AutomobilesMotorcycles

Cross helmets with glass: advice on choice and feedback

There is a huge variety of helmets, but only in the cross model there is an oblong arc of elongated shape, the main task of which is to extinguish the energy arising from impact and deformation. The peculiarity of this design will save the lower jaw and the face of the athlete from blows in the fall.

Features of the construction of cross helmets

In practice, all helmets are designed according to a single principle. The outer shell of the product is very firm and reliably protects the head from mechanical damage. Under the shell is the inner layer, which distributes the remaining energy, not absorbed by the outer layer during the impact, and quenches it by squeezing its own fibers. There is also a belt with special soft cushions, which is fastened on the chin, thanks to which the helmet is firmly fixed on the head.

Tinting of the glass (visor) protects the eyes from sunlight and the ingress of small stones, dust and dirt. Cross-country helmets with glass appeared relatively recently. Prior to this, models without protective glass were manufactured, as it was intended to use special glasses. In such a shell, the pilot receives a sufficient amount of air, which is so necessary for intensive driving. In addition, the design of all models is equipped with multi-point ventilation.

What do the helmet layers consist of?

The helmet for a cross bike can be made by casting, which is carried out under pressure. As materials, plastic and various polyamides are used. As a rule, these polutorakilogramovye products are cheaper than multi-layer glued helmet. Such a shell is made layer by layer from a special fabric, followed by impregnation of each layer with carbolic resins. Often this is completely manual work, such cross-type helmets with glass are considered the most reliable.

Motorcycle helmet cross is covered with paint and varnish materials, resistant to sunlight and natural phenomena. In addition, they provide a long service life and prevent the destruction of the product. Even during manufacture, ventilation ducts are left in the front of the helmet, as well as in the temporal and parietal areas.

On the inner shell of cross helmets

Inside the helmet, foamed polystyrene is used to make the shell , which is compressed due to various impacts and deformations. This feature allows you to significantly reduce the free space inside the helmet when falling from a motorcycle and a strong impact. Thus, the head is practically immobilized, and the impact force softens.

It should be remembered that even a weak effect on the shell can lead to the fact that the protective functions of the helmet will be further minimized. Polystyrene does not return to its original state, so if the shells are damaged, the cross moto helmet needs to be replaced. On top of the inner layer is put on the lining, which is a light, well-ventilated material. If necessary, it can be washed and tidied up.

What types of helmets can I use for the off-road cross

For difficult off-road conditions, use a light helmet for cross-country motorcycle with excellent ventilation. Both models without glass, and a cross helmet with a visor has a visor that can be adjusted. He also performs a protective role and prevents the hitting of small objects in the face of the pilot, the rays of the scorching sun and flying precipitation. Such a shell for driving on difficult routes is called a cross helmet. It is not recommended to use it for driving in urban conditions, as it is not intended for driving in a gassy area. The same characteristics have a children's cross-helmet, which differs only in size.

Setting a high-quality visor (Pinlock)

The shell for off-road driving, in fact, is a cross helmet with a visor, which has sun protection functions. Besides this, you can install a Pinlock, which serves as a protective fog screen. In addition, the pinlock prevents fogging of the glass, which provides an excellent view. Such a helmet is cross-over with a visor that can be folded, easy to transport and convenient to store.

The most safe and easy is the shell-integral, which is preferred by almost all riders. It is recommended for beginners to choose bright models, which will make the athlete noticeable on the road. The most qualitative is a shell of carbon fiber, whose weight is 1 kg.

Motorcycle IXS for cross-country c visor HX207

According to the fans of extreme driving, one of the best is the IXS cross-head helmet with HX207 glass, which has excellent resistance to scratches. This shell is a black matte color made of heavy-duty polycarbonate and has a buckle clasp. The product is considered multifunctional, since in addition to heavy off-road conditions, it can be used in the city cycle.

The body of the product has ventilation ducts, as well as a breathing deflector. The glass does not fog, it is resistant to mechanical damage and protects the eyes from sunlight. The lining of the shell is removable, so it is easy to replace and wash. Cross helmets with HX207 glass provide maximum comfort and safety. In addition, they have the highest level of noise insulation. The weight of the product is 1.55 kg. This helmet is fully consistent with international safety standards.

