Feeder rod - how to choose? Feeder Rod Assembly

If the fisherman feels the desire to switch to other ways of catching, the feeder rod will be a good solution to this question. However, in order to choose a convenient, high-quality tackle, there are several ways. You can pick up the rod, relying on the advice of friends, sellers of specialized stores or printed sources. There is no universal tackle, ideal for everyone. Therefore, you should pay attention to expert advice, as well as feedback on the current feeder rods.

Where to use the feeder

When choosing a fishing rod, you should determine in what conditions the tackle will be used. To understand how to choose a fishing rod, you should pay attention to the area where you plan to fish. If this is a small river, the distance from the coast to the shore does not exceed 100 m, then it is worth considering whether it is necessary to use a long-length feeder rod in these conditions. This can become a hindrance in such conditions. Here, more likely, the picker will approach.

In addition, if there is a large number of shrubs growing on the shore, trees that hang over the water itself, then you should also use the tackle shorter. Otherwise catching feeder in such conditions will not bring any pleasure. Hooks and leashes will be tangled in the branches, which will lead to their breakage.

Therefore, when choosing a fishing rod, you should use long tackles in the open area. It is better if the river is medium or wide.

Rod Test

The feeder rod has the recommended weight of lures as a test, which will be used in the fishing process. This indicator is indicated on the case of the product and has two digits. They talk about the minimum and maximum test score. The basis for specifying such a range is the weight of the trough.

The test value can be given in grams or ligrams. 1 lbs is equal to 327.45 g.

The more the mass of the feeder and the longer the rod, the farther you can throw the tackle without using special efforts. Therefore, the length of the rod for feeder fishing should correspond to the length of the reservoir.

The weight of the trough should be the greater, the stronger the flow. Rods-spinning should be selected with such a test, so that the feeder could remain in place of its casting and not shift during fishing.

Feeder rod classes

There are only 5 classes of feeder fishing rods that are associated with their device, length and test.

The first class has the name of ultra-light and has a form of tackle 3 m, and the test range is 10-40 g. This type is also called the picker. It is designed for ponds without flow. The picker is suitable for running without long-distance casting.

The light class belongs to rods with a length of 3 to 3.6 m and a test of 60 g. They are used for ponds with a small current.

Universal rod-spinnings of the medium class are considered universal. They provide good sensitivity in both standing and moving water. Their length is up to 3.6 m, and the test is 60-100 g.

The Heavy Feeder is designed for a 100-200 g. Feeder. Its length reaches 4 m. This tackle will allow drawing large enough fish out of the water.

Extra heavy feeder is able to withstand the feeder from 120 g and above. The length of the rod reaches 5 m. They will allow you to fish with even very strong currents.

Rod design

The indicator of the system makes it clear what flexibility the form of tackle has, how it flexes under load. To understand how to choose a fishing rod, you should pay attention to this indicator.

Rapid system testifies to the rigidity of tackles when casting. When you swing the feeder will fly faster, sharply.

The slow system belongs to more flexible rods. When casting the form with acceleration is straightened.

Experienced fishermen argue that a hard (fast) system allows you to make more accurate casts. The tip of the blank does not bend and does not lubricate the direction of the throw.

The average system is an intermediate state between its fast and slow types. It will allow you to correct many errors when casting. Therefore, it is ideal for beginners. After such a system it will be easier to determine which type of rigidity will be more convenient for a fisherman.

The slow formation (slow) bends the blank on all its rings. It allows you to quench jerks of large fish in the process of catching.

Rod Material

Rod for feeder fishing can be made of different materials.

The most expensive is a form of high-modulus graphite. This material is used by such manufacturers as Salmo Diamond, Taifun, Daiwa, Aqua Tornado and others. This is a strong and at the same time light rod type. Its disadvantage is the sensitivity to damage, so handle this form carefully.

Rods made of composite are somewhat cheaper. They are unpretentious, but they have more weight than the previous version. These products include the brands of Trabucco, Shimano, Ultraviolet and others.

Fiberglass forms are characterized as rather heavy and rigid products that are not afraid of mechanical influences. This is the cheapest option. The most famous manufacturers of such gear are Kosadaka, Mikado and others.

Form design

There is a plug and telescopic feeder rod. Feedback from users about which type is best, divided. Some fishermen prefer the compactness of the telescopic blank. Others are a multi-part version with plug-in connections.

As a rule, the rod has more access rings. This allows you to distribute the load evenly over the entire rod.

According to the fishermen, the feeder rod with the telescopic blank is somewhat inferior to this indicator of the plug-in version. The transmission rings are located one at the end of each section. Feeder fishing with such a tackle is less convenient, especially when pulling out a fairly large fish from the water. Therefore, when choosing a suitable rod, it is worth paying attention to the number of rings on the blank.

Running rings

The rings of each fishing rod are designed to use a certain type of gear. This can be a braided cord or fishing line. Applying an unsuitable type of material, you can damage the rings. Casts will be inaccurate, the fishing process will become heavy and uncomfortable.

To use the cord, the rings must have special inserts. As a rule, they do not possess cheap rods. Even for the same manufacturer, each series can be designed for different types of gear. So, for example, the Shimano rod of the Nexave AX series is equipped with friction rings protection, and the Beast Master series has no special ring protection.

