Glue for plexiglas: description and reviews

A person today uses a lot of materials for different purposes, among them, Plexiglas, which is also called extrusion acrylic, should be highlighted. Sometimes you can hear one more name - Plexiglas. Probably, you have often encountered him, but very few people know about the specifics of working with him.

But if the work assumes the need for gluing, then this issue should be approached in more detail. For this material, one of the following adhesives may be used, each of which has its positive and negative sides. About them you can learn from the description and reviews of consumers.

Description and Feedback about Acrifix 117

Choosing glue for plexiglas, you can prefer the one that was mentioned above. According to consumers, this option is worthy among the rest. Some consumers consider it the best. However, this composition is convenient to use only in mass production. Why so - will be mentioned below.

Among the features should be allocated:

• High strength;
• durability;
• transparency;
• Rapidity of setting.

Buyers argue that this composition has many advantages, one of them is expressed in less toxicity compared with available dichloroethane. One can not help but note the high capillary properties, because the material penetrates deep into the cracks and narrow slits in the plexiglas. At the same time, as the buyers claim, the composition does not need to be influenced, it will drift by itself.

When choosing glue for Plexiglas, you should pay attention to some of the disadvantages of Acrifix 117, which consist in high cost and large volume of packaging. That's why for home gluing this composition is not very suitable, because it is realized in a container, the capacity of which is 1 liter. In addition, you can not find this mixture in all stores, last year for a liter of this glue would have to pay 6,000 rubles. It is possible that today the price will increase tirelessly. As a recommendation for use, it should be noted that for a better penetration of the mixture into small cracks it is necessary to dilute it with "Acryphix 116", applying a ratio of 1 to 10.

Description of the adhesive Acrifix 116

Glue for plexiglas is also on sale in the Acrifix 116. This composition is a more viscous mixture compared to the above. You can find it in tubes of 100 g, in density, the composition is similar to fresh honey, it has no color of glue. With its help it is convenient to glue together surfaces that do not differ in ideal evenness and have jagged roughness. In this case, the composition fills the material unevenly.

What they say about Dichlorethan

If you want to buy glue for plexiglass, then you should pay attention to "Dichloroethane", which is a good substitute for expensive compounds. It can be purchased in the department of radio components. To this glue, there is no need to add other components if the surfaces to be glued have an ideal evenness.

When carrying out the work, it will be necessary to press the parts well against each other. When gluing, consumers are advised to use a syringe, the composition is dialed inside, and after it is launched into the junction between the surfaces. With its help, according to users, you can easily glue the details, as a result you get a transparent seam that does not have bubbles. This glue for plexiglas transparent can be supplemented with sawdust or shavings of plexiglass, then the mixture will become thicker, and it will be possible not only to fill it, but also to spread on the glued parts. Consumers are advised to be careful when using this mixture, since it is poisonous. Therefore, it is especially recommended to protect it from children. Work should be carried out in a well-ventilated area, as far as possible from sources of fire. Store the adhesive consumers advise at room temperature. It is important to ensure that the liquid is not spilled in the room.

Information about acetic essence

If you are thinking about the question of how to glue plexiglass in the home, you can consider the use of acetic essence. According to buyers, for a number of properties this composition exceeds the industrial Acrifix. However, before gluing a large number of parts, it is first necessary to check the adhesive seam for durability. Consumers are advised to use vinegar essence very carefully. There are also disadvantages, manifested in cracks on the folds of parts, which in the process of exploitation will be strained.

Review and feedback on the compositions of COLACRIL-20 and COLACRIL-30

Many home masters wonder today about what kind of glue Plexiglas will suit. To do this, you can use one of the above mentioned compositions, they come to replace Acrifix 116. For gluing, these blends are best mixed together, while the first is liquid and the second is dense. According to customers, this allows to achieve good quality gluing.

If you compare with Acrifix, it can be noted that if the glue falls into the place of stress Plexiglas may appear cracks in the folds. As a result, the strength and appearance of the product are lost.

Description of UV-adhesive and reviews about it

UV-glue for plexiglass today is used quite actively. As the buyers say, do not put the composition in too much. Distribute the glue followed by a wavy line, after which the details should be well pressed against each other. If you did everything correctly, the glue will be distributed by itself on the seam. In order to achieve the solidification of the mixture, it must be irradiated with an ultraviolet lamp.

It is best to conduct these works in two stages. To begin with, the seam is treated to achieve a seventy percent strength, after the excess glue is removed and training is conducted. If you use this glue for Plexiglas, you can easily glue the details with your own hands, but for this it is recommended to use a long lamp that will match the length of the seam. Home masters note that the glue begins to harden after such an impact in about 35 seconds, but full hardening will come a little later.

Conclusion

You can use different compositions for gluing together Plexiglas, but when using UV glue, you can also glue ordinary glass. As a result, it is possible to obtain a completely inconspicuous seam, which can be operated at high humidity without loss of properties.

At the same time, it is possible to act on the seam mechanically, it can undergo serious strokes without breaking down. It is noteworthy that the seam can be operated with a wide range of temperatures, which vary from -40 to +150 ° C.