Multifunctional shell SOL

Cross helmets with glass SS-1 (SOL) fully comply with DOT standards and they can be used in any weather year-round. The product is used as an element of head protection when riding sports and cross-country motorcycles, snow off-road vehicles and ATV-terrain vehicles. This helmet is made of a thermoplastic in two dimensions of the outer shell, which allows the pilot to choose the ideal variant for himself.

The shell has an aerodynamic shape and can be used in an aggressive environment.

The model provides for the possibility to install any screen at your discretion, including two-layer or with electric heating. In addition, instead of glass, you can use cross-glasses at the discretion of the rider. The face of the helmet provides an excellent view. A visor of removable type is installed on the shell. The SS-1 was tested in a wind tunnel and proved itself as a reliable protection.

A few words about the manufacturers

To famous brands whose products are certified and tested by a large number of users, include Racer, IXS, SOL Helmets, Arai and a number of others.

The high quality and reliability of these products guarantee to pilots a high level of safety. For example, the company Racer produces multi-composite helmet, in the production of which Kevlar and Fibreglass are used. Reinforcement of the shell with such materials for strength is many times higher than rolled steel.

You should be very careful when choosing a particular brand and beware of low-grade forgeries of artisan and Chinese production. The manufacture of such products does not involve the use of quality raw materials, besides they do not meet even the minimum safety requirements. Upon impact, such a shell can be scattered into many small fragments without having fulfilled its direct purpose. This should be remembered and not to save on one's own health and safety.

Fitting the shell

Having identified with the model of a cross helmet, it is necessary to take into account that it was precisely fitted to the head. For this, the shell needs to be deployed in such a way that the visor is directly in front of the face, and then take both hands by the straps near the attachment points to the helmet, and put it on the head. After this, it is necessary to fasten the belts in such a way that there is no discomfort. Then you need to move your helmet and visor in different directions, and make sure that nothing prevents. In this case, the product should sit on the head still and not cause discomfort.

Note that an oversized helmet will allow airflows to escape while driving, and in the event of an emergency, it will be almost useless. A small shell will unnecessarily squeeze the vessels of the head, which can affect the general condition of the body. This should also be taken into account when choosing a children's cross helmet, so the choice of protective equipment for the child should be carried out with special care.

Choose the size of a cross helmet

To determine the required shell size, the perimeter of the head in the upper part of the head should be measured.

In this case, it is necessary to take into account the anatomical features of the human skull, namely the length of the protuberances of the superciliary arches and the occiput. Measuring girth can be done using a centimeter. Girth should be carried over the ears, capturing the temporal lobes, and taking into account the above features. The resulting digit on the centimeter is the required size. Below is a table that shows the size of cross helmets, thanks to which you can quickly choose for yourself a suitable shell.

XXS XS S M L XL
51-52 53-54 55-56 57-58 59-60 61-62

In this case, the smallest size is considered to be XXXS ─ 49-50 cm, and the largest ─ XXL at 63-64 cm. It should be remembered that the helmet is slightly worn, especially if several people have tried it in the store. Therefore, you need to select the model that can potentially be bought by you, otherwise the shell will sit on its head a little differently. It is recommended to wear a balaclava for aggressive driving and during the cold season. Therefore, when determining the size and fitting it should be taken into account.

How to properly store and care for the cross helmet

Any pilot wants his helmet to remain in its original state, brand new and shiny, as long as possible. It is not recommended to clean the outer surface of the shell with soap solutions. For this purpose, use wet wipes or wet a soft cloth with a special solution. If the sticky gnat does not lag behind the glossy surface, you can put a damp cloth in hot water for a few minutes to the helmet. After cleaning the surface, it must be polished. This procedure should be carried out using a car polish wax, which is sold as aerosols. Excellent gloss can be achieved using flannel fabric or microfiber.

It is desirable to subject the lining to a hand wash, since when using the machine, it will quickly become unusable. As a detergent should use baby shampoos, you can dilute a weak solution of laundry soap. To ensure that the visor screen has served for a long time and provides an impeccable overview, it is necessary to use gentle cleaning solutions based on natural ingredients. Synthetic means very quickly destroy its surface. The helmet is sold complete with a special case, in which it is necessary to store the cross-shell after full cleaning. Not allowed to hit the helmet direct sunlight. Also, avoid falling the helmet to avoid spoilage.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.