HomelinessDo it yourself

How to adjust the cabinet doors by yourself?

If the furniture facades are unevenly in relation to each other, this is striking. To form such problems can for many reasons, so you should know how to adjust the doors of the cabinet Yourself. Displacements of facades are due to such factors as:

  • Relocation of furniture to another place or at the time of the move;
  • Uneven floor effect;
  • High humidity in the room;
  • Due to a long service life.

Before starting to repair furniture, you should pay attention to the moment of the skewing of the doors, maybe they are incorrectly installed. In some cases, the assembly of structures can be carried out in rooms where there is an uneven floor. To do this, we need to compare the diagonals of the cabinet. If they do not match, this means that the design is broken. From this action will depend on how to adjust the doors of the cabinet of any type.

Advice

Before taking any action and thinking about how to adjust the doors of the cabinet, you need to conduct a thorough inspection. Only after the completion of this action will the cause and method of solution be known. If the gaps between the door panels of the cabinet are uneven, this means that the adjustment must be made by adjusting to the right or left. At the time when the facade panels do not close, because they hang much lower or are located above the opening, it is necessary to carry out vertical adjustment. Cabinet door panels can have two types of device:

  • In the opening of the frame;
  • Inside the opening.

Accordingly, the options for fastening, that is, the loops themselves, are different. But the ways of adjusting are not different. Therefore, there is no need to worry about how to adjust the cabinet doors of different types. To carry out repairs, open the front panels and use the adjusting bolts located on the door frame with the frame.

Adjustment of doors

Most people who have encountered violations in the correctness of closing and opening furniture doors, begin to get nervous and panic. As a result, the question arises: "How to adjust the doors of the closet without causing damage to it?". The answer is really simple: you should identify the reason for the defect. Only then should you make any decisions that relate to the repair. At the end of the adjustment process, the appearance of the doors will be much better, they will look symmetrical.

The wardrobe requires a slightly different setting, unlike the usual type of furniture. A pull-out mechanism is placed in the place of the usual fasteners. Due to this, the door leaf extends in the right direction. Adjustment of furniture of this type must be carried out using a special key with six faces.

Adjusting the doors vertically

To determine the reason for the discrepancy between the doors of furniture, you should open them and look at the hinges that act as a mechanism. By screwing and unscrewing the special bolts on the hinges, you can adjust the required height of the sliding panels. To make it easier to determine how to adjust the cabinet door in height, the screws on the side hinges should be weakened. Thanks to this, it becomes possible to expose the doors' facades to the desired level vertically.

After determining the level of height, the screws should be screwed in at low speed, this is necessary in order for the fastening to hold firmly. In the case of reinforced screwing, the hinges will not be held. It is mandatory to know: for fasteners, you should choose only screws with fine threads.

Secrets of adjustment

Before proceeding to practical work on the regulation of doors, it is necessary to familiarize yourself with the basic rules. After all, everyone should know how to properly adjust the doors of the cabinet or any other type of furniture. General information to listen to:

  • The first thing that needs to be done is aligning the doors along the vertical gaps along the entire length of the facade. After that, the height adjustment is carried out.
  • Before performing the adjustment of the cabinet doors, it is necessary to check whether the structure is standing or hanging. This action is performed using a small-sized level.
  • If the level on all sides does not come out, then you should focus on the size of the gaps. The optimum value should not be more than 5 millimeters.
  • Make sure that the door panels are correctly installed. If there are deviations, then using a screwdriver, you can fix them.

If the work sequence is correctly executed, the time interval allocated for regulation will be significantly less.

Adjustment of cabinet facades

Nowadays, for more convenient adjustment, the door panels are equipped with modern mechanisms. With their help to adjust the door of the cabinet from spontaneous opening or skewing can be easily done. Visually, the adjusting bolt is placed slightly away from the fixing screws. The second screw, intended for additional adjustment, is closer to the fastening elements.

In order to perform the full range of adjusting the doors of the cabinet, you need a screwdriver of a figured type and a small amount of patience. The hinges are fixed to the guide with a bolt, and it is held, in turn, on the very frame of the cabinet.

On cabinets like a coupe, the fastening system and the mechanism that allows opening to the facades are significantly different.

Edit Warnings

At the time of the adjustment for the regulation of the cabinet's facades, several things should be remembered:

  • A thorough examination is required.
  • At the time of adjustment, it is necessary to hold the cabinet door so that the mechanism does not move in the opposite direction.
  • Do not overtighten the screws that are located on the mount.

If these actions are difficult for one, then it's better to ask for help, since an extra pair of hands will not be superfluous.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.