Home and family, Accessories
Malfunctions of the refrigerator "Atlant": the main types
Despite the excellent quality of the refrigerators of the Belarusian manufacturer, any owner of this purchase can face a problem of breakage or malfunction.
- 1. Malfunction of the thermostat (in this case the compressor stops its operation, but the lamps and indicators of the network function in the usual mode).
- 2. Failure in the operation of the electronic control unit (this may lead to the failure of the starting relay, and sometimes even the motor-compressor). Causes of failure are the following: a short circuit in the network, high ambient temperature, alcohol or water ingress, illiterate operation. Repair of the refrigerator "Atlant" in this case can be very difficult, so you should invite the master.
- Failure in the basic mechanisms of the unit, which will need to replace the original spare parts.
- Breakdown of the compressor (the refrigerator can start to work with insufficiently low temperature, it is difficult to freeze or completely stop its work, it may be that there is no buzz or a violation of the cyclic operation). Malfunctions of the refrigerator "Atlant" of this kind are easily eliminated by replacing the compressor.
- Failure of fasteners, which connect the refrigerator door and the refrigerator itself, or internal shelves with each other.
- Clogged drainage tube (in this case, water accumulates in the cooling chamber). It is a minor malfunction, but also requires repair.
- Clogged capillary tube (this will result in high temperature in the freezer or continuous operation of the refrigerator).
- In the refrigerator with sound alarm can break the alarm switch. These faults are eliminated very easily. A replacement is made for the failed unit.
This is the main malfunction of the refrigerator Atlant. When buying an aggregate it is important to pay attention to the fact that it has its own distinctive features in operation. For example, the refrigerant noise is not a malfunction if it does not exceed the specified limit. The noise level (in decibels) can be determined by a specially used instrument. This feature is often eliminated by the correct installation of the refrigerator by level. Sometimes there is not enough low temperature in the freezer. This may be due not only to weak sealing rubber bands, which can be replaced by yourself, but also with an incorrectly installed mode.
Similar articles
Trending Now