Sidushka on a chair with his own hands: a variety of shapes and colors

There are a lot of yarns of different shades and textures, but is it about the same thickness? It is worth thinking about how to diversify the interior. And an assistant in this matter will be a new seat on the chair. You can, for example, crochet it with your own hands .

Variant of interlaced strips

Its basis is a set of narrow bands. Even the beginning needlewoman can cope with this. It is enough only to master the knitting of the main posts. Strips should be such that their length is enough for the seats on the chairs. And you need to make a little more stock on the weave. The thickness of such strips, too, should not be very large.

Half of them need to be fastened, having connected on their narrow edge a row of columns without a crochet. Then lay one of the free interlacing with the fixed ones. The second to lay on other strips, to make a similar basket. And so on to the end.
Then tie the other three sides. It turns out a pretty sidushka on a chair with your own hands.

Square with brushes

Its basis can be any pattern for the grandmother's square. Only the size of the seat on the chairs (crochet) should be appropriate. If you knit it in one layer, then you need a thick yarn. From the one that is thinner, it is recommended to make mini-pads.

As a variant of the pattern, the one that is placed on the diagram below is quite suitable. Since there are only 11 rows in it, the yarn will need a thick yarn. Although no one forbids the use of thin in a few additions.

For decoration fancy tassels fit. They will need to be made from a small number of sliced threads, the length of which is twice that of the final brush. In the middle, fix with a thread and tie a short chain, which it will be attached to the seat. Two halves of the brush are joined together and tied with a thread. It remains only to sew them in the corners. Such an associated cushion-seat on the chair with their own hands can become an original gift.

In the form of a hexagon

It will be necessary to link six parts. Their shape is a trapezoid. The bottom and top base of which are equal to 37 and 18 cm respectively. The height of the workpiece is 14.5 cm. For such a seat on the chairs (crocheted) the circuits should be the simplest. For example, all rows can be made from connecting bars. In order for the product to be denser, you can choose for knitting half-loops with a crochet. In order to still have some kind of drawing, it is recommended to perform two or three wide bands of different colors. And the lower one looks better from a contrasting hue.

Then they need to be sewn. The lateral side of the second trapezoid is connected to the upper base of the first. The same side of the third will be sewn to the second side of the first and upper base of the second one. Thus, it should turn out that all the sides are sewn. The outer part of the seat forms the upper bases of the trapezoids.

It remains to wrap the same contrasting color all the seat on the chair. Finish the edge with an openwork pattern along the entire perimeter. And now the seat on the chair with his own hands is ready.

On a round seat

The principle of its manufacture is based on a circular pattern. So there used to be mats in villages. Why not tie a bright and cute sidushka?

Yarn is good to choose one thickness and many different shades. And each new series knit another color. It will be bright. She will go to the kitchen, made in any color scheme.

Start knitting the crochet on the crochet chairs (outline) with a small ring of air loops. Their number depends on the thickness of the yarn. Then tie into the ring 12 columns without a crochet. This is the first row.

In the 2 nd - from each vertex it is required to execute two columns with a crochet. The middle of the seat must be sufficiently dense, therefore there will not be openwork patterns yet.

The third row consists of triple columns with a crochet, tied in the spaces between the double columns of the previous row. It turns out a beautiful figure and a dense pattern.

In the 4 th row, you should tie the bars with the crochet between each three of the previous row. And also from each column of the triple. Should get a number of slender posts.

The 5th row consists of the same columns. Only in every fourth loop should they be tied in two. This increase is necessary to expand the circle.

In the 6th row, three bars with a crochet should be tied in each third loop. Separation between them will be one air loop. Just execute the 7th row. The fan of the columns is located in the arch.

The 8th row consists entirely of columns with a crochet from each loop. In the arches of the air loops of the columns should be 2.

9th - skipping one loop, knit in each second two bars. 10th - repeats the 9th, the columns come from the arches. The 11th row is formed from columns without a crochet in each loop.

12th - repeats the 5th. The 13th row is a repeat of the 11th. If this diameter is enough, then the work is finished. For a larger siddush pick up a pattern from the columns with or without a crochet.

Lace of flowers

Choose any pattern of the flower that the force of the needlewoman. Bind the number of copies so that they are enough for the entire seat on a chair or stool. They can be the same color or two or three. And someone will make them all the shades of the rainbow.

Then you should connect all the flowers to each other. You can simply sew or fasten them when tying. For the convenience of fastening to the seat, it is recommended to tie several strings of sufficient length.