Refueling is not an expensive pleasure

Perhaps the most frequent cause of the air conditioner failure is the loss of refrigerant as a result of its leakage. When the compressor is running, its cooling is provided by freon, but if the level of the substance that lowers the temperature is insufficient, the machine overheats, the mechanism becomes jammed, and as a result, repair becomes necessary. The cost of new equipment can fly in a pretty penny. It costs almost half of the air conditioner. Therefore, be attentive to the maintenance of your household appliance. To fill the air conditioner in time means to ensure a good work of the compressor and the whole device as a whole. Do not neglect it.

Service

In order to properly fill the cooling equipment, you need to know exactly how much Freon is required. Actually, from the decision of this, apparently, simple task and the further work of the device will depend. As a rule, the technical documentation always contains information on how much time must pass before you need to fill the air conditioner. Typically, the refrigerant charge depends on the installed equipment, the length of the pipeline and, of course, the operating mode. So, for example, air conditioners that do not have high power have a well-defined normalized volume of fueling. But in the case of high-performance equipment specialists allow a small level of error in the process of determining the amount of Freon.

Fill the air conditioner with pressure

This technique is applicable only if there is an accurate manufacturer's data. The container with the cooling substance is connected to the system by means of a special manometric collector. Then refueling is carried out in strictly dosed portions. The manometer compares the figures with the regulatory data immediately after each injection. Thanks to this, the ideal refilling of equipment is ensured. It should be noted that such work is carried out only by highly qualified technical service personnel. Depending on the chosen method, different time is required in order to fill the air conditioner.

Refueling by overheating

This method is based on measuring the temperature, depending on it, the possibility of refueling is determined. We will not go into all the details of the process, let's just say that it is much more complicated than the previous one. It requires more sophisticated equipment, and high qualification of maintenance personnel. Naturally, each method has its pros and cons. It is chosen according to the individual features of the device and the conditions in which it is installed.

And how much does it cost to fill the air conditioner? It is better to ask this question to the employees of the service center. The cost is calculated based on the size of the equipment and a number of other factors. Approximately this service will cost you from 2 thousand rubles and more. And how often to refuel the air conditioner, the normative documentation, which necessarily accompanies the cooling device, will best tell.