Sports and Fitness, Equipment
Bicycle carrier on the car. Roof racks for bicycles
Many motorists prefer to completely give themselves to riding a bicycle, only being out of town. This option allows plenty to roll in safe conditions. In this case, it is not necessary to avoid the driver-drivers or pay attention to restrictions for movement.
Ensure the delivery of the bike to the destination in full safety allow special trunks on the roof of the car for a bicycle.
Types
Currently, the following options are available to motorists:
- Bicycle luggage carriers on the roof of the car;
- Design to secure the bike in the rear door area of four-wheeled vehicles;
- Bicycle luggage carriers.
Each of these solutions has its advantages and disadvantages, which should be discussed in more detail.
Roof racks for bicycles
What are the advantages of a bicycle carrier on the roof of a car? Reviews of motorists who already have experience in the operation of similar products, make it possible to distinguish:
- Affordable cost;
- Ease of handling;
- Low susceptibility to pollution.
Among the disadvantages that trunks on the roof of a car for a bicycle differ, it is possible to note: inconvenience of loading of bikes for undersized people, deterioration of aerodynamic parameters during movement, and also necessity of presence of special рейлингов for fastening of a design.
Fasteners on the back door
The main advantages of this solution is the reduction of air resistance during driving, the convenience of loading bikes. The only drawback is the reduced visibility in the rearview mirror.
Trunk to Trunk
Luggage racks for transporting bicycles on the towbar are convenient for loading. Another advantage here is the presence of parking lights, stops and turns. As for the minuses of trunks on the hitch, then to these can be attributed a high cost.
Bike carrier on the roof of the car with your own hands
If you want, the availability of funds and materials to make a bicycle carrier with your own hand is not so difficult. Let's look at how to assemble a structure to transport a bike on the roof of the car.
To make a bike carrier you will need the following:
- metallic profile;
- Strong tubes (preference is given to products made of steel);
- Thin sheet metal;
- Fasteners;
- Paint and varnish materials for the final processing of the structure;
- welding machine;
- Tools for working on metal.
To begin with, the metal profile curves in the shape of the letter "P". Vicators can cope with the task. Further the edges of the tubes are twisted. In the crushed places with a drill for metal holes for fasteners are made.
At the next stage in the prepared profile a pair of notches is cut out, where later the bicycle wheels will be placed.
After completion of the above work, you can go directly to the installation of the trunk. Pre-curved metal sheet is screwed with fasteners to the car's luggage structure. The profile is laid on top, after which, at an angle of 60 ° in the direction of the bonnet, the tubes with the flattened ends are screwed. The latter will hold the bike in a stationary position.
The above recommendations make it possible to produce quite decent trunks on the roof of a car for a bicycle, which will become a reliable vehicle for the transportation of a bike.
Operating Tips
It is advisable not to leave the bike fixed on the trunk when stopping during transportation. Remove it from the fastenings is quite simple. Even the most proven systems are not able to protect against such cases.
When transporting a bicycle it is advisable to comply with speed limits, avoid sudden acceleration and braking. Driving at an impressive speed creates an additional load on the mounts and increases the likelihood of their damage.
If the bicycle is installed on the towbar of the car, it is necessary to be careful when parking and moving back.
Finally
Similar articles
Trending Now