HobbyNeedlework

Takes for the girl's spokes with a description. How to tie a beret for a girl with knitting needles

Headgear is worn for protection from cold or sun and for beauty. Universal hat - takes. In different designs, it can be worn at any time of the year, and it also suits both large and small, men and women. Yes, and sew or knit or crochet such a piece of clothing is not difficult. For example, you can bind a beret for a girl with knitting needles, with a description and a drawing pattern, even to the needlewoman who is just learning to work in knitting techniques.

And it takes

How to tie a beret for a girl with knitting needles, with a description of the work process? In three basic stages, after all, if you look at the design of the beret, you can see that each takes, whatever model it is, will consist of three main parts:

  • A rim that should be wrapped around the head, not allowing the beret to slide over your eyes and not squeezing it with a tight hoop;
  • The main part of the beret (thulia) - creates the volume of the headdress;
  • Bottom.

You can knit each part separately, but more often berets knit a single whole. The question of how to tie a beret for a girl with knitting needles will not be difficult if you take into account the stages of work, tying it gradually part by piece in accordance with the necessary dimensions.

From the very beginning

In order to tie a beautiful beret for a girl with knitting needles, it will be useful for beginners to learn that, whatever yarn is chosen for work, the spokes are selected to it according to the 2: 1 principle - the two-fold thread is equal to the thickness of the knitting needle. Such a selection of materials for knitting will make it possible to obtain high-quality knitting - moderately dense fabric, comfortable yarn with the right size spokes. Yarn for a beret is chosen depending on the season, when this garment is supposed to be worn. For summer berets, cotton or linen yarn is perfect, autumn options suggest the use of natural woolen and semi-synthetic yarn. For winter berets is suitable for textured yarn like "grass", mohair, thread in the addition of angora. In this case, the headdress will be warm, cozy.

To beret sitting

In any kind of clothing, the main thing is that it is comfortable. And headgear - no exception, because if the cap presses or creeps constantly on the eyes, it is very uncomfortable. That takes takes should sit perfectly. And for this, the bezel rim must match the size. The head circumference is measured by an ordinary centimeter tape. Then the sample is tied and the number of loops is calculated by the required number of centimeters of the head circumference. Even easier can be done if you knit the bezel separately, in the form of a ribbon. For example, double viscous. This is done so.

For example, you need a bezel 3 cm wide, and it will take 8 loops. Hence, on the need to dial 8 + 8 = 16 loops. The first row is knitted like this: 1 loop the front off, 2 loops off, leaving the thread in front of the knitting, loop the 3 loops, 4 again with the working thread before knitting - so until the end on the 16 loops - the odd ones are tied with the front loops, and the even ones are removed with the front Knitting a working thread. By this principle, all rows are knit - a double knit is obtained. Thus, to bind the beret for the girl with knitting needles, with the description of tying the crown and the bottom, even the beginning needlewoman can. After all, tie the tape to the length of the head circumference, and then dial the loop along the edge of the rim to work with the pattern - it's quite simple.

All the beauty in the band and on the bottom

If there is an idea to tie the beret for the girl with knitting needles, you can cope with the description of any model by setting a specific task for choosing the right figurine. After all, the beret can be tied with azhur, jacquard pattern, embossed viscous, using braids. All the beauty is on the band and bottom. They will give beret the necessary volume and conceived charm. Knitted beret for the girl with knitting needles with a description for the spring involves a phased implementation of all work. So, for example, if you tie a tape to the rim of the required size, you can make an openwork pattern from rapports according to the scheme below.

In order not to suffer from the addition of loops on the tunes, it's easiest to add them in the first row after the rim. The required number of loops is typed by twisted strings between the loops of the previous row. Using motifs, though openwork, even patterned jacquard, you can fill the whole beret field. When the headgear is given the necessary height, the bottom is simply to be unscrewed, if you evenly do six decreases in each second row. And these decrements fit well into the space between the motives, when the rapports are not related to each other, but are read separately, each by itself.

Takes for the girl for all seasons

How to tie a beret for a girl with knitting needles using a simple pattern? To begin with, it is necessary to measure the head of the child - the girth of the head. Tie a sample of the liked yarn with selected spokes. Then, calculating how many knitting loops you need for one centimeter, calculate the number of loops in the work. Type them on the spokes and tie the rim, for example, with an elastic band 1 x 1 or 2 x 2. The elastic looks gorgeous, in which the series consists of 1 purl loops and 2 facial loops, in each facial row the facial loops are swapped, and the purlins are tied Loops according to the drawing. Then for a beautiful beret you need to add the desired number of loops in the last row of the rim. For a more magnificent beret, the loops need more, for the modest, in the form of a cap, smaller. The beret's tulle is matched by the pattern you like. Then, at a height equal to the height of the model, it is necessary to make a bottom. If you evenly reduce the loops, making 6 equal decreases in each row, the bottom will turn out to be flat, reducing the uneven will give the bottom an irregular shape, which can give the beret its charm.

Beretik for one-year-old crumbs

Approximately at the age of one year, children begin to walk. Parents dress up their one-year-old crumbs, like dolls, despite weekdays and holidays. Beautifully tied beret for the girl with knitting needles (1 year - a beautiful age to give her such beauty), will allow to dress up the baby every day. The only thing that takes for such a crumb is a comfortable hat for the summer. Cool autumn and winter frosts require a more serious headdress - on the strings.

The summer beret is best knit from natural thread - linen or cotton. Needles for such a yarn will fit more thin - 1, 5 or 2. For baby, the beret will be more convenient if the rim to it is knitted with a double ribbon - it can be inserted into a regular linen gum, then the beret will not slide and fall down. Canvas beret for a one-year-old child can be made not difficult - for example, to draw a simple openwork - through 5 eyelets to make a napkin and two loops together facial. Such holes can be scattered on the canvas in the form of tracks or chaotically. Such a job will be handled even by a beginner skilled worker.

Fashion for 3 years

Kids like to dress up, and a beautiful knitted beret for girls with knitting needles, 3 years of which have been celebrated not so long ago or are just about to celebrate, will become a real decoration for a small fashionista.

It is very simple to tie a beret with an uncomplicated description. On the spokes number 3, dial 88 loops. Having drunk 4 centimeters of rubber band 1 x 1, connect one row with facial, and bind the second row with the back, then again with 4 cm elastic band. In the last row evenly add loops = 132 loops twisted from the broaches 44. On these 132 loops, connect 40 rows to the face surface. Then, in order to get the bottom, you need to reduce 11 loops in each face row, tying two loops together with the front one. Emerald rows knit unchanged. All reduction is best done on the same loops, then you will get beautiful paths that form a symmetrical pattern. When 12 spokes remain on the spokes, the thread must be cut off and stretched through the remaining loops. Then pull them together, and stitch the stitches, at the same time sewing the bezel, twisting it twice.

This is quite simple, if you can say so, the fundamental model of beret for the girl. But such a headdress can be decorated at will - flowers, beads, brooches - everything that can attract a little fashionista.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.