How can one manufacture claydite-concrete blocks with their own hands?

To build a small building you need a building material, with which you can easily and quickly realize their ideas. For such purposes, durable and modern expanded clay blocks can be used. They are light, well-kept heat and with their help you can quickly build the necessary object. Very few people know, but keramzitobetonnye blocks by own hands it is quite possible to make and in house conditions.

For the actual production of such blocks, sand, water, expanded clay, cement, a vibrating table, a steel plate will be needed. It is not necessary to exert great efforts, the production of this product is rather easy and not burdensome process. Directly the composition of expanded clay itself consists of sand, cement and granules of expanded clay.

First, prepare the following ingredients in the required proportions: three parts of sand, one part of water and one - dry cement, six parts of claydite granules. Add this mixture to the electric concrete mixer in a certain sequence: water, expanded clay, cement. Thus, claydite-concrete blocks with their own hands are now in the initial stage of manufacturing. Stir the solution for several minutes without stopping the process for a minute. The stage of readiness is defined as follows: if the solution is taken into the palm, it must flow out of it.

As can be understood from the above, the production of expanded clay concrete is absolutely not a difficult procedure, only it is worthwhile to closely monitor the sequence of laying the components in the concrete mixer, so as not to disturb the technological process of making the solution.

Further, with the help of a previously prepared shaker we form a block of clay blocks. Place the steel plate in the mold, dropping the prepared mixture. After we turn on the motor of the unit - the upper part of the machine must begin to actively vibrate. This is a necessary process. It is necessary that extra air is released and the composition of the future unit is evenly distributed throughout the product. Do not forget to remove all surplus claydite-concrete solution. Now keramzitobetonnye blocks with their own hands are ready, just need to raise the plate along with the block. Twist the handle of the vibrating table properly - and then the block will be removed.

Now the final stage of manufacturing begins. Soon keramzitobetonnye blocks, with their own hands made, go to dry. In no case take your time and do not remove the steel plates before the due time. Must pass a minimum of about two days before the expanded clay blocks finally dry out. Only after this time you can free up the unit - and only then it will be fully ready for use.

The production of expanded clay blocks at home will help to save the necessary funds. Free money can be spent on interior decoration of the premises or for other construction purposes.