Goats for sawing wood with their own hands: drawing, manufacturing and dimensions

Cutting large quantities of firewood is a time consuming task. Everyone who has ever done this, certainly knows that doing it on the ground or in a semi-suspension is not very convenient. To put it bluntly, after a few bars, this activity starts to terribly annoy. Nevertheless, there are goats for sawing wood, which can greatly simplify the task and make the work performed less laborious and faster.

All ingenious is simple

By itself, the goat is a simple enough design, and it can be made even by someone who has never done such things. Moreover, at present there are several manufacturing options, each of which is suitable for certain cases. Goats can be made of wood or metal. In the first case, the construction is very light, and its strength is limited. At the same time to create it you do not need anything, except boards, nails, screws and a few simple tools. The metal goat is much stronger and more durable, but it takes more resources and resources to make it. In either case, there is a first and a second option.

Materials and Tools

Before you start the work, you need to acquire materials and tools. First let's look at how to create a wooden goat. To do this, you need a bar section of 100x100 and a length of 110 centimeters under the base. For "horns" and "legs" take a bar section of 50x50 length of 36 and 110 centimeters respectively. It is also desirable to take care of the amplifiers of the "legs" that will give stability. This will require an inch board. It is advisable to take two, each - 130 cm.

As for the instrument, it will take a little, and it will be found for everyone. To perform the work you need a hammer, a chisel, and a hacksaw. You will have to buy 25-35 screws, if, of course, you do not have them. In addition to all this, it is advisable to have a construction corner with a pencil, which will allow you to perform the job more accurately. You can not do without a screwdriver, although a screwdriver is more preferable.

General Provisions

A wooden goat for firewood should be lightweight, comfortable and durable. It is extremely important to understand that the construction must be adjusted to its own growth. But let's take a closer look at this issue and find out how to make the goats for a sawmill with your own hands. Drawing in this case, or at least a sketch, will be the one that will help to perform all the work more accurately and quickly.

The cutting height in most cases should not exceed 110 centimeters and be less than 90 cm. So a person does not need to squat or tilt the body too much. If you plan to use a two-handed saw, care must be taken to rest your free hand. In this case, the machine is placed an additional cut wood, which acts as an abutment. But if you are going to work with a chainsaw, then the emphasis will be meaningless, which is due to the employment of both hands. When working with a gasoline or power tool, it is much more important to take care of the maximum reach of the log from the goat. So the workpiece will not be clamped, which is almost inevitable when performing sawing between the legs of the goat.

Goats for sawing wood by own hands

The machine must be assembled from the feet. Although there are many options, this is considered the most optimal and simple. In the bars of the crosspiece, where the place of the future joint is located, grooves are made for a more secure fit. Next, the struts are stacked on top of each other and fastened with self-tapping screws. The clamping beam must also have several grooves, in the future it must be carefully nailed to the structure. Cut the cuts with a chisel and a hammer. Do not forget also that the grooves should be several millimeters already, rather than inserted into them a bar. This will create a connection with an interference that will be strong enough and reliable.

On inch bars there is a marking, in the places of which there will be amplifiers. They are needed to ensure the stability of the legs. In principle, goats for sawing wood with their own hands are made quite quickly, but it is extremely important to make all connections qualitative, so do not feel sorry for the screws.

For sawing with a two-handed saw

It is worth noting that the design of such a machine will be different, albeit slightly, but all changes are simply necessary. For example, here it is unacceptable to use narrow goats, since variable effort during the execution of work will lead to overturning. X-shaped racks make sense to make of a thick and durable bar section of 100 mm. In addition, the screed is recommended to be made of metal. This approach will allow you to maximally fix the goats, so they do not loosen during the work. The drawing of the goats for a saw blade with a two-handed saw means the widening of the lower part of the support. It should be more by 100-150 mm than the distance from the surface to the top of the beam. If you used a wooden, rather than a metal screed, then strengthen the structure additionally with a thin bar. In other respects, the dimensions remain the same, and only the lower part of the support is subjected to changes. If the last element is made in the standard version, then the emphasis is on the free hand.

Chainsaw for sawmill saws

Chainsaw is a relatively inexpensive, but at the same time, effective automatic tool for sawing wood. At first there were no goats made especially for this type of equipment, but today they are. The classical X-shaped design is bad in that there is a high probability of wedging the chain during the execution of the saw. It is for this reason that goats are very popular, allowing the free-running of the blade. Most often used metal structures, which will improve. Modernization consists in installing a toothed clamp on one of the ends, which allows the workpiece to be firmly fixed. Currently, universal devices are available for sale, which have a high-quality clamp, and completely eliminate the ricochet during the work. True, the price for such machines starts from 8000 rubles. That's why it makes sense to start making this goat yourself.

Metal Goat: Features and Benefits

The main advantages of metal goats are their resource. This is a more durable and durable product that will certainly serve you well. In this case, you will need a metal profile with a section of 50x50 mm, as well as a Bulgarian and bolts or a welding machine. It is desirable to have a pre-prepared drawing and a sketch with the sizes applied. By size, the base beams are cut off, the joints are marked and the steel elements of the machine are cut. In this case, you can choose any method of connection: both bolted and welded. The latter option is more durable, but you will have to work harder than in the first case. Currently, metal goats for sawing firewood are found in a multivariate version. You can find machines of various heights, widths, strengths, etc.

Conclusion

So we figured out in general terms how to make different goats for sawing wood. Sizes should be selected depending on your height. In any case, the work should be comfortable. You can always ennoble the goats. Usually this is achieved by using a metal profile instead of a wooden beam for the legs, using narrow boards instead of a log. Here, in principle, and all on this topic. Manufacture of machine tools with their own hands is good because virtually no financial investments are required. In any case, the costs will be incomparable with the market prices for finished goats. In addition, you will receive a precious experience that you can use in the future. But remember that at all stages of the design you need to provide it with strength and reliability.