In most cases, during construction or repair, the owner decides to perform such a process as the lining with the lining, with his own hands, because this material has proved to be excellent in finishing vertical surfaces. In addition, there is no difficulty in self-decoration. However, the products are made from different wood, so for a specific purpose you need to purchase a suitable product. For office and residential premises are perfectly suitable coniferous wood. If the vagonka is nailed in the bath with your own hands, then it is better to choose aspen material. Nowadays, the EuroLock, which imitates all kinds of surfaces, is popular.
When it is assumed that the cladding is done by hand, the choice of its appearance arises. Recently, imitation of a log or a beam has become widespread. In the first case, it seems that after the skin is a chopped house. The outer side of the product has a semicircular shape, which is why the building seems log-like. In another case, the wall becomes like a log. Wide panels of such simulations are most often used for exterior decoration. Particularly useful are listed products in frame house construction.
Before proceeding to such an occupation as the lining of the lining with one's own hands, all the elements must be treated with protective compounds, especially since certain types of wood can very much need it. Otherwise, after a while, the skin will dry out even from insignificant moisture and will lose its original color. Sometimes additional operations are also performed to help improve the appearance of the coating. Such a procedure, for example, can be wood demineralization, involving the removal of resin and the removal of greasy stains. The most elementary way is to lubricate the boards with a solution of acetone followed by a flush.
Before the cladding can be done by hand, the questions about the electricity in the room must be completely resolved. That is, all points of the location of sockets, various lamps, switches and flaps should be clearly defined. It is best to put wires under a wooden trim. Metal pipes are suitable for insulation, and cables with a large cross section will have to be purchased to protect against overheating. If the wall is flat enough, then the lining can be fastened directly to it. However, for brick or stone walls it will be necessary to arrange a preliminary crate.
The supporting structure is also necessary in the event that the loggia is finished with a lining by own hands. There are several ways to fix the material to the slats. Where aesthetics are not particularly important, fixation is performed in any part of the board. Of course, large nails will not work, as the risk of splitting a wooden panel is likely . Another way involves fastening directly into the grooves when the hats are closed by the next board. Fixing with self-tapping screws is carried out in the same way. Fixing elements are screwed into the spike of the first lining, after which the next panel is installed.