How to make a crossbow of pencils? Detailed master-class

If there was such an incident that the parents for their son forgot to take toys to the village, there is nothing left to do but to make a crossbow out of pencils. In general, this way to entertain the boy is extremely convenient and in the evening, when he suddenly attacks the disease "bored, what should I do?". Since making a crossbow from pencils can be done in almost half an hour with minimal costs, this useful lesson will help to save on buying a new toy.

Materials for making a crossbow

To make a self-made crossbow of pencils, you need four pencils, seven medical gum, a ballpoint pen or a tube, an adhesive tape. In the master class, also considered are the options for making a crossbow from school rulers or old bows.

It is recommended to attract the child to work. He can quite cope with the work assigned to him, as making a crossbow from pencils is extremely simple.

The first step is preparing the parts for the self-fire

If it is decided to use pencils as the starting material, then first you need to connect them two on two sides with the help of medical elastics or tape. In some cases, gum and tape can be replaced by strong threads, wound them in several layers and tightly tied. The denser the connection, the longer the toy will last for the child.

You can decorate the bonded pencils by wrapping them with colored tape or a paper strip, for example, serpentine. If desired, the paper winding master is free to cover with paint or varnish.

The second step - the assembly of parts in the basis of the crossbow

The next step will be to combine the components obtained from the two pencils into a single system. To do this, it is necessary to fold the finished parts crosswise so that the parts of the base of the self-shot are strictly perpendicular to each other.

The center of the crosspiece can also be fastened with medical rubber bands, but in the absence of them, it is quite possible that the joint is made with adhesive tape. Since it is sometimes necessary to make a crossbow of pencils in marching conditions, then twine, cord and thread can also be used. It is important only to wrap them very tightly, and tighten them tightly.

The third step is the preparation of the guide tube

When the crossbow base is made, you can proceed to the next stage of making a self-shot. For him, the master will need a pipe, which will guide the arrow.

As a tube it is good to use a piece of ballpoint pen or felt-tip pen. However, it is necessary to disassemble a thing, having released a tube from all unnecessary. By the way, plastic disposable syringes can also be used if carefully cleaned with a sharp knife or a hacksaw. Of course, the adult must perform this work independently, not trusting her child. Do not risk and expose the health of the growing personality of danger.

Step Four - the last stage of the assembly

The prepared tubule is attached to the middle part of the crossbow, guiding it along the pencils. A crossbow made of rubber bands and pencils will be more accurate if the tube is tightly "sitting" in its place, so the fixing should be given special attention. It is also important to place it exactly between two pencils.

Step five - fixing the start-up gum

Making a crossbow with your own hands from pencils, you should consider how the arrows will be launched. To do this, you can use two medical gums, which should be fixed to the ends of the pencils transverse to the guide tube.

It is allowed to use ordinary sewing sewing rubber in work. Then a piece of it is simply tied to the ends of the connected pencils.

Step Six - Finishing

Practically, the master class, explaining how to make a crossbow from pencils, came to an end. It remains only to connect the two bands that are attached to the ends of the double pencils. You can do it with a narrow tape. It should only be remembered that the elastic bands do not fasten together, but at a distance. Thus, the master gets a platform, which will be based on the arrow released by the crossbow.

Decor of the crossbow

Special creativity will give a cover of the finished crossbow with a layer of salt dough - then over the cover there is the possibility of applying a relief ornament. Very beautiful will be the product, if the decor will be used beads, rhinestones, beautiful buttons. Of course, in this case, you should let the toy lie down until the dough dries completely.

The dough for coating is fairly easy to make, enough to mix in equal parts by weight fine salt and plain flour (without additives). Gradually adding water to the mixture, the dough should be thoroughly kneaded. Consistency of the mass should resemble a steep dumpling dough.

It is best to let the product dry out in the open air or in a warm place, such as a heating battery. Of course, this will take some time. But after the coating hardens, the master can paint the toy, covering it with paint, paint the product with silver or gold paint, applying a beautiful ornament.

If the decor is produced with the help of plasticine, then it is possible to make a crossbow as much as possible like a real one. However, the decor of the finished product will then not be so stable, and with inaccurate handling it can be subjected to some damages.

Crossbow from the rulers, sticks, old toy bow

Not always at hand, the master can be just four pencils. Then there are other options. For example, a good substitute for pencils can serve as a normal school line. You can fasten them together with glue or even pull them together with a screw and nut.

The difficulty can cause the rubber band to be attached to the boom. The master will need to make cuts at the ends of the ruler, for which the elastic bands will be fastened.

If it is decided to use a sewing gum for starting, then at the ends of the transverse ruler you need to drill holes. In plastic rulers, make holes easily with a heated needle, sewn or knitting needles.

Since you can make a home crossbow not only from pencils or rulers, you can not help remembering other materials. For example, an old bow can also be reincarnated as a new toy. It is enough to perpendicularly attach the school ruler to the middle of the bow or double pencils. Further, the algorithm for manufacturing the crossbow repeats the one described above: the tube is attached, the rubber band is attached to the ends of the bow.

If you make a crossbow in nature, where there are no old toys, rulers, or pencils at hand, then even sticks, carved from twigs, can serve as a material for the toy. The manufacturing algorithm is exactly the same as the master class that describes the work on a crossbow made of pencils and rubber bands.

Safety precautions

Particular attention should be paid to arrows for the crossbow. Best for this purpose, ready arrows with a rubber tip from toy bows will do. Although you can use the used rods from the ballpoint pens. The main thing is to make sure that the guys do not take sharp objects for use as arrows.

You also need to explain to the guys that you can never shoot people and animals in order not to injure them, even if you use pointed objects as arrows: getting into the eye or the temple can be fraught with major troubles.

And explain to children and the fact that it is impossible not only to shoot at living things, but also simply aim at them from any kind of weapon. There is always a chance that the hand will falter and the shot will happen in addition to the desire of the shooter.