Home and familyAccessories

How can I change the battery in a wristwatch? Everything is very simple!

Wristwatches are an attribute that exists practically in every person. This is not just a useful thing. It is also a stylish decoration, an addition to your image. In a word, an accessory, the purchase of which you do not have to regret. But what to do in the event that you have a battery? How to solve this problem? How to change the battery in a wristwatch yourself, if you do not have this experience? How not to damage the mechanism?

How can I change the battery in a wristwatch? Do you need the help of a master?

So, where to start? As a rule, people are used to referring to specialists. Of course, this is the simplest option. Masters know perfectly how to change the battery in a wristwatch. However, you can manage it yourself. The main thing is to know which battery was installed by the manufacturer. By putting exactly the same, you guarantee the machine a long service life. To look it is necessary on type of a battery. The abbreviation SR says that the battery is silver-zinc. CR - lithium. Such batteries are the most durable. Most often they are used by manufacturers.

Knowing how to change the battery in a wristwatch yourself, you can avoid setting a cheap alkaline model, denoted by the letters LR. Unfortunately, unscrupulous masters sometimes do this. Such batteries do not last long. In addition, they do not keep the tension in the mechanism. As a result, the hours quickly begin to lag.

Remove the back cover

Of course, models with batteries are very convenient. They do not have to start. But the battery is not eternal. Therefore, it has to be changed over time. In this procedure, there is absolutely nothing complicated.

So how do I change the battery in a wristwatch? Everything begins with the removal of the back cover. It can be pressed or twisted. In the first case, a special groove is provided on the lid. There is inserted a small screwdriver. The cover gently snaps and is removed. At this point, the main thing is to hold the watch tightly.

If on the back cover there are several grooves in a circle, it needs to be unscrewed. This is most easily done with a caliper. The tool is inserted into two recesses, and the cover, turning counter-clockwise, is carefully removed.

Change the battery

What next? How to open a wrist watch to change the battery - is clear. After that, you need to find the battery, remember how, and in what position it is fixed. It is important not to confuse the polarity of the installation.

The battery is removed with a small pair of tweezers, and a new one is inserted into its place. The main thing is that it should have the same design and specification as the old one.

When installing the battery, it should not be taken by hand. Use the same tweezers for this. After installation, it is necessary to check if the watch is on. Only after this the lid returns to its place. In a word, nothing complicated.

Put the lid in place

So, the final stage. If the lid is twisting, it must be screwed with a caliper. Do not forget also that if a gasket was installed in the clock, you need to make sure that it has not come into disrepair. Otherwise, it must also be replaced. If you can not find the same exact gasket, you can use a little sealant, applying it to the threaded part.

The pressed lid is put in the clock back on a flat surface. It is necessary to make sure that the groove corresponds to the axis of the sprocket changing the position of the arrows. After this, a small flat object (preferably wooden) is taken, located on the lid and gently pressed down from above. Stand up for its place, it should without any problems.

Thus, knowing all the nuances of how to change the battery in a wristwatch (Casio, Oreintex or any other company), you can easily cope with this task. And most importantly, do it quickly and correctly.

be careful

It's important not to forget about accuracy. If you damage the mechanism, you can already have your watch and not "save" it. For example, by removing the lid, attach it very carefully. The clock should be well fixed, and the tool should be pressed firmly and precisely. By the way, these measures are also necessary in order not to get hurt.

Changing the batteries, remove and insert them as neatly as possible. The tweezers should not touch important elements. In short, caution is needed in everything.

When closing the cover carefully check the tightness of the watch. If you do not close it with your finger, use, for example, a wooden beater used to crush berries, potatoes, etc. So you can press right on the whole surface. As a result, the case will be completed.

However, if you are still not confident in your abilities, you can always easily find a place where you can change the battery in a wristwatch quickly and without problems. Honest good masters are sure to be found in every city.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.