance. Often this film is made of polyester in different shades. At the same time, its outer layer protects the glass from mechanical damage due to the content of a small metallic composition. And if before toning was available only to rich car owners, now you can buy such a film without any problems. And in order for it to look really good on the car and perform its functions qualitatively, you need to know how to properly darken the car's windows. This will be discussed in today's article.

How to sunk the rear window of VAZ, or What should be taken into account when buying?

To begin with, we note that a few years ago in Russia a law was passed on the toning of cars, which prohibited the use of films with low light transmittance. Thus, when buying, you need to look not only at its color (and it can be not only black), but also on the percentage of light transmission. According to the standard, the norm of the degree of blackout of the film should be at least 70 percent of daylight. In this case, the rear window and the rear side can have any transmittance.

Under a special ban came the so-called mirror film. It is prohibited by law for use on cars. If you follow these rules, then it will not be difficult for you to pass through maintenance and to avoid problems with inspectors of the traffic police.

Electronic tinting

As a small digression, let's say a few words about this innovation of tint films. Recently in Russia there are more and more masters who are engaged in its installation, but few of the car enthusiasts know what it is special about. The main difference between electronic toning is the instantaneous change of light transmission. By pressing just one button of the key fob, you can change this parameter from 0 to 100 percent in 2-3 seconds or vice versa. And this is not a crime, and before the traffic police post there is the opportunity to quickly change the shade and thus not get penalized. True, the cost of such a film is from 2 to 10 thousand dollars, and its installation is impossible without special skills and tools. Therefore, electronic tinting remains for our motorists an invisible luxury.

Choose a color

As for color, it can be very diverse. However, the most popular recently, along with black, is considered a silver shade. And it is applied only on the upper half of the glass and like a chameleon changes its brightness under different angle of sun rays.

How to sunk the rear glass with your own hands? Cooking tools

In the course of the work we will need: a rubber spatula, a stationery knife, detergent or shampoo, a clean rag or rag, and a spray gun. In the event that this film is applied to the rear or windshield, you must also prepare a hairdryer. The latter will help to eliminate the bubbles and creases formed during application.

Preparing the surface for film application and the process of sticking

Before you sunk the rear window, you must thoroughly wash it. Remember that its surface should not contain any fatty formations, dirt, stains and road dust. Otherwise, the toning will simply not stick to the surface and the next day will disappear. Also pay attention to scratches. If there are chips and other deformations on the glass walls, it is very difficult to paste a film without bubbles here.

By the way, if you are going to tint not only the rear, but also the side windows, for better results, you need to remove the seals. The film itself is applied exclusively to the inside of the glass. This will help avoid frequent mechanical damage that can occur during the operation of the car.

After thoroughly cleaning the glass, dilute the soap solution and fill it with a spray gun. This tool will be used to wet windows and glue to their surface a thin film.

Because car toning is sold in rolls, you need to cut off the required amount before the label. Do it better not strictly on the contours, but with a small margin of 1-3 centimeters. The extra part after installation can be very easily removed.

How to sunk the rear glass further? Before the application, the film is wetted internally with a solution of a spray gun. After that, you can safely put it on the glass. In the case of air bubbles, it is necessary to peel off part of the film and use a spatula to smooth the surface. Although it is possible to remove air after complete application of toning. First, the film is wetted from above with water, then we pass through the entire perimeter with a dry cloth. Next we take the spatula in hands and finally we smooth the surface. Using scissors, gently cut the excess part of the film along the edges. The smaller the scissors, the more careful you do the work. If you want to know how to sunk the front windows, you can safely use this manual. It is universal for all windows in the car.

For the final fixing of the tint on the glass surface and for its more natural appearance, it is additionally treated with an industrial hair dryer. Thanks to him, the film will not only take the desired shape and shape of the window, but also dry faster. By the time you can sunk the windows of the car with your own hands for 1.5-2 hours. Everything depends on the area of the windows and the scale of the work.

Conclusion

The main plus of independent toning in comparison with the professional is cheapness. After all for the same period of time you get the same result, and in our case you will also gain experience with this kind of tuning. As you can see, sticking a film on the glass surface is not so difficult. The main thing is to thoroughly rinse and degrease before this. Well, all the necessary tools and tools for this you can buy in almost any store.

So, you figured out how to sunk the rear glass with your own hands correctly.