Than to seal an inflatable mattress independently

Many people, having in their household a leaky inflatable product, do not even suspect that it is subject to repair, and therefore do not know how to seal an inflatable mattress. Complaints about the fact that over time he began to bleed the air, are not uncommon. As a result, people, after finding a hole, just throw out the mattress. Today there are several options and ways to repair. Let us dwell on one of them in more detail.

To begin with, we'll figure out what can be covered with an air mattress. In the shops that sell auto / bicycle parts, there are special repair kits. They include latches, glue and sandpaper for stripping.

Before you seal the air mattress, you need to find a place in which it is damaged. To do this, place it lightly puffed into a bath of water. Slowly pressing on the mattress, carefully monitor the appearance of bubbles. This procedure will help to easily locate the damage. In order not to lose the hole found, it is better to designate it using a chalk or a marker.

After the hole is found, dry the mattress well, wiping it with a dry towel, and degrease the surface near the damage. To do this, use alcohol or vodka, and preferably a solvent. Cut out the size of the board that corresponds to the damage. As a patch tape is used, which is in the repair kit.

Many are also tormented over the question of how to seal an inflatable mattress, and, as a result, the first thing that comes across a kind hand is superglue. Use it for such purposes is strictly prohibited, since it contains cyanoacrylate, which will not withstand pressure and soon a new hole will appear in the old place.

In such cases, it is better to use rubber-based glue. It has elastic properties that will not allow the seam to disperse. As a rule, its value is more, but it is a justified purchase. On the surface of the tube it is indicated whether it is possible to glue the air mattress with this glue and what materials it generally glues together.

Apply gluing agent should be only one part, better directly to the area of damage. After that, it should be spread over the surface with a brush. Then you should wait until the glue dries, and apply another layer.

Now it remains only to press the patch against the mattress so that there are no air bubbles between them. For this it is necessary to lay two parts on top of each other and put some weight on top. As a cargo, you can also use upholstered furniture by placing a mattress under the foot of the sofa or beds. In this case, it must be put on a piece of cellophane, which will prevent the glue from getting on the carpet or floor.

The procedure itself is carried out quite quickly, as the glue dries up instantly. The mattress thus repaired is capable of withstanding the same loads as the new one.

With the help of simple manipulations that take a little time, you can now independently repair any inflatable product. The question of how and how to seal an air mattress will no longer arise.