How much does a printer for a computer cost? How much does a 3D printer cost?

For many users of a personal computer the printer has ceased to be a luxury, and has become a matter of prime necessity. This concerns not only schoolchildren and students, but also people who work at home. And in general it is useful to have at hand a device with which you can print everything and everything. And, of course, many are wondering about the cost of a printer with various useful functions.

Types and types

The price issue in most cases is of great importance when buying, as well as functional devices. Conventionally, all types of printers can be divided into several large categories:

• Only printers;
• Printer and scanner (2 in 1);
• MFP (multifunction device).

In this case, each of them differs by the method of printing: laser or inkjet. Disputes about which is better - mass. The truth is one - it all depends on the purpose for which the device is printed. Asking about the cost of the printer, pay attention to your needs, and then look for it!

Inkjet printing

Perhaps, this is a well-known method of printing, which still does not give up its positions. What is its advantage? First, in the low cost of the device. How much does an inkjet printer cost? The simplest models, without additional, often unnecessary functions - within 700-1500 rubles. Secondly, specialists note that color inkjet printing differs in brightness and color saturation in comparison with laser devices. But, of course, not without a spoonful of tar - in this case it's the cost of consumables. Often, a replaceable cartridge is more expensive than the printer itself. Especially it concerns such eminent firm-manufacturers, as "Samsung", "Canon", "Epson". Their main "chip" is a special chip, which significantly complicates the selection of a replacement, more budgetary cartridge.

How to save money?

Fortunately, savvy and handy Chinese have come up with a way to save money on inkjet printers, or rather, on consumables. Chinese manufacturers have created such a device as CISS. This is a continuous ink supply system. What is its advantage? It controls the amount of ink, allowing the paint to be used evenly and economically, maintaining normal and equal pressure. What is it? A small bag that is divided into several sections. Depending on what kind of printing device you have, the cost of CISS also varies. Usually it does not go beyond 1000 rubles. How much does a printer for a computer with CISS? You can easily keep within 2000 rubles. At the same time, the cost of printing will be only a few cents per sheet or photo.

Laser printers

These devices have been widely used relatively recently, but already had their grateful fans. What is the advantage of laser printers?

• First, economical printing. For example, a monochrome laser printer can print up to 2000 A4 sheets before the cartridge runs out.
• Secondly, consumables fall into the budget category.
• Thirdly, printers practically do not wear out and do not break. They do not have any elements inside that move, which means they wear out the device.

How much does a laser printer cost? Here everything depends on which category it belongs to. For example, a black and white device can cost 1,500 rubles, and the same model, but already a color one - in the amount of about 2500-3000 rubles. And, of course, photo printers will cost a little more, and the MFPs are generally much higher. A multifunctional device with a laser printing system falls into the price category from 5000 rubles. Although there are exceptions. It all depends on the company and the country of origin.

3D technology

Among these devices appeared and a miracle, like a 3D printer. What is he like? This device, which allows you to create three-dimensional models. For home use, this type of printer is little needed, unless its owner is an aircraft designer, for example. By the way, it is in the field of design that this device has been widely used. In recent years, doctors are also actively looking to it - for example, to create a prototype of prostheses. How much does a 3D printer cost? Here everything depends on the model and the manufacturer. At the moment it's not so easy to find a device in the price category up to $ 1000, but they are. Although for home use is not quite suitable, because they take up a lot of space. Usually these are large floor cars, with a few exceptions, of course.

Printrbot jr 3D-Printer

At the moment this is the most affordable and affordable model. How much does a 3D printer cost? It falls into the price category: from 20 000 to 30 000 rubles. Professionals refer it to amateur devices, which copes with its functions: creating preset models. For example, the buttons to the remote control.

3D Printer UP Mini

What is remarkable about this model? The fact that it, first, desktop. That is, it does not take up much space. Secondly, it has a closed case, which not every 3D printer can boast of. It is also remarkable that it can be used at home. For example, for the work of a designer, an architect or a research assistant. How much does a 3D printer of this company cost? Price category - from 35 000 to 45 000 rubles, depending on the store-seller. And yes, it's color printing! Now created models have their own color, which is very convenient and relevant. Not to mention that the inkjet printing method for 3D printers is the only possible option for normal operation.

MFP for Home

Often there is a need not just to print the document, but also to scan some papers. That's why there are MFPs that combine both a printer, a scanner, and a photo printer, and also have a number of additional functions - for example, a Wi-Fi communication module and card readers. You no longer need to connect the device to a computer for printing, for example, photos from your phone. A slot for the memory card helps to accomplish the task in a few touches. How much is a color printer with all these benefits? Not so expensive! For the house you can choose a model in the category from 3000 rubles. For example, the company "Epson" has in the line of their MFPs such. Epson Expression Premium XP-600 is a multifunctional device with inkjet type of printing, with 5 cartridges. The photos have never been so bright and juicy! Carefully be not only interested in the way of printing, functionality, but also in consumables. The cheaper they are, the cheaper the cost of printing, which means that it's more profitable to buy.

Instead of output

Thinking about how much a printer costs for a home, first ask yourself what you want: a simple device for printing documents or a powerful machine for work and entertainment? Essentially the price category does not differ if you take a printer with the optimal functionality. For workers in creative and complex occupations, where 3D technologies are involved, it will be superfluous to pay attention to the models of 3D printers described above. Their price is high, but they are worth it. In addition, some models are indispensable if a function such as lamination is required, for example. Of course, for home use, such models are very expensive, but for business or companies can be just a godsend. Buying a device, always remember that the final price is made up of the cost of the printer and supplies to it.