AutomobilesCars

How do you light up the car with your own hands? Helpful Tips

At the moment, more and more domestic motorists, including young people, often wonder about toning their iron friend. And there are undeniable advantages in this. First, this tuning allows you to protect the glass from scratches while driving. Secondly, this process positively affects safety - the driver and passengers in the event of an accident will not suffer from debris. Well, finally, tinting the car with your own hands is a beautiful appearance of the car and protection of its interior from prying eyes. In general, to do this tuning in car repair shops are not all, because for such services you will take a decent amount of money. Therefore, the only way out of the situation is to do it yourself. In addition, this process does not require special skills, tools and knowledge. However, here it is worth taking into account a few nuances, which we will talk about today.

How do you light up the car with your own hands? Choosing a quality film

The first thing you need to choose a quality tint. At the moment, car stores are rich in an assortment of similar products, which creates drivers some difficulties in choosing. In general, to choose a quality film is not so difficult. The first thing you should pay attention to is the cost. It is important that toning does not belong to a low price category, since such materials will not last more than a month. It is best to choose goods from the so-called "golden mean". And the second aspect, on which you should focus your attention, is the level of light transmission. Recently, a bill was passed in Russia banning toning that does not meet the requirements of GOST. Therefore, when choosing, be sure to ask the seller if the product meets these requirements.

Preparing the car

Before you make a car yourself, carefully inspect the glass for chips and cracks. If such surface defects are present on your machine, it is best to refrain from such tuning. In the case when the glass does not have such "surprises", you can safely get down to work. First you should thoroughly wash and clean the glass. When detecting greasy stains and stains, be sure to treat them with a wiper or alcohol. When cleaning the glass is recommended to use a rubber spatula.

Getting Started

On the question of where to zamonirovat car, the answer is open. This tuning can be done both in the garage and on the street. The main thing is for the driver to be comfortable. Before you make a car yourself, you need to prepare a certain solution in order to keep the film well on the glass. To do this, take a container with water and add shampoo to it. Keep the proportions: for 1 liter of water should be added about four drops of this product. After that, peel off your tint from the corner of the transparent film and apply a soapy liquid to it evenly with the spray gun. Then you can safely apply ready tuning to the surface. If bubbles occur, remove them with a spatula. Then finish the finished glass with a hair dryer and do not wipe it with water for a week. After the expiration of this period, you can safely wash the film in your pleasure. Now you definitely will not ask yourself: "How do you light up the car with your own hands?"

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.