Tuning "Renault Logan" with their own hands

"Renault Logan" is a brand of the car that has enjoyed wide popularity and demand among car enthusiasts over the past ten years. This is a simple explanation - practicality and reliability are perfectly combined with price and quality. On the roads of Russia this is one of the most common cars. And to make the car more unique will help tuning Renault-Logan, which not only emphasizes all the features of the brand, but also enhances comfort.

External improvements "Renault Logan"

The exterior tuning of the car has always been and remains more visible to others. For example, the installation of cilia on the headlights or "angel eyes" will give the model a refined, refined look. Replacing optics, installing fog lamps, a spoiler, and applying small drawings will make the car more attractive.

Not surprisingly, some drivers are making their own tuning "Renault Logan" (Phase 2). This model was launched in 2008 and as if it was created for revision. Modernization of the car can also be entrusted to experienced specialists of tuning salons, where everything will be done at the highest level. True, and money will have to put a lot.

"Renault Logan" - tuning by own hands (body kit)

External car tuning is difficult to imagine without such details as thresholds and a spoiler. Many consider such improvements as decoration only, and are very mistaken in this.

The main function of the thresholds is to protect the car body from various kinds of damages. The main enemy of the rapids is water. It causes corrosion and decay of the metal. Special lining for thresholds, which can be purchased at the store, will solve this problem. Their average cost is 1500 rubles.

Such a detail, like a spoiler, is needed by the car for stability on the road at high speeds, which, in turn, increases the controllability of transport. The spoiler also reduces the amount of dirt and moisture on the car's glass.

It is quite possible to make a device even at home. For work you will need:

• Sheet of iron.
• Styrofoam.
• Glue.
• Plaster.
• Paint.

To determine the shape of the spoiler, you first need to make a template. Suitable material is cardboard. Having tried it on the car and having defined with the form and the sizes, on it a blank for a spoiler from it is cut out. The sheet is pasted with foam, and then several layers of fiberglass are applied. It is best to apply three layers, each of which is fixed with an epoxy resin. The drying time of one ball is 4-5 hours. The next stage is the most important - priming and sanding of the spoiler. The aerodynamic qualities of the latter depend precisely on this stage. The smoother the spoiler, the better. The finishing touches are painting and installation.

Tuning "Renault-Logan" (optics)

Visibility on the road in any weather and at any time of the day depends on the quality of the installed optics. With surprises, which likes to present the weather, "perfectly" will cope with a set of fog lamps.

Correctly selected and installed fog lights will help not only to overcome fog and slush, but also increase visibility on the road at night.

Suitable colors of PTF - bright yellow and milky white. It is these shades best cope with rain and fog. The shape of the headlamps can be chosen any - round, rectangular or square - it all depends on where and how they will be mounted.

An important point - the installation of fog lamps. Their light beam should be pointed straight and slightly down. Only so the lights will fully cope with their functions. If the headlights can not be adjusted correctly, consult a specialist.

Let's add power to the engine!

Many drivers dream that their car was not only comfortable, but also fast. Therefore tuning "Reno-Logan" first of all begins with internal improvements.

One of the most common methods for increasing engine power is chip tuning. This procedure is performed by experienced specialists in the salons. It is impossible to make chip-tuning on its own, as it requires special equipment, which is refl ected by the electric engine control unit. Tuning engine "Renault Logan" on average is six to ten thousand rubles.

As a result of the reconfigurations:

• Engine power is increased by 5-7, sometimes 10 percent.
• Fuel consumption is reduced.
• Improves the dynamics of overclocking.
• The car accelerates faster.

Another way to increase engine power is to increase its capacity. This is done in two ways - they bore the cylinders for larger pistons or they change the crankshaft. Both can be done at home. To give speed will help and the replacement of the air filter.

LED Tuning

Nothing looks so gorgeous as the LED tuning for Renault Logan. LED lights are made for interior, license plates, for spoilers, discs, bottoms - in general, wherever possible.

You can build the lighting yourself, without resorting to the salon. In addition, the cost of this decoration will go to a minimum.

Effectively, "Renault Logan" will look like LED lighting discs. For work it is very convenient to use self-adhesive LED tape. Then you do not have to drill holes to install it. The meter of tape will cost 150-200 rubles. It is mounted directly on the disk casing. This version of fastening is the simplest and most common.

If no self-adhesive tape was found, do not get upset. In this case, on the disk casing, a suitable tool makes holes, to which a band is mounted using clamps. It also happens that the discs do not have a casing, then you can also make it yourself.

"Reno-Logan" -tuning with their own hands using LEDs - a pleasant experience! After all, this is one of the cheapest types of tuning!

Final touches

The final moment of Renault's reincarnation will be a small figure on the body. It can be made with paint (airbrush) or be a solid vinyl sticker.

Aerography is best provided for execution by specialists. For lack of experience, it will not be possible to apply a neat drawing yourself. In addition, you need a drawing tool, a good model of which is not so and cheap.

Vinyl stickers, on the contrary, can be applied in the home, without spending extra money for the salon.

If you choose between airbrushing and sticker, preference is best given to the latter. The sticker can easily be removed if you get bored, and after airbrushing you need a complete repainting of the car. And at a price, vinyl printing will cost several times cheaper.

Images on the car will give him an individuality and emphasize the driver's style. In addition, such tuning "Reno-Logan" is able to hide scratches, abrasions and chipped body.

Let's remember about the salon

To improve the comfort of the driver and passengers, you can make small improvements in the car. So, comfortable cloaks for seats can not only save the chairs from damage, but also massage your back or warm in the cold season.

Having installed a climate control system, the driver will forget about such a problem as heat and drafts. Particularly advantageous is the solution for "family" people, because at the same time in the cabin you can set several temperature regimes.

Conclusion

"Renault Logan" is a car that can be worked on indefinitely. The main thing - to stock up forces, ideas and finances. Improvement of this brand is quite possible to produce at home. Who knows, maybe in the future tuning to "Renault Logan" will not just be your favorite hobby, but even a profession!