How to make a fountain of stones with your own hands

You can make a beautiful fountain at your dacha or private plot, which will delight you with your presence, performing a number of functions. It can be made of stones, which will ensure not only decorativeness, but also the simplicity of its creation. So, when answering the question about how to make a fountain with your own hands, you should consider all the stages of the work.

The entire structure consists of the following parts: water circulating with a pump that provides all the work; A beautiful sculpture that will be washed by water. As the last element can serve any object that will not break down and deteriorate under the influence of water. If we talk about how to make a fountain with our own hands, it is important to note that the system will look the same regardless of what materials you will use.

Work should begin with a water tank buried in the ground, and it will feed the fountain. It is laid mesh, which serves as a protection and a filter against the ingress of foreign objects, and even higher is the base of the fountain, which will also serve as a support so that the entire structure does not fall into the tank. Submersible pump performs the function of the heart of the fountain. It must be placed in the water in the tank, so that it pumps water for the fountain. Since its power supply provides an electrical network, it is necessary to provide access to it. In addition, the fountain in the country house, built with his own hands , should be able to be serviced. This requires making a base of this size so that it is possible to remove the pump if necessary.

If we continue to understand how to make a fountain with our own hands, then it should be noted that the tank can be masked from above with mulch or stones. A pipe that supplies water to the top should have a valve that will regulate the water flow of the fountain.

The pit for the tank should be 5 centimeters deeper than its height. In addition, it is necessary to dig a groove to the electrical network for the cord. The bottom of the pit will need to pour 5 centimeters of rubble, and then install the tank. In the groove, a plastic pipe must be laid so that the wire is securely protected. The power cord should be pulled through the pipe, and then insulated its ends. The pipe with the cord should be placed in the groove, and then fall asleep.

Talking about how to make a fountain, you can go to the next stage of the work. The submersible pump must be installed in the middle of the tank. On top of it, you need to place a mesh, which should have cutouts for the cord and fountain. Now you can cut a 10-centimeter metal-plastic or copper pipe to fix it to the pump. At the second end of the pipe, the ball valve should be fixed. At the top of the tap should be a piece of pipe - a little larger, to form the fountain itself.

Stones should be folded as you like, then drill a hole for the fountain pipe in them. Then the stones must be planted on the pipe. The reservoir can be filled with water, which should cover the top of the pump by 10-12 centimeters. Open the ball valve, and then turn the pump on the mains, it only remains to adjust the flow strength. This is all about the question of how to make a fountain with your own hands.