Replacing the matrix on a laptop. Replacing the matrix notebook Asus

When a screen break occurs, many users enter their laptop into the service center, and some just buy a new device. The replacement of the matrix on the laptop from specialists can be very expensive, although in 90% of cases the display of the device can be seen independently, thus saving a considerable amount. If you want to save money, and it certainly is present, then we recommend that you familiarize yourself with the proposed instruction.

Where to begin

So, if you need to replace the screen on a laptop, then, accordingly, you need to purchase a new display that belongs to your device. Pay enough attention to the choice of a new item, since if you buy a screen not from your device, then there is a high probability that it simply will not work, and it will not work. Replacement of the matrix on the laptop should take place at a clean desk, remember that you need a lot of space. Also, in addition to the new display, you will need a Phillips screwdriver, which will be used to parse the device.

The scheme

Replacing the matrix of the laptop Asus or another will happen almost identically, and therefore we will give a general instruction. First of all, as we mentioned above, you will need to purchase a new display. If you want to eventually get a screen with higher characteristics, in this case you can refer to specialists who will help you find the part.

Replacing the matrix notebook Lenovo can be made as quickly as possible. In the event that you live in a large city, you can easily pick up the display and install it. If you do not have the opportunity to go to a specialized service and purchase the necessary component, then you can make a direct order for a new display using the Internet. The screen can also be found in stores, just before making an order, you should make sure that the selected display is exactly right for your laptop. In order not to be mistaken, you can simply visit the developer's site, where you will find all the characteristics of your device, including which screen was installed.

What to give preference to

If you do not have full confidence that the selected display with the best characteristics is suitable for your device and after the matrix is replaced on the laptop it can work correctly, then it is better to choose a screen identical to what was installed in your device. Also, you need to pay special attention to the manufacturer of the display, since even seemingly identical models can be equipped with different microcircuits. Make sure that the screen has the necessary type of backlighting, or rather, it can be LED or CCFL. Replacing the matrix notebook Acer requires special attention, and this in any case should not be forgotten.

Repairs

Now we need to move on to the question of how to replace the display. In most cases, a complete disassembly of the device is not required, although in some situations this may still be required. The first thing to do is to properly position the device so that you can work comfortably, and then you need to remove the rubber gaskets that are designed to prevent the laptop from colliding with the bottom of the screen. Replacing the Asus laptop matrix should take place in a well-lit room, so if there is not enough light, we recommend installing a table lamp.

The work should be started only after the device is completely de-energized, so turn it off and disconnect the wire from the mains. After the rubber gaskets are removed, you will be able to see the screws that are designed to fix the case and the display. Screws carefully unscrewed with a Phillips screwdriver and add them in one place. In some models of mobile PCs, additional fastening screws can also be placed. If they are present, then you can find these items in the bottom corner of the case.

The final

Now you face the most difficult and painstaking task, or rather, you need to remove the outer frame. After that carefully remove the non-working display. Next, you will see two or three loops that go to the screen from the bottom of the device, you will also need to disconnect them. Do not pull out these elements at all, as you can damage them and, consequently, you will be able to solve the problem only in a specialized service. After completely removing the old display, you need to postpone it and start connecting a new one. Replacing the matrix on a laptop does not take much time, but in order to get a positive result, you need to act very carefully and slowly.