In the manufacture of inserts for access rings, metal ceramics with the deposition of silicon carbide, titanium nitride, alumina or porcelain are most often used.

Feeder tops

Quite often the cause of breakage of the rod is a fracture of the top. This can happen with an accidental impact on the rocks, trees, when overlapping the tulip.

When buying a feeder, pay attention to the diameter of the base of the top. It is in the range from 2.2 to 3.5 mm.

The material from which the top is made is also important. The design of the feeder rod assumes the production of this element from fiberglass, carbon fiber or carbon fiber. For each of them there is a test of the form.

It is better to choose those vertices that have a digital marking. Their error is much lower. The test range can be stated in grams or ounces (1 oz is equal to 28.35 g). It is better if the manufacturer includes additional vertices in the kit with the fishing rod.

Reviews of fishermen about cheap feeders

Cheap fiberglass fishing rods are products from fiberglass. This is most often Chinese products. The most famous brands of such products are Mikado, Kosadaka and others.

The Chinese manufacturer Kosadaka is known for the series of gears Millennium Feeder. This is a solid, heavy and rather unpretentious feeder rod. Reviews of fishermen distinguish it as an optimal tackle in the ratio of price / quality. They are designed for catching in a fast flow. According to the five-point system, the fishermen gave the presented product an estimate of 4.45.

The brand Mikado produces products of several series. Sensei Light Feeder is tough enough, but it's an easy option for catching in a small and medium flow. It is estimated by fishermen at 4.33. For a strong current, this manufacturer produced a series of SCR Heavi Feeder. She is given an assessment by users of 5 points. These are quite good options for a low-price segment.

Reviews of medium-cost feeders

In the mid-price segment in the market of fishing gear are presented quite qualitative options. The Shimano Trabucco and other products were evaluated by fishermen on a five-point system.

The Shimano brand is known as the manufacturer of such series as Beast Master Feeder L (Fisherman Evaluation 4,9), Speed Master XH Feeder (score 5), Nexave BX Feeder (score 5). This manufacturer has established itself as a responsible supplier of quality products. Full equipment, application of various advanced technologies make the application of such products comfortable, and the service life is long-lasting.

Feeder rod Trabucco series NEOX PW Feeder is estimated by fishermen at 5+. Technologies, applied by the manufacturer in the presented model, allow maximizing the service life of the product.

Reviews of expensive feeder fishing rods

Among the high-price segments evaluated by fishermen, feeder products of such producers as Aqua Tornado, Daiwa, Taifun, Salmo Diamond, Elite Alliance.

In this segment, fishermen rated for only 5 fishing rods Daiwa Vulkan X Leger. According to users, this product is completely in line with its price.

The rest of the products, according to fishermen, do not justify their value. Taifun Feeder (score 4.6), Salmo Diamond Feeder (score 4), Aqua Tornado (score 4.9), Elite Alliance (score 4.96), according to users, are not long enough. These are sensitive to mechanical damage products, which should be treated with extreme care, not allowing sand to enter the joint sections of the form.

Feeder self-feed

To independently assemble the feeder rod, attention should be paid to the rigging. Improperly assembled tackle can cause failure when catching fish.

The equipment should be sensitive to biting. There are several ways how to collect a feeder rod, starting with its components, with your own hands.

Paternoster is one of the simplest and most popular species. On the main line make two loops, one at its end, and the second - at a distance of 15 cm from the first. At the end of the assembly, fasten the leash using the "loop to loop" method. The second feeder is attached to the second knot.

There are other ways to make feeder gear yourself. Each fisherman chooses the most convenient option for himself.

How to make a feeder rod

Not wanting to buy a ready-made feeder rod, you can assemble it yourself. To do this, they acquire all the necessary components separately and collect them on the pond after preparing the bait.

There is a certain sequence of actions. So how do you make a feeder rod yourself?

The rod is assembled so that the rings are on the same line. Then the coil is mounted to the space allocated for it on the letterhead.

The line should be stretched through all the rings on the body of the product. It should not have nodes or torsion bars. To the main line is fastened the feeder equipment. It can be done at home or directly on a pond.

Then you need to attach the feeder. Feeder fishing at this stage implies the beginning of feeding the fish. After this, a leash with hooks is attached to the main line or snap.

If fishing is carried out in a quiet pond where the fish are rather shy, the feeder after the bait should be replaced with a quieter weight. For long-distance casting, the feeder must be used without fail. Its shape and weight are also selected in accordance with the type of pond, the presence of the current, and the estimated size of the fish.

The thinner the rigging, the more sensitive it reacts to touching the bait. The luck of the whole fishing depends on this. Correctly selected elements of the fishing rod significantly increase the chances of the fisherman's success.

Having become acquainted with the variety of such tackle, as a feeder rod, you can choose the right option for yourself. Based on the reviews of fishermen who tested such devices, we can conclude that the quality of the products of producers. If desired, it is allowed to assemble the feeder rod independently, acquiring its component parts separately. Properly selected gear will provide all chances for a successful process of catching fish and will give a lot of positive emotions and a good mood to the fisherman regardless of the type of pond.