Computers, Equipment
Settings "Micro". MikroTik: quick setup of the access point
Now more and more companies want to make one information network, so this issue is topical. In order to combine signals, it is necessary to work correctly with the parameters of the equipment. роутер MikroTik . The article will discuss how to configure the MikroTik router .
Total information
In general, models from this manufacturer are considered suitable for work both at home and in the office. You can even create a large grid for working with a large number of office employees. The router at the expense of its performance will allow to work both in large rooms and in small ones.
Features
Sometimes there may be problems with the network when the client is behind NAT. In this case, when working with the L2TP protocol, problems such as packet blocking can occur. To solve this problem, follow the instructions in the operating instructions. This protocol has its drawbacks. For example, when working with it, security and performance levels are greatly reduced. So, you have to use IPSec technology. It allows to increase the level of security. Because of this, the performance drops even more. In general, these technologies work fine, well perform other options, so the loss of performance can be called a security payment.
Server
Setting up WiFi
Once the profiles have been created, you must configure the Wi-Fi module. To do this, you need a Winbox program. In it, you need to start and select the wireless connection option. Setting "Micro", if it concerns an access point, is as simple as possible. After that, you will need to enter all the correct values, go into the VLAN1 properties, select there work with wireless access points. In order for all settings to be correctly specified, you must select the HTC option. You may need to adjust a number of data. It is necessary to ask them from a specialist (provider). If you know that you do not need to specify any additional data, you can go to the "Security" menu. Here you need to go to the Default section, then configure the encryption scheme. It is desirable, in addition, to install encryption. Thanks to him will be able to set a password on his access point. Configuring the router in this regard is fairly easy, security is much easier to maintain than on other wireless devices. It should also be understood that encryption is not the only thing that should protect the access point, so you need to come up with a complex password.
Strengthening security
Configuring Network Interfaces
A fairly common problem is the configuration of network interfaces on some routers from this manufacturer. Let us consider one of the solutions to this problem. Before you start working with the router, you must reset all factory settings. That is, you need to go to the "Control Panel", select this device and reboot, resetting all options. If necessary, you should update the firmware. In order for the router to work correctly and provide a stable access point, it is necessary to properly configure the network interfaces. If you want, you can use an algorithm that allows the addresses in the router to be created automatically. That's why this router is too easy to use. To do this, go to the IP section, after selecting the DHCP function, set the settings. They should specify that NPT servers will be automatically exposed.
If you connect to the Internet through the PPPoE interface, you should select the PPP menu. After that, the "Micro" setting is activated, that is, its client. It selects options that fully support the operation of network equipment. Some network administrators prefer to manually specify IP addresses. That's why if the cooperation is with such a provider, then you need to go to the IP item and after the option "Addressing" select the necessary settings. Often, you will have to choose the port to which the cable from the provider is connected. It is necessary to pay attention, that it is necessary to specify and a mask of a subnet. Accordingly, it is necessary to use the documents from the provider and make sure that all data is correct. In the event that the IP-address is specified manually, it is necessary to set all the route parameters by default. It is for this to select the IP item, after activating the desired route. роутера MikroTik будет обеспечиваться Wi-Fi мостом. The correct operation of the MikroTik router will be provided by a Wi-Fi bridge.
Similar articles
Trending Now