Automobiles, Cars
Heated mirrors by own hands is not a problem
Modern cars are an object of constant improvements. Their technical characteristics are influenced by the discoveries in microelectronics, solid-state physics and even in psychology and human physiology far from automotive engineering .
Thus, for example, the side-view mirrors have recently been applied
All this significantly improves safety and comfort when using the car.
Heated mirrors. His appointment
The purpose of heat supply is certainly clear to all car owners. Removing moisture, leaving the reflective surface clean and dry in the rain or fog, under snow during blizzards - all this provides heating mirrors.
Proceeding from the above, we can conclude that the heating of mirrors Is a means of ensuring traffic safety. For good visibility reduces the time it takes to accurately review and make decisions in a complex traffic situation.
Remember how you had to lower the side windows to wipe the mirror while driving. This created not only inconveniences, but also a danger to life. And what were the "gymnastic" exercises for cleaning mirrors from ice in a frosty morning!
Heated mirrors universal removes us from problems with poor viewing. It is enough to press the button, and, while the machine is warming up, frost and frost will come off the mirror. This will happen due to the electric current from the on-board system, which will heat the mirror to 50 ° C. The ice melts under the influence of heat, and the moisture evaporates immediately.
How to make mirrors heated by yourself
But such auto-heating mirrors appeared in everyday life relatively recently, so many car owners of earlier releases were left without a comfortable innovation. It does not matter. Heated mirrors can be done by yourself.
You will need a 12-volt light bulb from those that are inserted into the tail lights
In the disassembled mirror it is necessary to heat a plastic casing with heat-resistant material. It can be cardboard, textolite, and paronite. Then the light bulb is arranged inside, but so that it does not touch the glass, otherwise it will lead to cracks and deterioration of the reflective layer. At the bottom of the casing we make a hole for the wiring and take it out into the interior through the door. If it is not possible to install a lamp holder, the wires can be soldered to the contacts in the socket. Do not forget about isolation!
You will find that your upgraded mirror thaws in just 3 minutes. However, it is not recommended to keep the bulb permanently on, because plastic parts can start to melt. But in this case you will be rescued by a double-headed lamp (21 and 5 W). Here you can use one thread to melt the ice, and the other - to maintain the necessary heat.
Safe way to you!
Similar articles
Trending Now